Gypsum
Mostrando 13-24 de 169 artigos, teses e dissertações.
-
13. Effect of techniques, trays and materials on accuracy of impressions clinically made
Resumo Introdução Realizar moldagens precisas e dimensionalmente estáveis que dupliquem a condição oral é um passo essencial para a confecção de restaurações indiretas de qualidade, garantindo seu sucesso e longevidade. Diversos estudos tem demonstrado os prós e contras de diferentes técnicas de moldagem, mas nenhum consenso da melhor técnica a
Rev. odontol. UNESP. Publicado em: 23/09/2019
-
14. Chemical conversion of a solid body of the composite gypsum/polyhydroxybutyrate in hydroxyapatite/polyhydroxybutyrate
Resumo A transformação do gesso em hidroxiapatita permite agregar valor a essa matéria-prima, pois a cerâmica obtida possui alto valor comercial em relação ao gesso, enquanto o polímero acrescenta propriedades de biocompatibilidade e bioatividade ao biocompósito. Assim, compósitos de hidroxiapatita/poli-hidroxibutirato foram preparados a partir do g
Cerâmica. Publicado em: 15/08/2019
-
15. Reabilitação térmica: Contributo das argamassas com incorporação de material de mudança de fase
RESUMO O setor residencial encontra-se muitas vezes envelhecido, apresentando necessidades de intervenções urgen-tes. Assim, torna-se importante reabilitar edifícios do ponto de vista estrutural, estético e funcional. A reabili-tação térmica é uma importante oportunidade para atingir níveis mais elevados de desempenho energético, reduzindo a elevad
Matéria (Rio J.). Publicado em: 10/06/2019
-
16. Classificação de argamassas com incorporação de materiais de mudança de fase com base nas suas propriedades físicas, mecânicas e térmicas
RESUMO Actualmente, existem várias argamassas disponiveis para aplicação na industria da construção. Estas argamassas podem ser baseadas em diferentes ligantes, possuir diferentes propriedades fisicas e mecânicas e até mesmo outras propriedades especificas. Contudo, a correta selecção de uma argamassa torna-se cada vez mais dificil. Assim, surge a n
Matéria (Rio J.). Publicado em: 10/06/2019
-
17. Análisis arqueométrico de pigmentos del sitio arqueológico Tambo Colorado por difracción de rayos X sincrotrón
ABSTRACT Despite the exceptional architecture and polychromy of archaeological site of Tambo Colorado, there has been no conservation work or in the architectural structures of raw earth, nor on the surfaces. These jobs require a proper understanding of the state of conservation of the site architecture and the analysis of the materials used. With this purpo
Matéria (Rio J.). Publicado em: 20/05/2019
-
18. Mechanical and Microstructural Properties of Redispersible Polymer-Gypsum Composites
Studies on gypsum modified by polymers have been conducted to assess the potential of improvement in the mechanical performance, water resistance and increasing the setting time, facilitating its handling. Gypsum-based compounds made with different additions of redispersible polymers were studied, such as: ethylene-vinyl acetate (EVA), vinyl acetate terpolym
Mat. Res.. Publicado em: 25/04/2019
-
19. Gypsum application, soil fertility and cotton root growth
ABSTRACT Since there is no consensus on phosphogypsum (PG) rates to be used in agriculture, a better understanding of its effects on the soil solution is needed. Cotton root growth was evaluated as related to Al and Ca activity in soil solution affected by PG. The experiment was carried out in rhizotrons filled with30∙dm–3 of soil. PG rates were estimate
Bragantia. Publicado em: 11/04/2019
-
20. Recycled gypsum block: development and performance
Resumo O resíduo de gesso ainda é considerado um grave problema econômico e ambiental. Seu volume é alto e sua destinação é muitas vezes inadequada. Visando fornecer uma alternativa mitigatória, esta pesquisa pretende desenvolver blocos que incorporem o resíduo industrial de gesso a partir da logística reversa. Para isso foi realizado um processo d
Ambient. constr.. Publicado em: 2019-04
-
21. Utilization of gypsum from construction and demolition waste in Portland cement mortar
Abstract Civil construction generates the largest amount of construction and demolition waste (CDW), most of which is not reused and is discarded as inert waste in landfills. The purpose of this study was to evaluate the feasibility of reusing gypsum recovered from CDW in the preparation of mortar. This material was examined to determine its specific mass, m
Cerâmica. Publicado em: 2019-01
-
22. Simulation of the mechanical process of gypsum cutting with picks
Abstract Several research works have been done to assess the effect of the cutting depth on the cutting forces when using picks. In this case, the cutting tests need im-portant equipment to cut rocks, to register the cutting force and to determine the cutting force value. The purpose of this research work is to simulate the laboratory rock cutting tests to d
REM, Int. Eng. J.. Publicado em: 2018-07
-
23. Stratigraphic Relations of the Ipubi Formation: Siliciclastic-Evaporitic Succession of the Araripe Basin
ABSTRACT The Ipubi Formation represents the Aptian-Albian siliciclastic-evaporitic succession of Araripe Basin, NE Brazil. This succession comprises siliciclastic rocks (bituminous shales and claystones) and evaporites (gypsum and secondary anhydrite) and represents part of the lacustrine-shallow marine post-rift phase I. This study used sequence stratigraph
An. Acad. Bras. Ciênc.. Publicado em: 25/06/2018
-
24. COMPARISON OF RESPONSE SURFACE METHODOLOGY (RSM) AND ARTIFICIAL NEURAL NETWORKS (ANN) TOWARDS EFFICIENT OPTIMIZATION OF FLEXURAL PROPERTIES OF GYPSUM-BONDED FIBERBOARDS
ABSTRACT In this study, the hydration behavior of gypsum paste mixed with bagasse and kenaf fibers as lignocellulosic material and fiberglass as inorganic material is evaluated. Moreover, the properties of gypsum-bonded fiberboard (GBFB) are examined using bagasse fibers (Saccharum officinarum.L), kenaf fibers (Hibiscus cannabinus.L) and industrial fiberglas
CERNE. Publicado em: 2018-03