Material Resistance
Mostrando 1-12 de 886 artigos, teses e dissertações.
-
1. Influence of the addition of niobium oxide on the properties of fused aluminum oxide used in abrasive tools
Abstract Fused alumina is a material used in the manufacturing of abrasive tools, due to its high fusion point, great hardness, and mechanical toughness. In this context, this study addressed the influence of niobium addition on the properties of fused alumina for abrasive applications. A comparison was also made between this oxide and the brown fused alumin
Cerâmica. Publicado em: 2022
-
2. SYNTHESIS OF TOLUENE DIISOCYANATE URETHANE PREPOLYMER USING CASTOR OIL AND EVALUATION OF MECHANICAL PROPERTIES
This research is the synthesis of urethane prepolymer cast elastomer which had been produced using toluene diisocyanate and castor oil to replace the synthetic polyol, from petroleum origin, and the evaluation of mechanical properties of the polyurethane. The focus was to replace polyol from petroleum to vegetable material looking for renewable resources. Th
Química Nova. Publicado em: 2022
-
3. Fracture resistance of pressed ZLS crowns versus pressed LD crowns under thermo-mechanical cycling
Resumo Este estudo teve como objetivo avaliar a resistência à fractura do silicato de lítio reforçado com zircônio todo o material cerâmico "Celtra Press" em comparação com um "IPS e-max Press" em condições orais simuladas. Quatorze coroas cerâmicas foram fabricadas em moldes epóxi que foram duplicados a partir de moldes principais de aço inoxid
Brazilian Dental Journal. Publicado em: 2022
-
4. Is the best resistance strategy against begomoviruses yet to come? A Comprehensive Review
RESUMO A disseminação mundial de geminivírus e seu vetor tem sido atribuída à alta taxa de recombinação, mutação, presença de hospedeiros alternativos, transporte de material vegetal, atividade humana e o comércio globalizado, novas práticas agrícolas e mudanças climáticas. Portanto, as doenças virais mais graves cresceram em quase todas as c
Summa Phytopathologica. Publicado em: 2022
-
5. The importance of education
Abstract The present research is dedicated to analyzing the addition of sawdust biomass, which is a carbonaceous raw material that may be used in coal blends for the production of metallurgical coke, preserving the required quality, with lower cost. The quality of metallurgical coke may be determined by the efficiency of its chemical, physical and thermal fu
REM, Int. Eng. J.. Publicado em: 2021-06
-
6. Quality evaluation of metallurgical coke produced with sawdust and different mixtures of coal
Abstract The present research is dedicated to analyzing the addition of sawdust biomass, which is a carbonaceous raw material that may be used in coal blends for the production of metallurgical coke, preserving the required quality, with lower cost. The quality of metallurgical coke may be determined by the efficiency of its chemical, physical and thermal fu
REM, Int. Eng. J.. Publicado em: 2021-06
-
7. Evaluation of the use of silica-alumina refractory waste as a supplementary cementitious material
Abstract The use of supplementary cementitious materials (SMCs) is one of the three essential factors for the sustainability of the cement industry. To reduce CO2 emissions, several studies have introduced new methods for the utilization of industrial wastes such as the addition into cementitious materials. The objectives of this study were to chemically and
Cerâmica. Publicado em: 2021-06
-
8. Reliability assessment of cold-formed steel beams by the FORM method
Abstract This article presents a procedure for the reliability assessment of cold-formed steel beams based on the Direct Strength Method (DSM) and the Effective Section Method (ESM). Using a comprehensive database, a statistical analysis of the test results was performed to determine the statistical properties of the professional factor random variable. The
REM, Int. Eng. J.. Publicado em: 2021-06
-
9. Indicator kriging applied to RMR geomechanical modelling in a Pb-Zn deposit case study
Abstract The opening of a mining enterprise requires knowledge of the geomechanical characteristics of the mineral deposit, which will be worked according to the use of parameters of stability and/or resistance of the material, as well as the discontinuities present in the rock. In this study, the Rock Mass Rating methodology was used to propose a geomechani
REM, Int. Eng. J.. Publicado em: 2021-06
-
10. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
11. CARACTERIZAÇÃO FÍSICA E QUÍMICA DA BIOMASSA USADA COMO COMBUSTÍVEL SÓLIDO EM UMA CALDEIRA
Biomass is a renewable energy source most used in the world, however, depending on the chemical properties and origin of the material used as biofuel, the amount of ash generated during combustion can be high, harming the energetic harnessing. The objective of this study was to characterize chemically and physically biomass: bark, sawdust, and urban pruning;
Quím. Nova. Publicado em: 2021-01
-
12. Heat treatment analysis of ASTM A106 steel spheroidization and erosive wear at high temperatures
Abstract The microstructures of steels are altered when exposed to high working temperatures for long periods, which results in varied physical and chemical proprieties. This study evaluates the erosive wear behavior of ASTM A106 steel after it is exposed to high temperatures for long durations. Samples of normalized ASTM A106GrB steel were placed in a muffl
REM, Int. Eng. J.. Publicado em: 2020-12