Heat Flux
Mostrando 1-12 de 186 artigos, teses e dissertações.
-
1. Radiation Balance and Partitioning of Latent and Sensible Heat Fluxes Over a Lime Orchard in Eastern Amazon
Abstract We investigate the balance of radiation and energy over a lime orchard in Eastern Amazon and how it relates to environmental conditions. We found that lime trees aged between 6 and 7 years old reflect 11.0% to 14.5% of incoming shortwave radiation, and the latent heat flux corresponds to 57.6% and 66.6% of the daily net radiation in the dry season (
Revista Brasileira de Meteorologia. Publicado em: 2022
-
2. Forced-air warming and continuous core temperature monitoring with zero-heat-flux thermometry during cesarean section: a retrospective observational cohort study
Abstract Background: Over 30% of parturients undergoing spinal anesthesia for cesarean section become intraoperatively hypothermic. This study assessed the magnitude of hypothermic insult in parturients and newborns using continuous, high-resolution thermometry and evaluated the efficiency of intraoperative forced-air warming for prevention of hypothermia.
Brazilian Journal of Anesthesiology. Publicado em: 2022
-
3. Erosion of the nocturnal boundary layer in the central Amazon during the dry season
RESUMO Este estudo teve como objetivo analisar a erosão da camada limite noturna (CLN) na Amazônia central durante a estação seca de 2014, usando dados do Projeto GoAmazon 2014/5 e saídas do modelo de alta resolução (PArallelized Les Model - PALM). O conjunto de dados consistiu de medidas por instrumentos in situ (radiossonda) e sensoriamento remoto (
Acta Amaz.. Publicado em: 25/11/2019
-
4. Theoretical and Experimental Heat Transfer in Solid Propellant Rocket Engine
ABSTRACT: Accurate determination of heat flux is an important task not only in the designing aspect, but also in the performance analysis of rocket engines. In this purpose, this work deals with the heat flux determination in a combustion chamber through the inverse method. In this approach, the transient heat flux is determined from the experimental tempera
J. Aerosp. Technol. Manag.. Publicado em: 26/08/2019
-
5. Studies on Heat Flux Imparted on Thermal Insulation Inside Rocket Motor Containing Double Base Propellant
ABSTRACT Thermal insulation inside the rocket motor experience severe pressure and temperature conditions. Experimental determination of heat flux imparted to thermal insulator inside the rocket motor during the static firing is a challenging task. This paper reports experimental determination of heat flux for double base propellant (DBP) in small rocket mot
J. Aerosp. Technol. Manag.. Publicado em: 10/07/2019
-
6. Performance of the INCONEL 625 alloy weld overlay obtained by FCAW process
ABSTRACT Nickel-based weld overlays (cladding) are commonly used in oil & gas industry to extend the life of equipment under corrosive environment, as it improves the corrosion resistance without a significant increase in the manufacturing cost, when compared to a full nickel-based alloy equipment. Although there are extensive literature involving overlays a
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. Evaluation of OSEB and SEBAL models for energy balance of a crop area in a humid subtropical climate
ABSTRACT This study evaluated the adequacy of the One-Source Energy Balance (OSEB) and Surface Energy Balance Algorithm for Land (SEBAL) models to estimate evapotranspiration in grain growing areas with humid subtropical climate in Rio Grande do Sul, southern Brazil. The dataset was obtained from a micrometeorological station (Eddy Covariance) and MODIS (Mod
Bragantia. Publicado em: 01/11/2018
-
8. Caracterización de soldaduras cuproaluminotérmica en cañerías de conducción para la protección catódica
ABSTRACT Copper-Aluminothermic weld is a process in which welder is generated by thermofusion. The necessary heat is obtained by the aluminum reducing effect above copper oxide, creating a high temperature exothermic reaction, in which melt and overheated copper is the filler material [1].This technique is used to joint rails in railway industry, in groundin
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Evolución microestructural in-situ a alta temperatura de depósitos de soldadura de aceros 9Cr con diferentes contenidos de boro
ABSTRACT New alloys have been developed for enhancing the performance of the equipment used in thermoelectric power generation industry. With the objective of increasing the creep resistance of these materials, changes in the content of some microalloying elements were carried out. Boron bearing in creep strength enhanced 9Cr steel (CSE9Cr) welds improved ma
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Identificación de precipitados en aleaciones U-Nb-Zr tratadas térmicamente a 850 ºC
ABSTRACT At the present, the international goal is to develop and qualify a very high U density fuel for high flux research reactors. The selected U-alloy must present an isotropic crystalline structure at the end of the fuel fabrication process. These types of structures exhibit stable behavior under irradiation. In particular, it is wanted to retain as met
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Estudio de la microestructura de un cordón de soldadura de un acero P91 mediante microscopía electrónica de transmisión
ABSTRACT In the present work the microstructural characterization of a single-pass weld of 9Cr1MoVNb P91 steel performed by the flux-cored arc welding (FCAW) process in the “as welding” condition has been carried out by means of transmission electron microscopy. P91 steel offers a good weldability, but the mechanical properties of the welded joints are f
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. GREEN ROOF: SIMULATION OF ENERGY BALANCE COMPONENTS IN RECIFE, PERNAMBUCO STATE, BRAZIL
ABSTRACT Green roof is a technology that consists of the use of soil and vegetation installed in the roof of buildings, being a great solution to combat heat islands. Thus, this study aimed to compare micrometeorological changes and their effect on the energy balance of non-vegetated (slab) and vegetated building roofs by means of a simulation model calculat
Eng. Agríc.. Publicado em: 2018-06