Material Test
Mostrando 13-24 de 1983 artigos, teses e dissertações.
-
13. Reliability assessment of cold-formed steel beams by the FORM method
Abstract This article presents a procedure for the reliability assessment of cold-formed steel beams based on the Direct Strength Method (DSM) and the Effective Section Method (ESM). Using a comprehensive database, a statistical analysis of the test results was performed to determine the statistical properties of the professional factor random variable. The
REM, Int. Eng. J.. Publicado em: 2021-06
-
14. Chemical Characteristics and Antioxidant Activity of Astaxanthin Extracted from Shrimp Residues Using Soybean Oil
Shrimp residues generated by the seafood industrial processing are generally discarded in the environment without any further treatment, leading to a loss of nutritional value such as proteins, lipids, chitin, carotenoids, and minerals. This practice can lead to environmental problems due to the decomposition of these substances in the air. The objective of
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
15. TITULADOR AUTOMÁTICO EM FLUXO-BATELADA UTILIZANDO UM HARDWARE DE CÓDIGO FONTE ABERTO ARDUINO
This work describes the development of an automatic titrometric method in flow-batch with potentiometric detection using alternative and easily accessible materials. Arduino board and its modules, solenoid valves to control the flow rate, peristaltic pump to propel and suction fluids and tubes of inert material to connect the different parts of the Flow-Batc
Quím. Nova. Publicado em: 2021-03
-
16. Laboratory diagnosis of COVID-19
Abstract Objectives: This was a non-systematic review of the literature on the laboratory diagnosis of COVID-19. Data sources: Searches in PubMed and Google Scholar for articles made available in 2020, using the terms “diagnosis” OR “diagnostic” OR “diagnostic tests” OR “tests” AND “COVID-19” OR “SARS-CoV-2” in the title. Summary o
J. Pediatr. (Rio J.). Publicado em: 2021-02
-
17. SEQUENTIAL MULTI-ELEMENT DETERMINATION OF TRACE-METALS IN BIODIESEL SAMPLES USING HR-CS FAAS
In this work the feasibility of sequential multi-element determination of Zn, Fe, Mg, Cu, Na, K, Cr, Al and Ca in biodiesel samples by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS) was investigated. Biodiesel samples obtained from different sources and different chemical processes were analysed. The samples were diluted w
Quím. Nova. Publicado em: 2021-02
-
18. Effect of Different Dimensions of Test Samples on the Volumetric Change Assessment Of Endodontic Materials
Resumo Novas metodologias utilizando micro-CT são propostas para avaliar a solubilidade além de alterações dimensionais e morfológicas em materiais endodônticos. No entanto, não há padronização nos métodos. O objetivo deste estudo foi avaliar o efeito de diferentes dimensões de corpos de prova na avaliação da alteração volumétrica de diferen
Braz. Dent. J.. Publicado em: 2021-02
-
19. MÉTODO MANUAL PARA DEPOSIÇÃO DE TINTAS FOTOLUMINESCENTES BASEADAS EM LOFS MISTAS APLICADO A CODIFICAÇÃO DE DOCUMENTOS
In this work, the process of synthesis of Metal-Organic Frameworks containing lanthanide ions (LOFs), accelerated via a precipitating agent, capable of accelerating the process of nucleation of MOF crystals, in order to explore the optical properties of this precursor solution (SP_Gd/EU-MOF), as a quick-response photoluminescent material in the coding of off
Quím. Nova. Publicado em: 2020-12
-
20. Heat treatment analysis of ASTM A106 steel spheroidization and erosive wear at high temperatures
Abstract The microstructures of steels are altered when exposed to high working temperatures for long periods, which results in varied physical and chemical proprieties. This study evaluates the erosive wear behavior of ASTM A106 steel after it is exposed to high temperatures for long durations. Samples of normalized ASTM A106GrB steel were placed in a muffl
REM, Int. Eng. J.. Publicado em: 2020-12
-
21. Large strain consolidation analyses of fine tailings disposal in mining pits
Abstract Herein, three-dimensional analyses of large strain consolidation applied to tail ings disposal in mining pits is studied. The main goal is to estimate filling time and, ac cordingly, the capacity of the pit. Other useful results, such as dry density profiles and water pore pressure generation are also obtained. Two different slimes from the iron or
REM, Int. Eng. J.. Publicado em: 2020-09
-
22. Preserve Planet EARTH. If not you, WHO? If not Now, WHEN?
Abstract Herein, three-dimensional analyses of large strain consolidation applied to tail ings disposal in mining pits is studied. The main goal is to estimate filling time and, ac cordingly, the capacity of the pit. Other useful results, such as dry density profiles and water pore pressure generation are also obtained. Two different slimes from the iron or
REM, Int. Eng. J.. Publicado em: 2020-09
-
23. EFEITOS DA CANOAGEM NAS HABILIDADES MOTORAS DE CRIANÇAS E ADOLESCENTES COM SÍNDROME DE DOWN
RESUMO Introduction Down syndrome (DS) is a genetic condition characterized by an inadequate numerical distribution in chromosome pairing, with extra genetic material related to pair 21 leading to alterations that affect the development of several motor components. Objective To analyze the effects of kayak training for eight weeks on the gross motor skills
Rev Bras Med Esporte. Publicado em: 2020-08
-
24. Heterogeneity test for optimising nickel sampling protocols
Abstract Fundamental Sampling Error (FSE) is generated whenever a sample is taken from a lot of particulate material and is caused by an intrinsic characteristic of every mineral deposit: the constitutional or intrinsic heterogeneity of the ore. FSE is the only error that can never be eliminated in sampling processes, but it can be reduced to acceptable valu
REM, Int. Eng. J.. Publicado em: 2020-06