Hydrodynamic Behavior
Mostrando 1-12 de 88 artigos, teses e dissertações.
-
1. Chitosan-Sodium Alginate Polyelectrolyte Complex Coating Pluronic® F127 Nanoparticles Loaded with Citronella Essential Oil
Pluronic® F127 nanoparticles were loaded with citronella essential oil (CEO) and then covered with chitosan-sodium alginate polyelectrolyte complex (PEC). The system was characterized according to size, zeta potential and stability over time. Dynamic light scattering (DLS) in different proportions of water/ethanol as a dispersive medium was important in con
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
2. Comportamento hidrodinâmico de sistemas alagados construídos de escoamento horizontal subsuperficial de diferentes proporções geométricas e tempos de operação
RESUMO No presente trabalho, teve-se por objetivo avaliar a influência da proporção geométrica e o tempo de operação na hidrodinâmica do sistema. Para isso, três sistemas alagados construídos de escoamento horizontal subsuperficial (SACs-EHSS) de diferentes razões comprimento:largura (L/B) foram caracterizados no que se refere ao comportamento hidr
Eng. Sanit. Ambient.. Publicado em: 25/04/2019
-
3. IMPACT OF THE HYDRAULIC LOADING RATE ON THE HYDRODYNAMIC CHARACTERISTICS OF AN ANAEROBIC FIXED BED REACTOR TREATING CATTLE SLAUGHTERHOUSE WASTEWATER
ABSTRACT The hydrodynamic behavior of an anaerobic fixed bed reactor (AFBR) was evaluated in the treatment of cattle slaughterhouse wastewater. The AFBR was operated at hydraulic retention time (HRT) of 14, 11 and 8 h. Stimulus-response assays were carried out with Eosin Y and the experimental data were adjusted to the single-parameter theoretical models of
Eng. Agríc.. Publicado em: 2018-06
-
4. Mathematical modeling of manganese adsorption onto bone char in a continuous fixed bed column incorporating backmixing and shriking core approaches
Abstract The present study investigated the dynamics of manganese adsorption onto bone char in a continuous fixed bed column using a mathematical model that incorporates: (i) the backmixing model to describe the fluid flow through the bed and (ii) the shrinking core model to describe the kinetic and mass transfer phenomena within spherical adsorbent particle
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
5. Investigation of Wedge Water-Entry Under Symmetric Impact Loads by Experimental Tests
Abstract One of the main challenges for engineers in designing high-speed crafts is the evaluation of hydrodynamic loads during the impact of hull to wave’s surface. This paper presents an experimental investigation on the pressure distribution on three wedge-sections with 15°, 20° and 30° deadrise during water-entry. Assessment of pressure distribution
Lat. Am. j. solids struct.. Publicado em: 2017-06
-
6. Studies of the Colloidal Properties of Superparamagnetic Iron Oxide Nanoparticles Functionalized with Platinum Complexes in Aqueous and PBS Buffer Media
This work has focused on the synthesis of three nanosystems composed of superparamagnetic iron oxide nanoparticles (SPIONs) coated either with a carboxylate platinum(IV) complex (PD = cis,cis,trans-[Pt(NH3)2Cl2(HOOCCH2CH2COO)(OH)]) or with platinum(II) complex functionalized dextrans (DexPt1 = [Pt(Dex-NH2)Cl3] and DexPt2 = [Pt(Dex-NH2)(NH3)2(H2O)]). All nano
J. Braz. Chem. Soc.. Publicado em: 2017-05
-
7. HYDRAULIC CONDUCTIVITY VARIABILITY IN HORIZONTAL SUBSURFACE FLOW CONSTRUCTED WETLANDS
ABSTRACT Many modifications in hydrodynamic conditions occur inside the bed of a horizontal subsurface flow constructed wetland (HSSF–CW) in operation. Studies on hydraulic conductivity measurement techniques in HSSF–CW are imperative since the monitoring of flow conditions is essential for understanding and controlling its clogging. This study aimed to
Eng. Agríc.. Publicado em: 2017-04
-
8. Verificação da solução das equações de Saint-Venant com base no método difusivo de lax para propagação de vazões em canais naturais
ABSTRACT Hydrodynamic models, based on the Saint-Venant equations, represent the transient flow in water systems, and simulate flow routing over time and space. Several numerical solutions have been applied to these expressions, but often differences are found in results among distinct procedures, considering that all numerical approaches have limitations. N
RBRH. Publicado em: 20/02/2017
-
9. Experimental validation of a bearing wear model using the directional response of the rotor-bearing system
ABSTRACT The present work gives continuity in the analysis of the wear influence on cylindrical hydrodynamic bearings by presenting an experimental validation of the wear model previously proposed by the authors. This validation is carried on using the frequency response of the rotor-bearings system in directional coordinates. For this purpose, a test rig wa
An. Acad. Bras. Ciênc.. Publicado em: 10/11/2016
-
10. Geometry and head loss in Venturi injectors through computational fluid dynamics
ABSTRACT To determine the influence of geometry on the hydrodynamic behavior of Venturi injectors, using computational fluid dynamics techniques, we studied, at the Universitat Politècnica de València, Valencia, Spain, the geometric parameters that exert the most influence on head losses: the relationship between throat diameter and nozzle (β), nozzle ang
Eng. Agríc.. Publicado em: 2016-06
-
11. Study of Thermal Degradation of PLGA, PLGA Nanospheres and PLGA/Maghemite Superparamagnetic Nanospheres
Poly(glycolide-co-lactide) (PLGA) nanospheres containing magnetic materials have been extensively studied because of its biomedical applications. Therefore, it is very important to know thermal properties of these materials in addition to other physical properties. Thermal degradation activation energy (Eα) of PLGA nanospheres with maghemite entrapment (PLG
Mat. Res.. Publicado em: 24/11/2015
-
12. Uncertainty analysis of a flexible rotor supported by fluid film bearings
AbstractThis paper is dedicated to the analyses of the effect of uncertain parameters on the dynamic behavior of a flexible rotor containing two rigid discs and supported by two fluid film bearings. A stochastic method has been extensively used to model uncertain parameters, i.e., the so-called Monte Carlo simulation. However, in the present contribution, th
Lat. Am. j. solids struct.. Publicado em: 2015-08