Linear Equations Systems
Mostrando 1-12 de 145 artigos, teses e dissertações.
-
1. Correlations of rock mass classifications applied to ferruginous caves
Abstract For the Brazilian iron ore mines, the presence of caves presents a challenge, since most of them are located within the ore deposit. The National Environment Commission (CONAMA 347 Resolution/2004) establishes that the speleological heritage, as well as its area of influence, cannot sustain irreversible environmental impacts. The physical integrity
REM, Int. Eng. J.. Publicado em: 2020-06
-
2. And people already ask with malice: Where is ...
Abstract For the Brazilian iron ore mines, the presence of caves presents a challenge, since most of them are located within the ore deposit. The National Environment Commission (CONAMA 347 Resolution/2004) establishes that the speleological heritage, as well as its area of influence, cannot sustain irreversible environmental impacts. The physical integrity
REM, Int. Eng. J.. Publicado em: 2020-06
-
3. Time Domain Modeling and Simulation of Nonlinear Slender Viscoelastic Beams Associating Cosserat Theory and a Fractional Derivative Model
Abstract A broad class of engineering systems can be satisfactory modeled under the assumptions of small deformations and linear material properties. However, many mechanical systems used in modern applications, like structural elements typical of aerospace and petroleum industries, have been characterized by increased slenderness and high static and dynamic
Lat. Am. j. solids struct.. Publicado em: 2017-01
-
4. A time-domain finite element model reduction method for viscoelastic linear and nonlinear systems
AbstractMany authors have shown that the effective design of viscoelastic systems can be conveniently carried out by using modern mathematical models to represent the frequency- and temperature-dependent behavior of viscoelastic materials. However, in the quest for design procedures of real-word engineering structures, the large number of exact evaluations o
Lat. Am. j. solids struct.. Publicado em: 2015-06
-
5. A New Jacobi-based Iterative Method for the Classical Analysis of Structures
Abstract Traditionally, classical methods of structural analysis such as slope-deflection and moment distribution methods (Cross method) are used for primary analysis of structures and also controlling the results of computer programs. The main objective of this paper is to introduce a new method for classical computing and extending it to a matrix formulati
Lat. Am. j. solids struct.. Publicado em: 2015
-
6. PRECONDITIONING ISSUES IN THE NUMERICAL SOLUTION OF NONLINEAR EQUATIONS AND NONLINEAR LEAST SQUARES
Second order methods for optimization call for the solution of sequences of linear systems. In this survey we will discuss several issues related to the preconditioning of such sequences. Covered topics include both techniques for building updates of factorized preconditioners and quasi-Newton approaches. Sequences of unsymmetric linear systems arising in Ne
Pesqui. Oper.. Publicado em: 2014-12
-
7. Integral transform solution of natural convection in a square cavity with volumetric heat generation
The generalized integral transform technique (GITT) is employed to obtain a hybrid numerical-analytical solution of natural convection in a cavity with volumetric heat generation. The hybrid nature of this approach allows for the establishment of benchmark results in the solution of non-linear partial differential equation systems, including the coupled set
Braz. J. Chem. Eng.. Publicado em: 2013-12
-
8. Numerical analysis of phase decomposition in A-B binary alloys using Cahn-Hilliard equations
The analysis of phase decomposition was carried out using the nonlinear and linear Cahn-Hilliard equations in a hypothetical A-B alloy system with a miscibility gap. These equations were solved by the explicit finite difference method assuming a regular solution model. The supersaturated solid solution and decomposed phases were considered to have an fcc str
Mat. Res.. Publicado em: 28/05/2013
-
9. Vibrations of beams with a variable cross-section fixed on rotational rigid disks
The work is focused on the problem of vibrating beams with a variable cross-section fixed on a rotational rigid disk. The beam is loaded by a transversal time varying force orthogonal to an axis of the beam and simultaneously parallel to the disk's plane. There are many ways of usage of the technical moveable systems composed of elements with the variable cr
Lat. Am. j. solids struct.. Publicado em: 2013-01
-
10. CONTRIBUIÇÃO AO ESTUDO DE CAMPO CRISTALINO E TRANSIÇÕES 4f-4f EM SISTEMAS CONTENDO LANTANÍDEOS. / CONTRIBUTION TO THE STUDY OF CRYSTAL AND FIELD 4F-4F TRANSITIONS IN SYSTEMS CONTAINING LANTHANIDES.
A theoretical study of the interactions between the 4f electrons in lanthanide ions (Ln3 +) with the chemical environment was made using crystal field theory. The main effects were studied: change in position of the berycentre of the energy levels of the free ion, maximum splitting of the J level and contribution to 5D0-7F0 transition of Eu3+ ion. Use of sec
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/09/2012
-
11. Extração dos parâmetros de módulos fotovoltaicos a partir da solução de um sistema de equações não lineares utilizando técnicas da região de confiança / Extraction of parameters of photovoltaic modules from the solution of nonlinear equation systems using thrust region techniques
Este trabalho apresenta uma metodologia para extração dos parâmetros característicos de um painel fotovoltaico. A partir dessa metodologia é possível verificar a mudança dos parâmetros de um painel ao longo do tempo. Após a apresentação da teoria na qual se fundamenta a metodologia aplicada e a descrição de programas de computador, é apresentad
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/04/2012
-
12. Análise do comportamento eletroaeroelástico de uma seção típica para geração piezelétrica de energia / Electroaeroelastic behavior analysis of a typical section for piezoelectric energy harvesting
Converting aeroelastic vibrations into electricity for low power generation has received growing attention over the past few years. In addition to potential applications for aerospace structures, the goal is to develop alternative and scalable configurations for wind energy harvesting to use in wireless electronic systems. The use of a typical airfoil sectio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/02/2012