Horizontal Forces
Mostrando 1-12 de 46 artigos, teses e dissertações.
-
1. On the use of parameter γ z in fire situation
Resumo A seguir será apresentado um estudo sobre o uso do parâmetro γz em pórticos de concreto armado em situação de incêndio. Atualmente, não se têm resultados de investigação similar em estruturas de concreto, já que o tema não tem recebido atenção adequada. Em situação de incêndio muitas das ações horizontais deixam de ser consideradas
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
2. WIND EFFECTS ON FOUNDATIONS OF SILOS AND LIGHT STRUCTURES: SOLUTION BY USE OF STEEL PILES IN DIABASIC SOIL
ABSTRACT Wind solicitations generate horizontal, tensile, and compressive stresses on building foundations. In empty light structures, such as agricultural greenhouses and, in the specific case of silos and elevated structures such as metal water tanks, the consideration of these loads becomes important because the lack of the weight component due to the sto
Eng. Agríc.. Publicado em: 19/06/2019
-
3. Hankel transformation method for solving the Westergaard problem for point, line and distributed loads on elastic half-space
Abstract The Hankel transformation method was used in this work to determine the normal and shear stress distributions due to point, line and distributed loads applied to the surface of an elastic media. The elastic media considered in this study was assumed to be inextensible in the horizontal directions, and the only non-vanishing displacement component is
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
4. Superposition of Stress Fields in Diametrically Compressed Cylinders
Abstract The theoretical analysis for the Brazilian test is a classical plane stress problem of elasticity theory, where a vertical force is applied to a horizontal plane, the boundary of a semi-infinite medium. Hypothesizing a normal radial stress field, the results of that model are correct. Nevertheless, the superposition of three stress fields, with two
Lat. Am. j. solids struct.. Publicado em: 2016-10
-
5. Dynamic response of a 120 mm smoothbore tank barrel during horizontal and inclined firing positions
AbstractIn this study, the dynamic interaction between a 120 mm smoothbore tank barrel modeled as an Euler-Bernoulli cantilever beam and an accelerating projectile during firing is presented. The interaction was modelled using a new FEM approach that took into account the projectile's inertia, Coriolis, and centripetal forces and the horizontal and inclined
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
6. Ground reaction forces during level ground walking with body weight unloading
Background: Partial body weight support (BWS) systems have been broadly used with treadmills as a strategy for gait training of individuals with gait impairments. Considering that we usually walk on level ground and that BWS is achieved by altering the load on the plantar surface of the foot, it would be important to investigate some ground reaction force (
Braz. J. Phys. Ther.. Publicado em: 09/01/2015
-
7. 3D finite element modeling of grains refinement for magnesium alloys by extrusion-shear and experimental verification
To explore the deformation mechanisms of a new composite extrusion including extrusion and successive shear subsequently which is shorten "ES", Three dimensional finite element modeling of grain refinements for magnesium alloys by ES process has been researched. The ES die have been designed and manufactured and installed to the horizontal extruder. Finite e
Mat. Res.. Publicado em: 28/07/2014
-
8. EXPERIMENTAL STUDY OF ELONGATED BUBBLES IN HORIZONTAL TWO-PHASE INTERMITTENT FLOW / ESTUDO EXPERIMENTAL DE BOLHAS ALONGADAS NO ESCOAMENTO BIFÁSICO HORIZONTAL INTERMITENTE
The present work experimentally studied several relevant dynamic characteristics of gas-liquid intermittent flow through a horizontal pipe. All tests were performed in a test section formed by 50.8 mm internal diameter pipe using air and water as working fluids. The tests covered a region where the flow undergoes a complex transition from elongated bubble fl
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/04/2012
-
9. Study of tension in the periodontal ligament using the finite elements method
Orthodontic movement is process of transformation of a physical stimulation into a force applied to a tooth, with a biological response identified as bone remodelling. Although it is possible to measure the force applied on a tooth, its distribution around the root is irregular forming areas of higher concentration of tensions, which do not correspond to the
Dental Press Journal of Orthodontics. Publicado em: 2012-02
-
10. Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)
The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the vi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/09/2011
-
11. Estudo biomecânico do processo de aquisição da marcha independente em bebês
A aquisição da marcha independente é um importante marco desenvolvimental e considerada o maior desafio biomecânico a ser vencido pela criança. Nos primeiros 5-6 meses do andar independente, rápidas mudanças acontecem em todos os parâmetros da marcha. Um aspecto que se destaca é o grau de variabilidade apresentado pelo padrão de marcha nessa fase,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/07/2011
-
12. Mechanical evaluation of space closure loops in Orthodontics
This study evaluated the mechanical performance of teardrop-shaped loops and teardrop-shaped loops with helix used in orthodontic space closure. Sixty retraction loops made with 0.019" x 0.025" stainless steel (SS) and beta-titanium (BT) wires were used. They were attached to a testing machine to measure the magnitudes of the sagittal force and the load-defl
Brazilian Oral Research. Publicado em: 21/01/2011