Laser Of Solid State
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Influence of Si Coating on Interfacial Microstructure of Laser Joining of Titanium and Aluminium Alloys
A common phenomenon in the dissimilar joints is the presence of brittle compounds in the joining interface region. The brittle phases can decrease by introduction of interlayers in the joining interface, such as silicon, that inhibits the formation of Al3Ti and AlTi3 phases in joining process between titanium and aluminium alloys. In the present work, the jo
Mat. Res.. Publicado em: 09/11/2017
-
2. Effect of Solid-State Laser Parameters on the Surface's Topography Formation During Texturization of Hard Metal Cutting Tools
ABSTRACT: The objective of this paper is to analyze the influence of specific laser system parameters on the microstructure of the ring formation process on the hard metal tool's surface. The parameters analyzed were: working distance, incident beam power and tool surface treatment, flank and rake. The microstructures were analyzed with regard to its diamete
J. Aerosp. Technol. Manag.. Publicado em: 2015-03
-
3. Phase transformations in an AISI 410S stainless steel observed in directional and laser-induced cooling regimes
The applications of the chromium ferritic stainless steel AISI 410S have been considerably increased in the last years in many technical fields as chemical industries and oil or gas transportation. However, the phase transformation temperatures are, currently, unknown for this alloy. The aim of this work is to determine the alpha to gamma transformation temp
Materials Research. Publicado em: 31/01/2012
-
4. Laser self-Raman dobrado intracavidade de alta potência CW operante na região amarela do espectro eletromagnético de aplicações oftalmológicas / High power intracavity doubled CW self-Raman laser operating in the yellow range of electromagnetic spectra of ophthalmological applications
Este trabalho tem por objetivo o desenvolvimento e otimização de uma cavidade laser self-Raman de aplicações oftalmológicas. A cavidade laser é do tipo estado sólido bombeada longitudinalmente por um diodo laser infravermelho. A cavidade é dita self-Raman pois um cristal Raman intracavidade faz o papel de meio ativo e deslocador Raman. Esse tipo de c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/08/2011
-
5. Desenvolvimento de lasers no azul, a partir da geração de segundo harmônico de um laser de Nd:YAG operando em 946 nm / DEVELOPMENT OF BLUE LASERS, FROM SECOND HARMONIC GENERATION USING A Nd:YAG LASER EMITTING AT 946 nm
Lasers emitindo no azul vêm sendo largamente utilizado em diversas aplicações como por exemplo, blu-ray, displays, e podem representar uma excelente fonte de bombeio para o meio ativo Ti:safira. Neste trabalho utilizamos um cristal de Nd:YAG, com diffusion bonded end-caps e um bombeamento com diodo semicondutor no comprimento de onda de 803,2 nm, dessinto
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/10/2010
-
6. Desenvolvimento de um laser de Nd:YLF bombeado por diodo laser e duplicado em frequencia para 657 nm / Development of a diode pumped Nd:YLF laser, frency doubled to 657 nm
Atomic clocks are used today in a number of scientific and technological applications, ranging from tests of relativity, or variations of fundamental constants, to the use in navigation and telecommunication. The next generation of such high precision devices will be based on optical transitions of suitable laser cooled and trapped atoms. In this work we des
Publicado em: 2009
-
7. Caracterizações estruturais e espectroscópicas de cerâmicas ferroelétricas de PLZT dopadas com íons de terras raras trivalentes / Structural and spectroscopy characterization of rare-earth doped PLZT ferroelectric ceramics
Recentemente, grande interesse tem sido demonstrado por cerâmicas transparentes dopadas com íons terras raras trivalentes, como meios ativos para lasers na região espectral do infravermelho próximo. Em particular, cerâmicas dopadas com altas concentrações de Nd3+ e Yb3+ são muito estudadas pela possibilidade de gerar emissão laser de alta potência
Publicado em: 2009
-
8. Methodology to detect the presence of recyled PET in PET food package / Metodologia para detectar a presença do PET reciclado em embalagens PET para alimentos
Recently, Brazil recorded mechanical recycling of the poly (ethylene terepththalate), PET, the highest in the world, corresponding to about 53 wt %. This success in the recycling industry is due to the wide range of its applications, from textiles to packaging for the food industry. The recycled food-grade packaging could be mixed with virgin resin and repro
Publicado em: 2009
-
9. CRYSTALLINE FLUORIDE FIBER LASER AND CHARACTERIZATION OF RARE EARTH DOPED FIBERS / Laser de fibra monocristalina de fluoretos e caracterização de fibras dopadas com terras raras
Diode pumped solid state lasers have supplied a large part of the search for high power lasers, with good beam quality, in addition, these lasers are useful for generation of visible laser radiation. Fiber lasers have the capacity to reach these high powers with a good beam quality, due to its special design which confines the radiation through long fiber le
Publicado em: 2008
-
10. Crescimento de fibras de LiYF4 dopadas com Nd3+ e Er3+ para aplicações em lasers de estado sólido / SINGLE FIBER CRYSTAL GROWTH OF Nd3+ AND Er3+- DOPED LiYF4 FOR SOLID STATE LASER APPLICATIONS
In the present work, we studied the growth of single crystal fibers of LiYF4 (YLF) doped with Er3+ or Nd3+ by the resistive micro-pulling-down (-PD) tecnhique. A new method for crucible preparation was developed to improve the growth process. The use of better-built crucibles allows their use in more than one experiment, increasing the process reproducibilit
Publicado em: 2008
-
11. Desenvolvimento de pentes de frequencias opticas para metrologia e espectroscopia de precisão / Development of optical frequency combs for precision metrology and spectroscopy
No final da década de 90, pentes de freqüências ópticas baseados em lasers de Ti:safira de modos travados tornaram-se uma importante ferramenta na área de metrologia. Eles têm sido usados, por exemplo, em medidas diretas de freqüências de várias centenas de THz e em relógios atômicos ópticos. Para a implementação de dois sistemas de pentes de f
Publicado em: 2007
-
12. "Investigação de Lasers de fluoreto dopados com Túlio e bombeados por diodo-Laser" / INVESTIGATION OF DIODE-LASER PUMPED THULIUM-DOPED FLUORIDE LASERS
Lasers sintonizáveis ao redor de 2,3 μm são interessantes para várias áreas, como detecção de gases, sensoriamento remoto e aplicações médicas. O túlio é o principal sistema entre os lasers de terras-raras com essa emissão e pode ser bombeado diretamente ou por meio de um sensibilizador como o itérbio. Neste trabalho, apresenta-se a obtenç
Publicado em: 2006