Heat Affected Zone Haz
Mostrando 1-12 de 43 artigos, teses e dissertações.
-
1. Caracterização Mecânica da Região Soldada de Tailor Welded Blanks (TWB) a Partir do Perfil de Microdureza
Resumo No Tailor Welded Blank (TWB) são soldadas chapas de especificações distintas, antes da conformação. Sua caracterização, na região soldada, por métodos convencionais de tração, pode ser dificultada pelo estreito comprimento da solda. Novas metodologias e alternativas são analisadas. Este trabalho visou caracterizar mecanicamente a região s
Soldag. insp.. Publicado em: 02/12/2019
-
2. Resistência à Corrosão de Juntas Dissimilares dos Aços AISI 316L e da Liga Inconel 718
Resumo A soldagem dissimilar (Dissimilar Metal Welds – DMWs), união de dois diferentes materiais metálicos, tem muitas aplicações industriais, com destaque para trocadores de calor nas usinas nucleares. Portanto, devem resistir à corrosão e a esforços mecânicos, entre outros requisitos. Neste trabalho foi abordada a susceptibilidade à corrosão d
Soldag. insp.. Publicado em: 21/10/2019
-
3. Nitretação a plasma da junta soldada do aço inoxidável super duplex SAF 2507
RESUMO Os aços inoxidáveis superduplex (AISD) apresentam em sua microestrutura as fases ferrita e austenita, de modo a conciliar boas propriedades mecânicas e de resistência à corrosão. Estes materiais possuem grande aplicação na indústria de extração de petróleo e na petroquímica. Quando estão sujeitos a estas aplicações, os dutos de AISD so
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Characterization of Phase Transformations and Microstructural Changes in an API 5CT L80 Steel Grade During Ni Alloy Laser Cladding
The superficial coatings in micro-alloyed steel pipes has been a pointed way to decrease the corrosion problems in oil and gas industry. However, little emphasis has been given to the substrate. The effects of the deposition method on the steel microstructure and properties are still not well described. In this context, this work studied the effect of Ni sup
Mat. Res.. Publicado em: 26/07/2018
-
5. Comportamiento frente a la corrosión de uniones soldadas por fricción agitación de AA7075-T651: Evaluación galvánica
ABSTRACT Friction Stir Welding (FSW) is a novel solid-phase welding process, which has proved to have a great potential for the realization of welded joints in materials with poor weldability such as heat-treatable aluminum alloys. The aerospace industry has incorporated this process for the manufacture of structural elements, using known high strength alloy
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Estudio de la microestructura de un cordón de soldadura de un acero P91 mediante microscopía electrónica de transmisión
ABSTRACT In the present work the microstructural characterization of a single-pass weld of 9Cr1MoVNb P91 steel performed by the flux-cored arc welding (FCAW) process in the “as welding” condition has been carried out by means of transmission electron microscopy. P91 steel offers a good weldability, but the mechanical properties of the welded joints are f
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Analysis of 3D Planar Laminations in a Welded Section of API 5L X52 Applying the Finite Element Method
Abstract The mechanical behavior of API 5L X52 steel with planar type laminations was studied in the present work. Planar laminations were proposed in the base metal (BM), heat affected zone (HAZ) and welding bead (WB). Three-dimensional finite element (FE) models, kinematic hardening and mechanical properties for BM, HAZ, and WB were activated in the finit
Soldag. insp.. Publicado em: 2018-03
-
8. Influence of heat treatments on the microstructure and degree of sensitization of base metal and weld of AISI 430 stainless steel
ABSTRACT AISI 430 is a non-stabilized ferritic stainless steel grade with carbon content lower than 0.12%.After hot and cold rolling this material is annealed. The slow cooling after soaking at temperatures between 900oC and 1000oC promotes the formation of a high quantity of carbides and nitrides, while the rapid cooling partially suppresses the formation o
Matéria (Rio J.). Publicado em: 08/01/2018
-
9. Welded Joints' Heat Affected Zone's Extension Prediction by Switching Welding Parameters
Choosing welding parameters is an important step in welding process, directly influencing in the heat input provided to welded joints. This heat input value, along with temperature distribution in welded joints, provides, to the drafter, conditions of predicting the Heat Affected Zone (HAZ) extension, the kind of microstructure to be formed, and therefore, t
Mat. Res.. Publicado em: 30/11/2017
-
10. Synthesis of Vanadium Interface for HFCVD Diamond Deposition on Steel Surface
Laser cladding of vanadium carbide powder developed an interlayer on AISI D6 steel as a diffusional barrier and to relief thermal residual stress. Laser cladding experiments varied resolution (DPI) and scanning speed (mm/s). CVD diamond deposition on this interface went on by HFCVD technique. The coatings were characterized by X-ray diffraction analysis (XRD
Mat. Res.. Publicado em: 06/07/2017
-
11. Phases quantification in DP600 steel welded by GTAW process using SEM and atomic force microscopy
The automotive industry is constantly under several challenges in many aspects, such as development of new materials and improvement their manufacturability. In order to achieve light weight, reduced emissions and ensure conductor safety, advanced high strength steels (AHSS) are able to fulfill these requirements. Dual phase steels (DP) are well suited for l
Mat. Res.. Publicado em: 20/02/2017
-
12. Comportamiento a la Corrosión del Acero API X70 Soldado por el Proceso de Doble Arco Sumergido Inmerso en Diferentes Medios Corrosivos
Abstract The steels API X70 are applied in construction and fabrication of pipeline for transport of hydrocarbons, however, to lapse time are degrade due to environment to which are exposed, influencing on mode and corrosion rate on surface base metal (BM), heat zone affected (HAZ) and fusion zone (FZ). In order to know and evaluate the corrosion susceptibi
Soldag. insp.. Publicado em: 2016-06