Intermetallics
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. COMPREENDENDO OS MECANISMOS DE CORROSÃO DE LIGAS DE AL-CU-LI: UMA INVESTIGAÇÃO ATRAVÉS DE TÉCNICAS ELETROQUÍMICAS GLOBAIS E LOCAIS
In this study, the corrosion mechanism of an Al-Cu-Li alloy manufactured by two different treatment routes (T3 and T851) was evaluated by immersion and electrochemical tests in solutions containing chloride ions (Cl-). For both alloys, the formation of cavities on the surface was associated with micrometer-sized intermetallics (IM’s), however, in addition
Química Nova. Publicado em: 2022
-
2. On the Global and Localised Corrosion Behaviour of the AA2524-T3 Aluminium Alloy Used as Aircraft Fuselage Skin
The aim of this work was to study the corrosion process of new aluminium alloy AA2524-T3 (Solution Heat Treated and Cold Worked), which is a promising substitute of the base line AA2024-T3 for aircrafts fabrication, by global and localised techniques in sodium chloride medium (0.05 mol L-1 NaCl). The open circuit potential results revealed a stochastic evolu
Mat. Res.. Publicado em: 14/01/2019
-
3. Efecto de la sustitución de V por Ti sobre las temperaturas de transformación de fase y el desajuste de red matriz/precipitado en la superaleación 76Fe-12Al-12V
ABSTRACT Fe-Al based alloys have a remarkable potential for high temperature structural applications, provided that the limitation of their low creep resistance is solved. Third element addition (Nb, Ti, Zr or Ta) has proven to per-form the task, at the expense of a low ductility. In previous works we have investigated ferritic alloys in the Fe-Al-V system w
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Study of Mechanical and Wear Behaviour of Hyper-Eutectic Al-Si Automotive Alloy Through Fe, Ni and Cr Addition
Effect of Fe, Ni and Cr addition on the wear behavior of hyper-eutectic Al-Si automotive alloy has been studied. Dry sliding wear tests have been conducted using pin-on-disc wear testing machine under normal loads of 20N and constant sliding speed of 0.64 ms-1. Influence of Fe addition to the base alloy increases the wear rate due to the formation of needle
Mat. Res.. Publicado em: 11/06/2018
-
5. Transient Unidirectional Solidification, Microstructure and Intermetallics in Sn-Ni Alloys
The present research work examines the microstructural arrangements formed during the transient solidification of eutectic Sn-0.2wt.%Ni and hypereutectic Sn-0.5wt.%Ni alloys. Also, it examines their respective correlations with solidification thermal parameters: eutectic growth rate (VE) and eutectic cooling rate (ṪE); length scales of matrix and eutectic
Mat. Res.. Publicado em: 12/04/2018
-
6. Microstructural evolution and mechanical properties of Sn-Bi-Cu ternary eutectic alloy produced by directional solidification
Sn-36Bi-22Cu (wt.%) ternary eutectic alloy was prepared using vacuum melting furnace and casting furnace. The samples were directionally solidified upwards solidification rate varying from 8.3 to 166 µm/s and at a constant temperature gradient (4.2 K/mm) in a Bridgman-type directional solidification furnace. The composition analysis of the phases and the in
Mat. Res.. Publicado em: 05/02/2018
-
7. Production of nanograined intermetallics using high-pressure torsion
Formation of intermetallics is generally feasible at high temperatures when the lattice diffusion is fast enough to form the ordered phases. This study shows that nanograined intermetallics are formed at a low temperature as 573 K in Al- 25 mol% Ni, Al- 50 mol.% Ni and Al- 50 mol% Ti powder mixtures through powder consolidation using high-pressure torsion (H
Mat. Res.. Publicado em: 23/04/2013
-
8. Estudo da corrosão e corrosão-fadiga em ligas de Al e Al - Li de alta resistência para aplicação aeronáutica / Study behaviour of corrosion and corrosion fatigue in high strength Al and Al - Li alloys for aeronautic application
The aircraft industry is constantly looking for improved materials which offer benefits in terms of performance, weight and cost savings. Corrosion and fatigue of aluminium alloys are major issues in the service life assessment of aircraft structures and in the management of aging air fleets. The aim of this study was to evaluate the corrosion and corrosion
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/09/2012
-
9. Estudo do efeito magnetocalórico em sistemas magnéticos com terras raras / Study of the magnetocarolic effect in magnetic systems with rare earths
O efeito magnetocalórico, base da refrigeração magnética, é caracterizado por duas quantidades: a variação isotérmica da entropia (ΔST) e a variação adiabática da temperatura (ΔTS); que são obtidas sob variações na intensidade de um campo magnético aplicado. Em sistemas que apresentam anisotropia magnética, pode‐se definir o e
Publicado em: 2010
-
10. Estudo comparativo da estampabilidade da liga de aluminio AA1050 partindo de placas obtidas por vazamento direto e bobinas obtidas por vazamento contínuo. / Comparative study of the deep drawing alloy AA1050 from plates obtained by direct casting and coils obtained by continuos casting.
Stampability of aluminum alloys is a subject of interest to several industrial sectors because they are largely used in the fabrication of several parts and components. The choice is based upon the stampability and the relative manufacturing capability in relation to other aluminum alloys that contain larger amounts of alloying elements and, consequently, hi
Publicado em: 2010
-
11. Determinação dos coeficientes de expansão térmica das fases Ta5Si3 e Cr5Si3 e a investigação da formação da fase (Hf,Ti)5Si3 por difratometria de raios X de alta resolução / Determination of the thermal expansion coefficients for the Ta5Si3 and Cr5Si3 phases and the investigation of (Hf, Ti)5Si3 phase formation by high resolution X-ray diffraction
The transition metal silicides have been investigated aiming high temperature applications. The thermal expansion is one of main properties for applications. The aim of this work was the evaluation of the thermal expansion coefficients for αTa5Si3 and Cr5Si3 phases and the investigation of (Hf, Ti)5Si3 phase formation. The Ta-Si and Cr-Si alloys were pr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/10/2009
-
12. Síntese de intermetálicos de Ni3AlE Fe3AI por moagem de alta energia
The objective of this assignment is the synthesis of Ni3Al and Fe3Al, though the high energy milling. Intermetallic compounds are ordinate alloys, usually consisted of two elements characterized by the order of long reach they exhibit, that is caused by the strong connection among the different atoms when compared to the same atoms in the system. Some of the
Publicado em: 2008