Manganese Oxides
Mostrando 1-12 de 47 artigos, teses e dissertações.
-
1. Influence of Mn2+ ions on depression of quartz and spessartine in gondite ore
Abstract Low-grade manganese ores that are composed of manganese oxides, wad, quartz, iron oxides, gibbsite, and especially of spessartine (Mn3Al2(SiO4)3) are known as gondite. Spessartine is a mineral with a high content of silica (SiO2) and alumina (Al2O3) that causes a decrease of the enrichment in manganese oxide concentrates by flotation, giving this o
REM, Int. Eng. J.. Publicado em: 2021-01
-
2. Experimental and Theoretical Study of LiMn2O4 Synthesized by the Solution Combustion Method Using Corn Starch as Fuel
Lithium manganese oxide, LiMn2O4, was synthesized in two temperature stages, where the first consisted by an ecofriendly solution combustion method at 300 °C. Finally, the as-burned powders were thermal treated at 500 and 700 °C. The structural and morphological changes were evaluated by the Rietveld method and density functional theory (DFT) calculations.
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
3. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
4. Análise da geração de energia elétrica por meio da utilização de conversores do tipo TEG em lingotamento contínuo de aços
RESUMO A fabricação do aço é um processo que requer enormes quantidades de recursos, como por exemplo combustíveis, minério de ferro, carvão, entre outros. Com a crescente preocupação com o meio ambiente, seja pelas cargas ambientais ou pelo aquecimento global, cresce também a necessidade do desenvolvimento de novas tecnologias que possibilitem um
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Removal of Orange G Dye by Manganese Oxide Nanostructures
Two types of manganese oxide were investigated for the removal/degradation of Orange G (OG) dye in aqueous solution. One manganese oxide (pyrolusite) was obtained commercially and the other (birnessite) was prepared according to the polyol method by means of the oxidation of MnII hydroxide by H2O2. Both materials were characterized by X-ray diffraction (XRD)
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
6. DISPONIBILIDADE DE NUTRIENTES E CARBONO ORGÂNICO EM SOLOS CONTENDO CARVÃO HIDROTÉRMICO LAVADO E NÃO LAVADO E COMPARAÇÃO COM SOLOS ANTROPOGÊNICOS
Hydrochar washed (1.0, 2.5, 5.0 and 10.0 %) and not washed (10.0%) produced by hydrothermal carbonization using vinasse and sugarcane bagasse was applied in sand, ultisol and oxisol columns, and the release of NO3-, Orthophosphate, SO42-, Total Organic Carbon (TOC), H+ were evaluated for 30 days. These results were compared with the release of these paramete
Quím. Nova. Publicado em: 02/05/2019
-
7. De-NOx Performance and Mechanism of Mn-Based Low-Temperature SCR Catalysts Supported on Foamed Metal Nickel
A series of manganese-based catalysts supported on foamed metal nickel (FMN) with various Mn/Ni ratios was prepared for low-temperature selective catalytic reduction (SCR) of NO with NH3 (NH3-SCR). The effects of calcination temperature, amount of added Mn, optimal operating conditions, and H2O on the elimination of nitrogen oxides (de-NOx) performance of ca
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
8. SEPARATION OF ZINC FROM MANGANESE BY SOLVENT EXTRACTION FROM ACIDIC LEACHATES OF SPENT ZINC-MnO2 DRY CELLS USING NEUTRAL ORGANOPHOSPHORUS EXTRACTANTS
This paper describes a route for recovering manganese and zinc from spent zinc-MnO2 dry cells via acid leaching using sulfuric or hydrochloric acids as leachants. Hydrogen peroxide was added as reductant. Experiments were run at 25-40 °C for 1-3 h. Under the best optimal conditions, over 97.5 wt.% of zinc and manganese were leached by both acids. Zn(II) was
Quím. Nova. Publicado em: 2018-07
-
9. Electrocatalytic Oxidation Removal of Phenol from Aqueous Solution with Metal Oxides Doped Carbon Aerogel
Metal oxides (manganese oxide, MnO, manganese dioxide, MnO2, copper oxide, CuO, zinc oxide, ZnO and nickel oxide, NiO) doped carbon aerogel (CA) were prepared and used as catalysts in heterogeneous oxidation of phenol from aqueous solution in a three-dimensional (3D) electrode reactor. Textural characterization of metal oxides doped CA showed that the metal
J. Braz. Chem. Soc.. Publicado em: 2018-04
-
10. Chemical and mineralogical characterization of silicon manganese iron slag as railway ballast
Abstract In nature, metal ores such as iron, lead, aluminum and others are found in an impure state, sometimes oxidized and mixed with silicates of other metals. During casting, when the ore is exposed to high temperatures, these impurities are separated from the molten metal and can be removed. The mass formed by these compounds is slag. Slag is the co-prod
REM, Int. Eng. J.. Publicado em: 2017-12
-
11. SUPPORT EFFECT ON THE STRUCTURE AND PROPERTIES OF MANGANESE OXIDE ELECTRODE MATERIALS
The composite electrode material of manganese oxide supported on poly glucose (PGS) was prepared by using KMnO4 as manganese source. In order to study the influence of the support on the structure and properties of the composite electrode materials, the changes of the composition of the composite electrode materials were investigated in different weight rati
Quím. Nova. Publicado em: 2017-10
-
12. Kinetics Oxidation and Characterization of Cyclically Oxidized Layers at High Temperatures for FeMnSiCrNiCe and FeSiCrNi Alloys
Conventional stainless steels are used in cyclic oxidation, but the high amount of Cr and mainly Ni increase the price of these alloys. The objective of the present study was to assess the cyclic oxidation resistance of FeSiCrNi and FeMnSiCrNiCe alloys in comparison to AISI 304 and AISI 310 stainless steels by evaluating the oxidation kinetics and using char
Mat. Res.. Publicado em: 18/09/2017