Indentation
Mostrando 1-12 de 139 artigos, teses e dissertações.
-
1. Effect of TiC Particles Concentration on Microstructure and Properties of Ni-TiC Composite Coatings
A kind of novel anti-wear Ni-TiC composite coatings was deposited successfully on 42CrMo steel by pulsed electrodeposition method with various TiC particles concentration. The effect of TiC concentration on morphologies and properties of Ni-TiC composite coatings were investigated and the optimum concentration of TiC particle was obtained. Results demonstrat
Mat. Res.. Publicado em: 20/01/2020
-
2. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Mechanical behavior of PVD coatings deposited on ADI
ABSTRACT In this work, the mechanical behavior of the coated ADI system is studied. For this purpose, single layer Ti and bilayer Ti/TiN and TiAl/TiAlN coatings, with different thicknesses, were deposited by the PVD technique of cathodic arc deposition on high strength ADI substrates using industrial and experimental devices. The characterization of the coat
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Influence of the Pre-Treatments and Process Temperature on the Adhesion of TiN Films Deposited by PBII&D Over Nitrided Austenitic Stainless Steel
In this work the influence of pre-treatment cleaning processes in the adhesion of TiN films deposited by the plasma based ion implantation and deposition (PBII&D) process over plasma nitrided AISI 316L stainless steel was investigated, varying the gas composition, the duration of the sputtering process and the temperature in the same deposition chamber. The
Mat. Res.. Publicado em: 28/10/2019
-
5. Experimental-numerical Technique to Evaluate the Thickness of TiN Thin Film
In this study, the numerical analysis of instrumented indentation testing was combined with the experimental procedure to evaluate the mechanical properties and thickness of a titanium nitride (TiN) film deposited on titanium substrate (Ti) by plasma processing. TiN film thickness is an important parameter for the surface treatment industry. In numerical ana
Mat. Res.. Publicado em: 09/09/2019
-
6. Influence of Directional Solidification on the Mechanical Properties of Cu-Al-Be-Nb-Ni Alloy
Copper-based polycrystalline shape memory alloys (SMAs) have limitations for many practical applications due to their low superelasticity and low ductility. In order to overcome this situation, in recent years, the production of copper-based SMAs by directional solidification process has attracted the interest of many researches. In this sense, the present w
Mat. Res.. Publicado em: 05/09/2019
-
7. Isthmocele: an overview of diagnosis and treatment
RESUMO A istmocele ou nicho uterino é representada por uma descontinuidade miometrial ou um defeito anecoico triangular na parede uterina anterior, com a base se comunicando com a cavidade uterina no local de uma cicatriz anterior de cesárea. O defeito pode ser classificado como pequeno ou grande, dependendo da espessura da parede miometrial deficiente. Em
Rev. Assoc. Med. Bras.. Publicado em: 03/06/2019
-
8. ESTABLISHMENT OF QUALITY CLASSES FOR HARDWOOD FLOORINGS BY SIMULATED USE
ABSTRACT Many wood species have been employed as floorings, however their performance can vary greatly according to the wood properties and the type of application. Mechanical tests can be performed for simulating the wood floorings in service, but there are no standards for sorting the materials according to their quality as flooring. In this study, the tes
CERNE. Publicado em: 20/05/2019
-
9. On the observation of extended microstructures and localized deformations in granular materials - A feature of excat quasi-convex energy envelope
Abstract In this paper a most promising scope of the exact quasiconvex energy envelope in modeling the granular materials with microstructures is presented. This study shows that it is possible to observe both the extended microstructures and localized deformations in granular materials using a variational model based on the mathematical relaxation theory. T
Lat. Am. j. solids struct.. Publicado em: 25/04/2019
-
10. Ultimate strength formulations for FPSO stiffened panels under combined compression and shear with initial imperfections and damage
Abstract Accidental collision of striking objects, such as a supply vessel, into the side panel of a FPSO highly influences its ultimate strength assessment. An empirical formula for predicting the ultimate strength of damaged stiffened panels under combined loading of shear and longitudinal compression is empirically derived in this work based on curve fitt
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
11. Pipeline Stress Analysis Through Stress Function Fittings
Abstract This work presents a hybrid experimental technique for stress analysis in pipes due to soil-pipe interaction. It was used a variation of Digital Speckle Pattern Interferometry (DSPI) combined with a small indentation setup for acquiring radial displacement points. Data collected are fitted under the Airy stress functions method for the determination
Lat. Am. j. solids struct.. Publicado em: 17/09/2018
-
12. Protección de acero para instrumentos quirúrgicos con recubrimientos duros en base carbono tipo DLC
ABSTRACT Martensitic stainless steels can be used in different applications such as surgical instruments where a good wear and corrosion resistance are required. Surface modification treatments such as nitriding improve the mechanical properties of these steels, however; they affect the corrosion resistance. For this reason, the DLC (Diamond Like Carbon) coa
Matéria (Rio J.). Publicado em: 19/07/2018