Landfills
Mostrando 13-24 de 116 artigos, teses e dissertações.
-
13. Evaluation of the self-cemeting effect of Construction and Demotion Waste (CDW) on mechanical performance over time for pavement support layers purpose
Resumo O problema relacionado a geração de resíduos de construção civil (CDW) está diretamente associado à sua elevada geração e disposição irregular, sobretudo quando tais resíduos são dispostos em aterros sanitários. Desta forma, torna-se cada vez mais importante o incentivo do reaproveitamento deste material, sobretudo em obras de grande con
Ambient. constr.. Publicado em: 2019-04
-
14. Coupled numerical simulation of a tailings deposit by FEM
Abstract Researchers have found that a valuable alternative for predicting the mechanical behavior of landfill construction is numerical simulation based on the finite element method. The results of such a numerical simulation for a sandy tailings deposit from the iron mining coupling flow and deformation are presented herein. This study investigates the inf
REM, Int. Eng. J.. Publicado em: 2019-03
-
15. Workers’ perception of hazards on recycling sorting facilities in São Paulo, Brazil
Resumo O artigo discute pontos de vista, percepções, experiências, conhecimentos e comportamentos relacionados aos riscos ocupacionais entre os trabalhadores de reciclagem. Coleta de dados envolveu observação de campo e dois grupos focais em cada unidade. Narrativas foram gravadas, transcritas e analisadas por temas. Resultados são apresentados de acor
Ciênc. saúde coletiva. Publicado em: 2019-03
-
16. Utilization of gypsum from construction and demolition waste in Portland cement mortar
Abstract Civil construction generates the largest amount of construction and demolition waste (CDW), most of which is not reused and is discarded as inert waste in landfills. The purpose of this study was to evaluate the feasibility of reusing gypsum recovered from CDW in the preparation of mortar. This material was examined to determine its specific mass, m
Cerâmica. Publicado em: 2019-01
-
17. Study on Effect of EAFD Particulate Reinforcement in AA7075 Aluminum Matrix Composites
Eletric arc furnace dust is dangerous solid waste that is generated in steel manufacturing processes. The utilization of the dust from these industries avoids disposing it into industrial waste landfills and saves costs. In this study, an attempt has been made to fabricate aluminum matrix composites reinforced with EAFD particulate, throught the conventional
Mat. Res.. Publicado em: 13/09/2018
-
18. ZEÓLITA 4A PARA PURIFICAÇÃO DO GÁS DE ATERRO SANITÁRIO
The anaerobic decomposition in landfills produces a gas mixture known as landfill biogas. This biogas consists mainly of CH4 and CO2. The CO2 removal can be carried out by means of adsorption. In order to promote CO2 removal, zeolite type 4A was used as solid adsorbent. The synthesized zeolite was characterized by scanning electron microscopy and X-ray diffr
Quím. Nova. Publicado em: 2018-01
-
19. Effects of the silica nanoparticles (NPSiO2) on the stabilization and transport of hazardous nanoparticle suspensions into landfill soil columns
Abstract This study evaluates the stability and transport behaviors of hazardous nanoparticles into soil landfills using experimental procedures to simulate the effects of natural silica nanoparticle suspensions during their percolation into the soil layers of municipal waste landfills. For this, we prepared stabilized suspensions of nanoparticle oxides cont
REM, Int. Eng. J.. Publicado em: 2017-09
-
20. Cellulose Nanostructures Obtained from Waste Paper Industry: A Comparison of Acid and Mechanical Isolation Methods
The paper industry primary waste is usually deposited in landfills or incinerated. This material has a high content of lignocellulosic components, which could be converted to cellulose nanostructures (CNS). This study aimed to compare compositional (Fourier transform infrared spectroscopy), thermal (thermogravimetric analysis), morphological (scanning electr
Mat. Res.. Publicado em: 29/06/2017
-
21. Thermal resistance and conductivity of recycled construction and demolition waste (RCDW) concrete blocks
Abstract In Brazil, studies to reuse construction and demolition waste are a special issue because a large amount of this material has been delivered to the public landfills and in illegal places. Some researchers have suggested reusing this material in building elements, such as bricks or blocks. It is possible to find a lot of researches in physical/mechan
REM, Int. Eng. J.. Publicado em: 2017-06
-
22. Gas permeability of bentonite barriers: development, construction and testing of a measurement system
Abstract This article proposes a testing device to quickly and reliably estimate the gas permeability of bentonite-based clay barriers used in landfill cover systems. The testing methodology is based on a transient gas flow regime that passes through the barrier, therefore not requiring the use of sophisticated equipment that aim to maintain constant differe
REM, Int. Eng. J.. Publicado em: 2016-12
-
23. Coir and Sisal Fibers as Fillers in the Production of Eucalyptus Medium Density Particleboards - MDP
The aim of this study was to evaluate the potential use of sisal and coir fibers in combination with Eucalyptus particles for the production of particleboard. The particleboards were produced in three layers. The first and third layers (face) were made with small Eucalyptus particles. The second layer (core) was made with big Eucalyptus particles in combinat
Mat. Res.. Publicado em: 20/10/2016
-
24. APPLICATION OF THERMAL PLASMA FOR INERTIZATION OF SLUDGE PRODUCED DURING TREATMENT OF LANDFILL LEACHATE
One of the outstanding issues of concern by governments and society in general relates to the final destination of solid waste, which can bring severe impacts on social, political, economic and environmental dimensions. The sustainable development of enterprises and industries goes for the care of the planet, thus ensuring the quality of life for future gene
Quím. Nova. Publicado em: 2016-09