High Voltage Sensors
Mostrando 1-12 de 19 artigos, teses e dissertações.
-
1. Experimental Investigation of Ionization Sensors under Shock Tube Stagnation Conditions
ABSTRACT: Recently, there has been a growing interest in studies concerning ionization sensors for aerospace applications, power generation, and fundamental research. In aerospace research, they have been used for studies of shock and detonation waves. Two key features of these sensors are their short response time, of the order of microseconds, and the fact
J. Aerosp. Technol. Manag.. Publicado em: 2017-06
-
2. Analysis and Comparison of Sensors for Measurements of Partial Discharges in Hydrogenerator Stator Windings
Abstract In order to measure electrical signals produced by partial discharges in hydrogenerators stator windings, capacitive couplers are regularly used. They are electrically connected to the windings and therefore, require undesired insulation intrusion. For avoiding such an intrusion, a microstrip directional coupler is used, which is experimentally and
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2015-12
-
3. Study and characterization of indium oxynitride photoconductors
Multifunctional materials are a new class of thin films and coatings. These materials show interesting characteristics for application in many scientific areas, in special electronic and photonic technologies. These characteristics include sensitivity for thermal, light, mechanical, chemical and other influences, high resistivity, high electrical isolation a
Mat. Res.. Publicado em: 03/12/2013
-
4. Interferômetros recuperadores de baixa tensão de meia onda para sistemas interferométricos de luz branca utilizando moduladores eletro-ópticos. / Low half wave voltage recovery interferometers for white light interferometry systems using electrooptic modulators.
O trabalho tem por objetivo o estudo e o desenvolvimento de interferômetros recuperadores com baixa tensão de meia onda utilizando moduladores eletro-ópticos para serem aplicados em sistemas Interferométricos de luz branca. Ele dá continuidade às pesquisas do autor em seu mestrado, em que foi desenvolvido e testado um sistema de sensoriamento eletro-ó
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/08/2011
-
5. Sistema automático para caracterização de sensores a fibra óptica para alta tensão / Characterization system for fiber optics based sensors for high-voltage
Esta dissertação aborda o projeto de um sistema de caracterização de sensores baseados em fibras ópticas para alta-tensão. O sistema é formado por dois módulos principais, um relacionado com a câmara térmica e outro relativo à alta-tensão. O desenvolvimento do sistema deve-se basicamente às necessidades de personalização e precisão para a car
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2010
-
6. Optical detection system of partial discharges on insulator strings of high voltage transmission lines / Sistema de detecÃÃo Ãptica de descargas parciais em cadeias de isoladores de linhas de transmissÃo de alta tensÃo
Leakage current monitoring is frequently used to evaluate the degradation in the insulation capacity of insulator strings of overhead transmission lines, due to pollution. The pollutants accumulation over the surface of the insulators strings, together with humidity, lead to an increase in the current leak over the insulatorâs surface, in turn producing the
Publicado em: 2008
-
7. Optical voltage transformers using white light interferometry for high voltage measurements. / Transformador óptico por interferometria de luz branca para medição de altas tensões.
A new approach to perform measurement of potentials in high voltage levels using electrooptical Pockels sensors is presented here. This work describes an application of the White Light Interferometry technique to a high voltage optical fiber measurement system. In this system the information is encoded in the spectrum of the light, allowing the measurement t
Publicado em: 2006
-
8. Uma contribuição ao estudo e desenvolvimento de sensores de alta tensão baseados em fibras opticas / A contribution to the study and development of high voltage fiber optics sensors
Os sensores a fibra óptica são especialmente indicados para operarem em ambientes eletricamente ruidosos, uma vez que são imunes aos efeitos da interferência eletromagnética (EMI) encontrados nestes ambientes. Tal característica faz com que os sensores ópticos sejam altamente vantajosos para as aplicações nos sistemas de sensoreamento utilizados pel
Publicado em: 2006
-
9. Sistema de monitoramento e metodologia de estimativa dos tempos de operação do disjuntor. / Monitoring system and methodology to estimation of circuit breaker operation times.
The present work addresses the development of a circuit breaker monitoring system so as to collect information for predictive maintenance. The characteristics of the variables that are monitored through certain sensors linked to the circuit breaker, its acquisition and the treatment of the information, are analyzed. A prototype was developed and installed at
Publicado em: 2005
-
10. DEVELOPMENT AND CHARACTERIZATION OF A FIELD MAGNETIC TRANSDUCER BASED ON GIANT MAGNETOIMPEDANCE EFFECT / DESENVOLVIMENTO E CARACTERIZAÇÃO DE UM TRANSDUTOR MAGNÉTICO BASEADO NO EFEITO DA MAGNETOIMPEDÂNCIA GIGANTE
In this dissertation, it is proposed the design of a magnetic field to voltage transducer based on the Giant Magnetoimpedance phenomenon (GMI), characterized by an innovative geometric configuration. In order to attain the best near-field sensibility and far-field immunity, the transducer`s sensitive element and electronic circuit were planned and implemente
Publicado em: 2005
-
11. Desenvolvimento de dispositivo para calibraÃÃo de sensor de umidade do solo e aplicaÃÃo em sensores tipo tensiÃmetro eletrÃnico e resistÃncia elÃtrica / Development of apparatus for soil moisture calibration was developed and built (DCSUS) and application in sensors electronic type an electronic tensiometer and electric resistance.
Na apparatus for soil moisture calibration was developed and built (DCSUS). The moisture was controlled indirectly by controlling the soil water matrix potenctial using both a porous plate funnel and a pressure chamber system. A 3.0 m high tower wal built in steel and a scale installed on its top. The scale components were an I-bean articulated in its center
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/09/2004
-
12. FabricaÃÃo e caracterizaÃÃo elÃtrica de heterojunÃÃes de polianilina-silÃcio para aplicaÃÃo em dosimetria de radiaÃÃo gama
In this work a technique has been developed to fabricate high quality polyanilinesilicon heterojunction diodes for use as gas and/or ionizing radiation sensors. Polyaniline thin films (40 nm thick) produced by spin-coating on silicon substrates, were the active part of the junction structure. The devices presented excellent reproducibility of their electrica
Publicado em: 2004