Kinetic Model
Mostrando 1-12 de 1262 artigos, teses e dissertações.
-
1. Evaluation of the Properties of LaNiO3 Material Prepared by the Modified Proteic Method for Adsorption of Environmental Contaminants
LaNiO3 material was synthesized by modified proteic method, calcined at 900 °C/2 h in air atmosphere and was applied to remove environmental contaminants. LaNiO3 phase with a perovskite structure was formed in the calcined material, which has a surface area of 22 m2 g-1 and is formed by fine particles agglomerated, with pH of the zero charge point of 7.44.
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. ADSORPTION OF ATRAZINE IN RICE HUSK BIOCHARS: A PHENOMENOLOGICAL MODEL APPLIED TO EQUILIBRIUM AND KINETIC STUDIES
ABSTRACT Atrazine is an herbicide used to remove weeds in agricultural crops; however, because it is considered toxic, options for removing it from the environment are needed. Adsorption on biochar is an efficient technique for removing organic contaminants. In this study, the atrazine adsorption capacities of two biochars (BCA400 and BCA700) produced from r
Engenharia Agrícola. Publicado em: 2022
-
3. Steel desulfurization on RH degasser: physical and mathematical modeling
Abstract Due to the high-quality steel demand, especially for ultra-low Sulfur steel, RH desulfurization has been practiced. Based on this, mathematical and physical modeling have been applied to study steel desulfurization by reagent addition in the RH degasser vacuum chamber. The main result of cold modeling, using water and oil emulating steel and slag, r
REM - International Engineering Journal. Publicado em: 2022
-
4. Kinetic study and thermodynamic equilibrium modeling of the Co(II) and Mn(II) bioadsorption using the Rhodococcus opacus strain
Abstract Microbial biomass is considered a renewable and environmentally friendly resource. Thus, the research conducted a kinetic study and thermodynamic equilibrium modeling of the cobalt (Co) and manganese (Mn) bioadsorption process using the Rhodococcus opacus (RO) strain as a biosorbent. The inactive biomass subjected to 0.1 M NaOH pretreatment was brou
REM - International Engineering Journal. Publicado em: 2022
-
5. Thermal, structural and optical properties of magnetic BiFeO3 micron-particles synthesized by coprecipitation method: heterogeneous photocatalysis study under white LED irradiation
Abstract Bismuth ferrite, BiFeO3 (BFO) prepared via a coprecipitation method, was used as an effective photocatalyst for the degradation of methylene blue (MB) using a white light-emitting diode (LED-50 W) lamp. The as-prepared material was characterized by TGA, XRD, SEM-EDX, FTIR, and UV-vis-DRS techniques. The effects of experimental key parameters such as
Cerâmica. Publicado em: 2022
-
6. Heterogeneous Fenton-like catalytic degradation of phenazine dye over CeO2 (CP-2) nanoscale powder
Abstract A heterogeneous Fenton-like process was explored for oxidation of phenazine dye using ceria polishing material (CP-2). XRD, SEM, FTIR, UV-vis DRS, and pHPZC techniques were applied to characterize the catalyst features. The performance of the heterogeneous Fenton-like process was investigated under various parameters (reaction time, pH, H2O2 concent
Cerâmica. Publicado em: 2022
-
7. Adhesion evaluation of the Rhodococcus opacus strain on an apatite surface
Abstract Adsorption of microorganisms and/or their different components onto a mineral surface would modify the surface characteristics of the mineral. Thus, this investigation evaluated the adsorption capacity of the Rhodococcus opacus strain onto an apatite surface. Zeta potential and contact angle measurements of the mineral showed dislocations of the val
REM, Int. Eng. J.. Publicado em: 2021-09
-
8. Utilization of the Corncob Agro-Industrial Residue as a Potential Adsorbent in the Biosorption of Bisphenol-A
The presence of plastic waste in water bodies has led to a growing concern due to the impact on human health. Among the most important plastic additive molecules is bisphenol-A (BPA). On the other hand, micro-pollutant removal processes that make use of agro-industrial waste have aroused the interest of researchers. This is because the accumulation of lignoc
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
9. PEACH PIT CHEMICALLY TREATED BIOMASS AS A BIOSORBENT FOR METFORMIN HYDROCHLORIDE REMOVAL: MODELING AND SORPTION MECHANISMS
ABSTRACT In this work, the potential of peach pit biosorption in the removal of the drug metformin hydrochloride from water is evaluated. Experiments are carried out in a closed batch system to evaluate the effect of the solution pH (2–10), temperature (25, 35 and 45 °C), stirring (100, 150 and 200 rpm) and chemical treatments. During the study, biosorben
Eng. Agríc.. Publicado em: 2021-04
-
10. Voltammetric Generation and Kinetic Stability of Nitro Anion Radical from Nitrofurazone in Ionic Liquids
The nitrofurazone (NF) electrochemical reduction has been studied by cyclic voltammetry (CV) and square wave voltammetry (SWV) in non-aqueous medium using three different ionic liquids (IL): BMImTf2N, BMImBF4 and BMMImTf2N, having a carbon fiber microelectrode as working electrode. In all of them, two reversible cathodic peaks were recorded for NF. Under hig
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
11. Yellow Mombin (Spondias mombin L.) Seeds from Agro-Industrial Waste as a Novel Adsorbent for Removal of Hexavalent Chromium from Aqueous Solutions
The objective of this study was to develop a low-cost and eco-friendly adsorbent from agro-industrial waste for the removal of hexavalent chromium in the aqueous medium. The adsorbent (BMC) produced from yellow mombin (Spondias mombin L.) seeds was characterized by the determination of the chemical composition, thermal analysis (thermogravimetric (TG) analys
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
12. Application of Nickel Ferrite Nanoparticles in Adsorption of Amoxicillin Antibiotic
According to the World Health Organization, amoxicillin (AMX) is the most widely consumed antibiotic in the world. Consequently, there is great interest in the development of new technologies that allow the removal of this type of contaminant, as exposure to antibiotic residues can cause a variety of adverse effects, such as toxicity and antimicrobial resist
J. Braz. Chem. Soc.. Publicado em: 2020-12