Heat Flux
Mostrando 13-24 de 186 artigos, teses e dissertações.
-
13. Energy balance partitioning and evapotranspiration from irrigated Muskmelon under Semi-Arid Conditions
ABSTRACT The Mossoró-Assu-Baraúna district, Rio Grande do Norte State (RN), is recognized by the intense production of horticulture, mainly muskmelon for export. However, this region is often devastated by intense droughts. Thus, the muskmelon production is predominantly under irrigated condition and, due to constant threat of water resources collapse on t
Bragantia. Publicado em: 2018-03
-
14. Mathematical Modeling And Numerical Simulation of Dropwise Condensation on an Inclined Circular Tube
ABSTRACT: Dropwise condensation can improve heat transfer process and, consequently, leads to considerable reduction in size and weight of condensers as well as improvement in the dehumidification process in many applications, especially in civil transport aircraft. It can also be used as an efficient cooling tool for electronics and electrical systems in ai
J. Aerosp. Technol. Manag.. Publicado em: 2017-12
-
15. Rolling Contact Fatigue Life of Rail for Different Slip Conditions
Abstract A three-dimensional elastic-plastic finite element analysis (FEA) is carried out to estimate the rolling contact fatigue (RCF) crack initiation life for varied slip range on the rail arising from operational variations. The wheel load produces Hertzian contact pressure. Variation in engine traction induces slip variations that evolves thermal load i
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
16. REFERENCE EVAPOTRANSPIRATION FORECASTING BY ARTIFICIAL NEURAL NETWORKS
ABSTRACT: Evapotranspiration (ET) is the main component of water balance in agricultural systems and the most active variable of the hydrological cycle. In the literature, few studies have used the forecast the day before via Artificial Neural Networks (ANNs) for the northern region of São Paulo state, Brazil. Therefore, this aimed to predict the reference
Eng. Agríc.. Publicado em: 2017-12
-
17. Aerothermodynamic Optimization of Aerospace Plane Airfoil Leading Edge
ABSTRACT: Aiming to mitigate the aerodynamic heating during hypersonic re-entry, the aerothermodynamic optimization of aerospace plane airfoil leading edge is conducted. Lift-to-drag ratio at landing condition is taken as a constraint to ensure the landing aerodynamic performance. First, airfoil profile is parametrically described to be more advantageous dur
J. Aerosp. Technol. Manag.. Publicado em: 02/10/2017
-
18. Cyclic Polarization Study of Thick Welded Joints of Lean Duplex Stainless Steel for Application in Biodiesel Industry
Thick welded joints of UNS S32304 lean duplex stainless steel (LDSS) has been studied in acidified glycerin, a byproduct of biodiesel plants, using cyclic polarization technique. LDSS S32304 thick plates were welded by different processes commonly employed in the fabrication process: shielded metal arc welding, gas metal arc welding and flux cored arc weldin
Mat. Res.. Publicado em: 12/12/2016
-
19. Analysis of reverse heat transfer for conventional and optimized lubri-cooling methods during tangential surface grinding of ABNT 1020 steel
Abstract A numerical thermal model was developed to evaluate the heat flux which is conducted to a rectangular workpiece of steel plate ABNT 1020, thus making it possible to compute the maximum temperature in the grinding surface, taking into account the rectangular distribution of heat flux, the thermal properties of the grinding wheel conventional Al2O3, t
REM, Int. Eng. J.. Publicado em: 2016-12
-
20. Two-Dimensional Fractional Order Generalized Thermoelastic Porous Material
AbstractIn the work, a two-dimensional problem of a porous material is considered within the context of the fractional order generalized thermoelasticity theory with one relaxation time. The medium is assumed initially quiescent for a thermoelastic half space whose surface is traction free and has a constant heat flux. The normal mode analysis and eigenvalue
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
21. Influence of Heat Treatment in Residual Stresses Generated in P91 Steel-pipe Weld
The knowledge of residual stress arising from the welding processes is extremely important because the mechanical properties of the welded components are not only determined by the microstructures present in the joint, but also by the heterogeneous residual stresses introduced during the thermal cycle in welding processes. The aim of this work is the charact
Mat. Res.. Publicado em: 2015-06
-
22. Comparison Between the Heating Rates of a Magnetic Induction Soldering Iron and Another One Composed of Resistance
AbstractIn this work an experimental and comparative analysis is realized in order to determine the difference in the heating rate and thus the power consumption, between a magnetic induction soldering iron and another one of low cost composed of electric resistance. By maintaining a constant power supply 40 W, three models of comercial tips designed for the
Soldag. insp.. Publicado em: 2015-06
-
23. Improved green coffee oil antioxidant activity for cosmetical purpose by spray drying microencapsulation
AbstractThe oil extracted by cold pressing unroasted coffee beans, known as green coffee oil, has been widely used for cosmetic purposes. The objective of this work was to prepare and characterize microcapsules containing green coffee oil and to verify its antioxidant activity under the effect of light, heat and oxygen. The encapsulating material was arabic
Rev. bras. farmacogn.. Publicado em: 2015-06
-
24. NOVEL SIMILARITY-SOLUTION WHICH IS APPLICABLE FOR FREE CONVECTION OVER A BODY OF ARBITRARY SHAPE: THERMAL NON-EQUILIBRIUM IN A POROUS MEDIUM
Abstract The study of the natural convection flow and heat transfer from hot surfaces in a porous medium has been of considerable interest in energy-related engineering problems. This paper is concerned with the free convection heat transfer over an arbitrary hot surface in a porous medium. It is assumed that the fluid and solid phases are not in local therm
Braz. J. Chem. Eng.. Publicado em: 2015-03