Industrial Waste Analysis
Mostrando 1-12 de 85 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. Effects of the addition of graphene on the compressive strength of geopolymeric mortar developed from k-feldspar mining waste
Abstract Contemporary organizations are showing a growing interest in the reuse of solid waste from industrial processes with the intention of reducing environmental impacts and reducing costs. The mining activity is one of the main waste generators in Brazil. In parallel, geopolymeric materials have been gaining prominence in studies that make it a possible
REM, Int. Eng. J.. Publicado em: 2021-09
-
3. Agro-Industrial Waste Valorization: Transformation of Starch from Mango Kernel into Biocompatible, Thermoresponsive and High Swelling Nanogels
Mango industry processing disposes 40-60% of this fruit as residues, such as peels and kernels. The exploration of bioproducts from these industrial rejects can reduce environmental impact besides of producing high value-added materials. In this scenario, carboxymethyl starch nanoparticles were produced from mango (Mangifera indica L.) kernel starch. These n
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
4. Utilization of the Corncob Agro-Industrial Residue as a Potential Adsorbent in the Biosorption of Bisphenol-A
The presence of plastic waste in water bodies has led to a growing concern due to the impact on human health. Among the most important plastic additive molecules is bisphenol-A (BPA). On the other hand, micro-pollutant removal processes that make use of agro-industrial waste have aroused the interest of researchers. This is because the accumulation of lignoc
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
5. Evaluation of the use of silica-alumina refractory waste as a supplementary cementitious material
Abstract The use of supplementary cementitious materials (SMCs) is one of the three essential factors for the sustainability of the cement industry. To reduce CO2 emissions, several studies have introduced new methods for the utilization of industrial wastes such as the addition into cementitious materials. The objectives of this study were to chemically and
Cerâmica. Publicado em: 2021-06
-
6. OPTIMIZATION OF BREWING WASTE’S (TRUB) PHENOLIC COMPOUNDS EXTRACTION BY ULTRASOUND ASSISTED USING RESPONSE SURFACE METHODOLOGY
The brewing waste, also known as trub, is an abundant by-product of the brewing industry. Such material presents high levels of phenolic compounds, which promote antioxidant, antimicrobial and antifungal effects, turning the trub economically attractive. In this study, the trub’s phenolic compounds were extracted by ultrasound-assisted extraction technolog
Quím. Nova. Publicado em: 2021-04
-
7. Yellow Mombin (Spondias mombin L.) Seeds from Agro-Industrial Waste as a Novel Adsorbent for Removal of Hexavalent Chromium from Aqueous Solutions
The objective of this study was to develop a low-cost and eco-friendly adsorbent from agro-industrial waste for the removal of hexavalent chromium in the aqueous medium. The adsorbent (BMC) produced from yellow mombin (Spondias mombin L.) seeds was characterized by the determination of the chemical composition, thermal analysis (thermogravimetric (TG) analys
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
8. CELLULOSE NANOFIBERS FROM CASSAVA AGRO-INDUSTRIAL WASTE AS REINFORCEMENT IN PVA FILMS
Cellulose nanofibers (CNF) have been applied in composite systems due to the abundance of raw material, excellent mechanical and thermal properties. In this work, CNF was prepared from agroindustrial waste and used in specified amounts in polyvinyl alcohol (PVA) composites. The FTIR spectra of CNF, chemically purified cellulose (CPC) and Cassava Agro-industr
Quím. Nova. Publicado em: 2020-06
-
9. Characterization of hydrolysates of collagen from mechanically separated chicken meat residue
Abstract Obtaining collagen and hydrolysates from mechanically separated chicken meat residue is an excellent way to add value to this waste. The aims of this study were to obtain collagen hydrolysates from chicken MSM residue using Alcalase® and Flavourzyme® enzymes, as well characterizing the functional, structural and thermal stability properties. The h
Food Sci. Technol. Publicado em: 2020-06
-
10. Bioactive compounds and value-added applications of cupuassu (Theobroma grandiflorum Schum.) agroindustrial by-product
Abstract Cupuassu is a fruitful species from the Amazon basin with great economical potential, due to the multiple uses of its pulp and seeds in the food and cosmetic industries. This fruit generates large amounts of solid waste, which, despite of its high content of bioactive compounds, is discarded in the environment. Therefore, with the aim of reusing the
Food Sci. Technol. Publicado em: 2020-06
-
11. Avaliação dos impactos ambientais de um processo industrial utilizando como matéria-prima policarbonatos virgem e reciclado
RESUMO Os impactos ambientais gerados por processos produtivos é um assunto em crescente evidência no mundo organizacional, e a análise comparativa de processos vem sendo utilizada pelas empresas para verificar os impactos ambientais e suas principais fontes de emissões. A análise dos impactos de um processo produtivo, com dois contextos distintos para
Eng. Sanit. Ambient.. Publicado em: 20/12/2019
-
12. Síntese de pigmentos de níquel utilizando areia descartada de fundição como fonte de sílica
Resumo Sintetizaram-se pigmentos do sistema Zn2-xNixSiO4 variando a proporção molar de zinco e níquel, partindo da estrutura willemita (Zn2SiO4) à olivina (Ni2SiO4), usando areia descartada de fundição (ADF) e sílica comercial como fontes de SiO2. A ADF foi caracterizada por análise química e DRX. A síntese dos pigmentos seguiu rota cerâmica, com
Cerâmica. Publicado em: 14/11/2019