Crescimento de fibras de LiYF4 dopadas com Nd3+ e Er3+ para aplicações em lasers de estado sólido / SINGLE FIBER CRYSTAL GROWTH OF Nd3+ AND Er3+- DOPED LiYF4 FOR SOLID STATE LASER APPLICATIONS
AUTOR(ES)
Fernando Rodrigues da Silva
DATA DE PUBLICAÇÃO
2008
RESUMO
In the present work, we studied the growth of single crystal fibers of LiYF4 (YLF) doped with Er3+ or Nd3+ by the resistive micro-pulling-down (-PD) tecnhique. A new method for crucible preparation was developed to improve the growth process. The use of better-built crucibles allows their use in more than one experiment, increasing the process reproducibility. The growth chamber was also modified to achieve vacuum of approximately 10-7 torr. The previous thermal treatment under high vacuum before charge melting eliminate the initial transient reported in previous works of YLF doped fibers growth. Single crystal fibers of YLF:Nd (0.5, 1 e 1.5 mol%) and YLF:Er (1, 10 and 20 mol %), with 0.7 mm diameters and up to 120mm of length were grown. Mechanical problems in the micro-PD system equipment made difficult the control of the solid-liquid interface, and several corrections on the experimental parameters were necessary during the growth process, resulting in defects formation, mainly on the fibers surface. In the experimental conditions of this work, the use of a static atmosphere showed not appropriate for elimination of spurious contamination from ambient atmosphere. The Nd:YLF (1.5mol%) fiber demonstrated a gain higher that the losses, demonstrating the viability for laser action.
ASSUNTO(S)
fibras micro-pulling down micro-pulling down fibras ylf ylf
Documentos Relacionados
- ESTUDOS DOS PROCESSOS DE TRANSFERÊNCIA DE ENERGIA DOS ÍONS DE Er3+ E Ho3+ PARA OS ÍONS DE Nd3+, Tb3+ E Eu3+ NO CRISTAL DE LiYF4 E NO VIDRO ZBLAN PARA A OTIMIZAÇÃO DE MEIOS LASER ATIVOS QUE OPERAM NA REGIÃO DE 3 µm
- Caracterização espectroscópica de possíveis meios ativos para lasers de Nd3+ e Tm3+
- CRYSTALLINE FLUORIDE FIBER LASER AND CHARACTERIZATION OF RARE EARTH DOPED FIBERS
- Caracterização do LiNbO3:Er+3 como meio ativo para lasers de estado sólido através dos espectros de absorção/emissão polarizada e medida dos tempos de vida de luminescência.
- Lasers de frequência única de Nd:YIF e Nd:YVO4 na região do vermelho