High Energy
Mostrando 1-12 de 3479 artigos, teses e dissertações.
-
1. Exergy and emergy: complementary tools for assessing the environmental sustainability use of biosolids generated in wastewater-treatment plant for energy-production
Taking advantage of the energy contained in the biosolids generated in a wastewater treatment plant (WWTP) is one of the processes of greatest interest due to the opportunity to obtain an energy resources from a waste. The aim of this research was to analyze the environmental sustainability use of biosolids generated in a wastewater-treatment plant for energ
Química Nova. Publicado em: 2022
-
2. Thermophysical and Transport Properties of the BaCl2-CsCl High Temperature Ionic Liquid Mixtures
High temperature ionic liquids (HTILs) densities and transport properties for mixtures BaCl2 CsCl, x(BaCl2) = 0-1, have been studied as a function of composition and temperature. In terms of Arrhenius theory, the temperature correlation of all measured properties was made and discussed. Thermodynamic properties (isothermal compressibility, molecular volume,
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Bone, fat, and muscle interactions in health and disease
Abstract Energy metabolism is a point of integration among the various organs and tissues of the human body, not only in terms of consumption of energy substrates but also because it concentrates a wide interconnected network controlled by endocrine factors. Thus, not only do tissues consume substrates, but they also participate in modulating energy metaboli
Archives of Endocrinology and Metabolism. Publicado em: 2022
-
4. Diesel-Like Biofuels Production Using Fatty Waste
According to the waste-to-energy (WTE) valorization and circular economy principles, the use of waste oil and grease (WOG) for obtaining biofuels shows the tendency towards sustainability, makes the interest in green chemistry, and the development of environmentally friendly processes grow. Three different fatty wastes (from the fat trap of a sewage station,
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. Household Infrared Technology as an Energy-Efficient Approach to Achieve C-Cπ Bond Construction Reactions
We examined the ability of short-wave infrared (IR) light in the λ1.5-3.0 μm region of the infrared emission spectrum to accomplish C-Cπ bond construction reaction between π-excessive azaheteroaromatic and different carbonyl substrates supported on a bentonitic clay catalyst in solventless condition via a three-component condensation reaction. Preliminar
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
6. Heterogeneous Fenton-like catalytic degradation of phenazine dye over CeO2 (CP-2) nanoscale powder
Abstract A heterogeneous Fenton-like process was explored for oxidation of phenazine dye using ceria polishing material (CP-2). XRD, SEM, FTIR, UV-vis DRS, and pHPZC techniques were applied to characterize the catalyst features. The performance of the heterogeneous Fenton-like process was investigated under various parameters (reaction time, pH, H2O2 concent
Cerâmica. Publicado em: 2022
-
7. Radiation Balance and Partitioning of Latent and Sensible Heat Fluxes Over a Lime Orchard in Eastern Amazon
Abstract We investigate the balance of radiation and energy over a lime orchard in Eastern Amazon and how it relates to environmental conditions. We found that lime trees aged between 6 and 7 years old reflect 11.0% to 14.5% of incoming shortwave radiation, and the latent heat flux corresponds to 57.6% and 66.6% of the daily net radiation in the dry season (
Revista Brasileira de Meteorologia. Publicado em: 2022
-
8. Tuning the Photocatalytic Activity of Tin Oxide through Mechanical Surface Activation
Tin oxide (SnO2) nanoparticles were synthesized by the co-precipitation method and mechanically modified by high-energy ball milling. The experimental results demonstrate that the collision with zirconia balls produces slight changes in the crystalline, electronic, morphological, and surface properties of SnO2, which lead to an increase in the redox potentia
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
9. X-ray line profile analysis and magnetic and optical properties of FexZn0.95-xCr0.05O nanoparticles fabricated by sol-gel route
Abstract FexZn0.95-xCr0.05O nanoparticles have been obtained for the different concentrations of Fe ions by using the sol-gel method. The hexagonal wurtzite structure of all the samples was confirmed by Rietveld refined X-ray diffraction patterns. The addition of Fe ions decreased lattice constants a and c from 3.2487 to 3.2474 Å and 5.2043 to 5.2029 Å, re
Cerâmica. Publicado em: 2022
-
10. A review on the ceramic additive manufacturing technologies and availability of equipment and materials
Abstract Ceramic additive manufacturing allows the fabrication of small series of complex parts without the high costs of molds usually associated with traditional ceramic processing. Although research into ceramic 3D printing by all technologies started back in the 90s, its industrial application is still quite restricted when compared to polymers and metal
Cerâmica. Publicado em: 2022
-
11. Mediators of energy homeostasis in hyperthyroidism
ABSTRACT Objective: The aim of this study was to assess the effect of hyperthyroidism and its treatment on body weight and composition, insulin resistance, and mediators of appetite and energy homeostasis, namely ghrelin, leptin, adiponectin, and fibroblast growth factor 21 (FGF21). Subjects and methods: Thirty-five adult patients (27 female and 8 male, ag
Archives of Endocrinology and Metabolism. Publicado em: 2022
-
12. Time to achieve steady state for an accurate assessment of resting energy expenditure in adolescents with healthy weight and obesity: A cross-sectional study
ABSTRACT Objective: The present study investigated the time needed to achieve a steady state for an accurate assessment of resting energy expenditure (REE) in adolescents with healthy weight and obesity. Materials and methods: Thirty adolescents aged 12-17 years were assigned to a group with healthy weight (GHW; n = 12, body mass index [BMI] 22.5 ± 3.6 kg
Archives of Endocrinology and Metabolism. Publicado em: 2022