High Temperatures
Mostrando 1-12 de 2249 artigos, teses e dissertações.
-
1. Catalysts Derived from Thermal Treatments of Hydrocalumite-Type Compounds: Synthesis and Application in Transesterification Reactions
Catalyst performance is a relevant factor in biodiesel production because it can affect the efficiency of the process. This work provides a study of the performance of heterogeneous catalysts for biodiesel production derived from thermal-treated hydrocalumite-type compounds. This work aimed to synthesize and characterize hydrocalumite-type compounds intercal
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Mullite macro-needles for reinforcement of refractory castables
Abstract Ceramic macro-needles incorporation as reinforcement in commercial refractory castable was studied. Ceramic macro-needles (Ø2x20 mm) were made from kaolinite clay and gibbsite to obtain mullite as the main crystalline phase. Specimens with the ceramic reinforcement were evaluated by compression after being treated at two temperatures (815 and 1400
Cerâmica. Publicado em: 2022
-
3. EFFECT OF REACTION CONDITIONS ON PARTICLE SIZE OF ZNO NANOPARTICLES VIA CONTROLLED PRECIPITATION METHOD AND IN-VITRO ANTIBACTERIAL CAPACITY
High-yield ZnO spheroidal nanoparticles with an average diameter around 23 nm (≈ 25% frequency) and 30 nm (≈ 28% frequency) were obtained by controlled semicontinuous precipitation at low temperatures. This synthesis was obtained from hydrozincite (Zn5(CO3)2(OH)6) as primary nanoparticles. The Zn5(CO3)2(OH)6 nanoparticles were synthesized by hydrolysis o
Química Nova. Publicado em: 2022
-
4. Post-Occupancy Evaluation of an educational building: Case study of the ETS-UESC Building
Abstract The physical and environmental conditions of educational institutions are determining factors for occupant comfort. The Post-Occupancy Evaluation (POE) presents itself as a methodology for verifying environmental aspects in full use, considering the technical criteria and the users' perception. This article discusses the particularities of the ETS-U
REM - International Engineering Journal. Publicado em: 2022
-
5. Selective formation of neodymium phosphate from iron-neodymium magnet waste
Abstract Neodymium-iron-boron alloy, Nd2Fe14B, is used as a material for magnets. Neodymium is one of the valuable and expensive rare earth elements and is often recovered to reduce costs and environmental impact. Recently, a method for recovering neodymium as neodymium phosphate from mixed solutions was reported. This method was very useful because the main
Cerâmica. Publicado em: 2022
-
6. Finite element computational development for thermo-mechanical analysis of plane steel structures exposed to fire
Abstract This article presents a numerical formulation based on finite element procedures for application in nonlinear thermo-mechanical analyses of steel planar structures under fire condition. The mechanical properties of structural elements degrade when subjected to high temperatures, resulting in significant reductions in strength and stiffness. Under th
REM - International Engineering Journal. Publicado em: 2022
-
7. EVALUATION OF LIMA BEAN ACCESSIONS AT HIGH TEMPERATURES
RESUMO - A cultura do feijão-fava (Phaseolus lunatus L) desenvolve-se em faixa ótima de temperaturas de 20-30°C, sendo que, as temperaturas superiores a 30-35ºC compromete a eficiência fotossintética e consequentemente desempenho produtivo. Considerando a importância do cultivo de feijão-fava, objetivou-se realizar a caracterização morfoagronômica
Revista Caatinga. Publicado em: 2022
-
8. ASSOCIATIVE MAPPING FOR EXOTIC SOYBEAN GERMPLASM GRAIN YIELD IN HIGH TEMPERATURES
RESUMO A soja está entre as principais culturas do mundo, pois é uma excelente fonte de proteínas, micronutrientes e óleo. Considerando que o estresse abiótico afeta o agronegócio, acarretando em perdas, a produtividade de grãos da cultura deve ser mantida mesmo sob altas temperaturas. Nesse contexto, o objetivo deste trabalho foi selecionar marcadore
Revista Caatinga. Publicado em: 2022
-
9. Forced-air warming and continuous core temperature monitoring with zero-heat-flux thermometry during cesarean section: a retrospective observational cohort study
Abstract Background: Over 30% of parturients undergoing spinal anesthesia for cesarean section become intraoperatively hypothermic. This study assessed the magnitude of hypothermic insult in parturients and newborns using continuous, high-resolution thermometry and evaluated the efficiency of intraoperative forced-air warming for prevention of hypothermia.
Brazilian Journal of Anesthesiology. Publicado em: 2022
-
10. Utilization of the Corncob Agro-Industrial Residue as a Potential Adsorbent in the Biosorption of Bisphenol-A
The presence of plastic waste in water bodies has led to a growing concern due to the impact on human health. Among the most important plastic additive molecules is bisphenol-A (BPA). On the other hand, micro-pollutant removal processes that make use of agro-industrial waste have aroused the interest of researchers. This is because the accumulation of lignoc
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
11. Storage of soybean with high percentage of grains damaged by bugs in the crop
ABSTRACT Bugs are pest insects that, when not adequately controlled, may cause significant losses in the soybean crop. Their damage to grains compromises delivery in the storage unit and storage success. Thus, the objective of this study was to evaluate, during storage, the effect of temperature and moisture content on soybean grain quality with high damage
Rev. Ceres. Publicado em: 2021-06
-
12. Cold sintering and electric characterization of ZnO-BaTiO3 composites
Abstract The sintering is an essential step in the processing of ceramics materials. A number of researchers have reported new techniques for sintering. However, in general, the process still demands high temperatures. This paper reports the results of the cold sintering of ZnO-BaTiO3 composites. The microstructural, structural, and electric properties of th
Cerâmica. Publicado em: 2021-03