Laminated Materials
Mostrando 1-12 de 38 artigos, teses e dissertações.
-
1. STUDYING THE GRAMMAGE IN LVL PANELS GLUED WITH CASTOR OIL-BASED POLYURETHANE ADHESIVE: A POSSIBLE ALTERNATIVE TO FORMALDEHYDE RELEASING ADHESIVES.
ABSTRACT Efforts have been done in order to decrease the human dependence on petroleum materials. This idea can be applied for wood adhesives and wood products. This study proposes to evaluate laminated veneer lumber (LVL) panels of Hevea brasiliensis produced with castor oil-based polyurethane and resorcinol formaldehyde in different grammages. Six rubber t
CERNE. Publicado em: 2020-03
-
2. Bamboo particleboards: recent developments
RESUMO Devido à grande variação dimensional do bambu, a produção de materiais como compensados e laminados produz grande quantidade de resíduos. A produção de painéis particulados poderia ser utilizada para superar este problema e tornar-se uma solução viável na reutilização dos resíduos gerados como matéria-prima para produtos de alto valor
Pesqui. Agropecu. Trop.. Publicado em: 15/08/2019
-
3. DISPLACEMENT MEASUREMENT IN SAWN WOOD AND WOOD PANEL BEAMS USING PARTICLE IMAGE VELOCIMETRY
ABSTRACT Throughout their useful life structures demand monitoring to verify their conditions of use. Thus, the need arises to seek methodologies capable to evaluate displacements and deformations in structural components of buildings. The objective of this research was to evaluate the use of the particle image velocimetry (PIV) technique to analyze test spe
CERNE. Publicado em: 20/05/2019
-
4. Vibration analysis of laminated functionally graded shallow shells with clamped cutout of the complex form by the Ritz method and the R-functions theory
Abstract The R-functions theory and Ritz approach are applied for analysis of free vibrations of laminated functionally graded shallow shells with different types of curvatures and complex planforms. Shallow shells are considered as sandwich shells of different types: a) face sheets of the shallow shells are made of a functionally graded material (FGM) and t
Lat. Am. j. solids struct.. Publicado em: 18/02/2019
-
5. Determinación de la tenacidad a la fractura J en laminados fibra-metal del tipo CARALL con láminas de aluminio 6061 y 1050
ABSTRACT Determination of fracture toughness in hybrid composites, fiber-metal laminates, FML (Fiber Metal Laminates) is very important to perform an analysis of structural integrity to estimate damage tolerance and residual strength of the material against the propagation of a crack This evaluation should be done in both naval and aircraft structures using
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Nondestructive characterization of epoxy matrix composites reinforced with Luffa lignocellulosic fibers
ABSTRACT Luffa Cylindrica is a tropical plant from the Cucurbitaceae family, whose fruit becomes very fibrous when fully ripened. The lignocellulosic sponges of Luffa can be suitable for use as reinforcement of epoxy matrix composites, because they have a morphology with spatial 3-D arrangement as well as are eco-friendly materials (biodegradable, and high a
Matéria (Rio J.). Publicado em: 20/07/2017
-
7. Evaluation of Tensile Strength of a Eucalyptus grandis and Eucalyptus urophyla Hybrid in Wood Beams Bonded Together by Means of Finger Joints and Polyurethane-Based Glue
Created in the 1940s, the splice finger-joint type for wood has now been more used to compose structural materials wood base as Glued Laminated Timber (Glulam) and Cross Laminated Timber (CLT). The main advantage of this amendment is to provide a simple and economical way to join timber parts on segments. This study evaluated by means of tensile tests the ca
Mat. Res.. Publicado em: 22/09/2016
-
8. Simulation of Stress Concentration Problems in Laminated Plates by Quasi-Trefftz Finite Element Models
Abstract Hybrid quasi-Trefftz finite elements have been applied with success to the analysis of laminated plates. Two independent fields are approximated by linearly independent, hierarchical polynomials: the stress basis in the domain, adapted from Papkovitch-Neuber solution of Navier equations, and the displacement basis, defined on element surface. The st
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
9. Reinforced Transparencies for Aerospace Application – Case Description
ABSTRACT This paper describes the polycarbonate acrylic laminated development that can be applied in aeronautics and aerospace transparencies. The case studied is a laminated double-curved transparency (bubble form) used in an observation side window of a military aircraft. Side windows need strength and specific characteristics, similar to windshields, allo
J. Aerosp. Technol. Manag.. Publicado em: 2016-03
-
10. Recycling assessment of multilayer flexible packaging films using design of experiments
AbstractThe viability of recycling post-industrial packaging waste, compounded from multilayer laminated PET-PE films, for production of polymer blends with good physico-mechanical performance is analyzed. Initially, several PET-PE model-blends were prepared from fresh polymers and were compounded with different formulations, based on design of experiments (
Polímeros. Publicado em: 2015-08
-
11. Evaluation of a nanostructured microwave absorbent coating applied to a glass fiber/polyphenylene sulfide laminated composite
The rapid coating of composites with absorbing paints yields materials that can absorb microwave radiation and still have approximately the same specific mass of the original composites. The use of paints with specific electromagnetic properties together with carbon- nanotube-based materials allows the production of structural materials of interest to the ae
Mat. Res.. Publicado em: 18/02/2014
-
12. A study on acoustic behavior of poroelastic media bonded between laminated composite panels
A study on the acoustic behavior of double-walled panels, with sandwiched layer of porous materials is presented within Classical Laminated Plate Theory (CLPT) for laminated composite panels. For this purpose, equations of wave propagation are firstly extracted based on Biot's theory for porous materials, then the transmission loss (TL) of the structure is e
Lat. Am. j. solids struct.. Publicado em: 2014