Heat Exchangers
Mostrando 1-12 de 98 artigos, teses e dissertações.
-
1. PHYSICAL AND THERMAL PROPERTIES OF EUCALYPTUS WOOD CHARCOAL.
ABSTRACT The knowledge of the physical and thermal properties of eucalyptus charcoal is of fundamental importance in the design of equipment and development of cooling technologies. However, literature about physical properties for eucalyptus wood charcoal is largely unavailable, especially the thermal and aerodynamic properties, for the same material. The a
CERNE. Publicado em: 2020-03
-
2. Resistência à Corrosão de Juntas Dissimilares dos Aços AISI 316L e da Liga Inconel 718
Resumo A soldagem dissimilar (Dissimilar Metal Welds – DMWs), união de dois diferentes materiais metálicos, tem muitas aplicações industriais, com destaque para trocadores de calor nas usinas nucleares. Portanto, devem resistir à corrosão e a esforços mecânicos, entre outros requisitos. Neste trabalho foi abordada a susceptibilidade à corrosão d
Soldag. insp.. Publicado em: 21/10/2019
-
3. THERMAL PERFORMANCE OF ONE-PASS SHELL-AND-TUBE HEAT EXCHANGERS IN COUNTER-FLOW
Abstract A computational methodology is proposed and applied to calculate the temperature effectiveness, P, and the logarithmic mean temperature difference (LMTD) correction factor, F, of TEMA E shell-and-tube heat exchangers with one-pass and fluids flowing in counter-flow. An arbitrary number of baffles is considered along with three different mixture cond
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
4. Bulk water charges in the dairy industry: A case study of interstate basins in Minas Gerais, Brazil
RESUMO: A água é um insumo essencial para qualquer agroindústria, utilizada para diversas finalidades, como em procedimentos de higienização, trocadores de calor e formulação de bebidas. Dessa forma, a cobrança pelo uso da água bruta, regulamentada no Brasil pela Política Nacional de Recursos Hídricos - Lei nº 9.433/97 e leis estaduais, é um te
Cienc. Rural. Publicado em: 23/09/2019
-
5. Simulação termodinâmica computacional de liga modelo de aço super ferrítico contendo 0,07% de boro
RESUMO Aços inoxidáveis super ferríticos são utilizados em equipamentos como trocadores de calor e torres de destilação que operam em condições extremas de temperatura, pressão e em ambientes contendo altas concentrações de cloretos, H2S e CO2, encontradas nas novas áreas de exploração de petróleo e gás na costa brasileira. Uma liga super fer
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Estudo dos Parâmetros de União por Difusão do Aço Inoxidável AISI 316L
Resumo A união por difusão é uma técnica de união no estado sólido capaz de ligar dois materiais metálicos por meio da difusão atômica na interface de contato, sem o uso de metal de adição. Este processo é adequado para a união de grandes áreas com uma alta resistência mecânica, permitindo ao equipamento operar com elevadas pressões de traba
Soldag. insp.. Publicado em: 16/05/2019
-
7. Acondicionamiento del gas inhalado en pacientes con vía aérea artificial. Revisión narrativa
ABSTRACT Instrumentation of the airways in critical patients (endotracheal tube or tracheostomy cannula) prevents them from performing their function of humidify and heating the inhaled gas. In addition, the administration of cold and dry medical gases and the high flows that patients experience during invasive and non-invasive mechanical ventilation generat
Rev. bras. ter. intensiva. Publicado em: 2018-03
-
8. SIMULATION OF VENTILATION SYSTEMS IN A PROTECTED ENVIRONMENT USING COMPUTATIONAL FLUID DYNAMICS
ABSTRACT Computational simulations of mass and energy flow help in implementing alternative cooling systems in protected environments. The aim of this study was to model and simulate the interaction between external and internal environments of a protected environment by means of computational fluid dynamics (CFD) techniques and validate micrometeorological
Eng. Agríc.. Publicado em: 2017-06
-
9. Application of optimization for improvement of the efficiency of louvered-fin compact heat exchangers
Abstract A few decades ago, the product development process was just based on a trial and error procedure, and the designer's experience. The need for a new way to design and manufacture more economical and sustainable products corroborates increasingly to a new vision of how to create new products for the benefit of society. Modern numerical tools allow gre
REM, Int. Eng. J.. Publicado em: 2016-09
-
10. DETERMINATION OF THE EFFECTIVE RADIAL THERMAL DIFFUSIVITY FOR EVALUATING ENHANCED HEAT TRANSFER IN TUBES UNDER NON-NEWTONIAN LAMINAR FLOW
AbstractEnhanced heat transfer in tubes under laminar flow conditions can be found in coils or corrugated tubes or in the presence of high wall relative roughness, curves, pipe fittings or mechanical vibration. Modeling these cases can be complex because of the induced secondary flow. A modification of the Graetz problem for non-Newtonian power-law flow is p
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
11. Velocidad de corrosión de una aleación base plomo en una solución de ácido sulfúrico a diferentes temperaturas
Car batteries are not only affected by their use and wear but also by other factors such as electrolyte concentration, water loss and temperature that can be exposed, the latter being the most influential factor causing an increase in the corrosion rate of lead alloys (battery components), and affecting their service time. Therefore, for the industry of auto
Matéria (Rio J.). Publicado em: 2014-06
-
12. Heat transfer to immiscible liquid mixtures in a spiral plate heat exchanger
This work presents new predictive correlations for heat transfer to immiscible liquid-liquid mixtures in a spiral plate heat exchanger. Liquid-liquid heat transfer studies were carried out in spiral plate heat exchangers for the water-octane, water-kerosene, and water-dodecane systems. For each composition of the mixture, the mass flow rate of the cold fluid
Braz. J. Chem. Eng.. Publicado em: 2013-06