Hydrophilic Material
Mostrando 13-24 de 52 artigos, teses e dissertações.
-
13. SÍNTESE E CARACTERIZAÇÃO DE COMPÓSITOS ORGÂNICO-INORGÂNICOS MACROPOROSOS PARA O SENSORIAMENTO DE H2O2
Electrodes modified with poly(5-amino-1-naphthol)/Prussian blue (poly(5-NH2-1-NAP)/PB) hybrid films are able to electrochemically reduce H2O2 in medium containing an excess of Na+ cations. This is an important advantage for biosensing applications over electrodes in which only conventionally (electro) deposited Prussian blue is present. Consequently, the aim
Quím. Nova. Publicado em: 2015-02
-
14. Use of hydrophilic and hydrophobic polymers for the development of controlled release tizanidine matrix tablets
O objetivo do presente estudo foi desenvolver matriz de de tizanidina de liberação controlada. As formulações foram projetadas usando o método do componente, central com a ajuda de software Design expert(r), versão 7.0. Utilizou-se Avicel pH 101, no intervalo de 14-50%, como material de preenchimento, enquanto HPMC K4M e K100M, no intervalo de 25-55%,
Braz. J. Pharm. Sci.. Publicado em: 2014-12
-
15. Effect of saliva contamination on bond strength witha hydrophilic composite resin
OBJETIVO: avaliar a influência da contaminação por saliva na resistência de união de braquetes metálicos colados ao esmalte com um compósito resinoso hidrofílico. MÉTODOS: oitenta pré-molares foram divididos aleatoriamente em quatro grupos (n=20), de acordo com o material de colagem e a presença de contaminação - G1) colagem com Transbond XT na
Dental Press J. Orthod.. Publicado em: 2013-02
-
16. Desenvolvimento e validação de um método analítico por espectrofotometria UV para quantificação de carvedilol
This paper reports the development and validation of a new analytical method using UV spectrophotometry to quantify carvedilol (CRV) in hydrophilic matrices and raw material. This method was shown to be linear, accurate, precise, robust and to have adequate limits of quantification and detection (LQ and LD, respectively), allowing its use in the dissolution
Quím. Nova. Publicado em: 2013
-
17. Desenvolvimento e caracterização de dispositivo de PLLA/Trietil-Citrato associado à derme suína acelular para reparação de lesões cutâneas / Development and characterization of PLLA/Triethyl citrate device associated to acellular dermal matrix to repair cutanous wounds
One of the challenges of the Tissue Engineering is to promote a better functioning of organs and tissues damaged by diseases or traumas. With target for developing a biphasic device for future regeneration and dermal application in Tissue Engineering and Regenerative Medicine, fibroblasts from VERO cell line were cultivated on a porcine acellular dermal matr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/02/2012
-
18. Blood contamination effect on shear bond strength of an orthodontic hydrophilic resin
OBJECTIVE: The aim of this study was to assess the impact of blood contamination on shear bond strength (SBS) and bond failure pattern of metallic brackets bonded using a new hydrophilic resin. MATERIAL AND METHODS: Eighty human premolars were randomly allocated into 4 groups (n=20) according to the bonding material and contamination pattern. GI: brackets bo
Journal of Applied Oral Science. Publicado em: 2012-02
-
19. Adhesion and biocides inactivation of Salmonella on stainless steel and polyethylene
The adhesion of Salmonella (S.) strains to stainless steel and polyethylene and their inactivation by biocides used in food industry was investigated. Coupons of stainless steel and polyethylene were immersed in bacterial suspensions of S. Enteritidis, S. Typhimurium, and S. Bredeney during 15, 30, and 60 minutes, and submitted to different concentrations of
Brazilian Journal of Microbiology. Publicado em: 2010-12
-
20. Desenvolvimento e estudo físico-químico de compósitos de nanotubos de carbono / Physical chemical study and development of carbon nanotubes composites
This thesis presents for the first time nitrogen-cup-stacked carbon nanotubes with hydrophilic and semiconducting properties synthesized by alcohol precursor. The hybrid carbon fiber/carbon nanotubes composite have three-dimensional geometry and nanostructure. The material was prepared via fixed-bed chemical vapor deposition reactor. In this process nitrogen
Publicado em: 2010
-
21. Behavior of binary lipid in the production of microparticles by spray chilling and its influence on the hydrophilic core release / Comportamento de misturas binarias lipidicas na produção de microparticulas por spray chilling e sua influencia na liberação de recheio hidrofilico
The ease to obtain lipid microparticles and the possibility of their production in an industrial scale increase the interest of the food market to process this kind of particles. However, these microparticles present disadvantages with regard to low encapsulation and the expulsion of the core material core during storage. Thus, the purpose of this work was t
Publicado em: 2010
-
22. Effect of an additional hydrophilic versus hydrophobic coat on the quality of dentinal sealing provided by two-step etchand-rinse adhesives
OBJECTIVE: To test the hypothesis that the quality of the dentinal sealing provided by two-step etch-and-rinse adhesives cannot be altered by the addition of an extra layer of the respective adhesive or the application of a more hydrophobic, non-solvated resin. MATERIAL AND METHODS: full-crown preparations were acid-etched with phosphoric acid for 15 s and b
Journal of Applied Oral Science. Publicado em: 2009-06
-
23. Synthesis and characterization of thermo-responsive particles of poly(hydroxybutirate-co-hydroxyvalerate)-b-poly(N-isopropylacrylamide)
A new kind of thermo-responsive particles were prepared by the self-assembly technique, comprising poly(hydroxyvalerate-co-hydroxybutirate)-b-poly(N-isopropylacrylamide)/ (PHBHV-b-PNIPAAm) block copolymers. The hydrophilic part PNIPAAm was synthesized by Reversible Addition- Fragmentation chain Transfer (RAFT) polymerization. Particles with core-shell morpho
Brazilian Journal of Physics. Publicado em: 2009-04
-
24. Desenvolvimento de uma formulação cólon específica visando o tratamento da colite ulcerativa
Micro and nanoparticulate systems as drug delivery carriers have achieved successful therapeutic use by enhancing efficacy and reducing toxicity of potent drugs. The improvement of pharmaceutical grade polymers has allowed the development of such therapeutic systems. Microencapsulation is a process in which very thin coatings of inert natural or synthetic po
Publicado em: 2009