Glass Transition Temperature
Mostrando 1-12 de 183 artigos, teses e dissertações.
-
1. Glass transition and sorption properties of Köftür: a dehydrated fruit-based product
Abstract This study was conducted to determine the glass transition temperature (Tg) using Differential Scanning Calorimetry (DSC) and sorption characteristics of köftür, a dehydrated fruit-based product. Tg of was found to be 24.5 °C ± 0.30. Sorption isotherms were determined at 5, 15 and 25 °C using nine different salt solutions. The data were then ap
Food Sci. Technol. Publicado em: 2020-12
-
2. Glass Formation of Null-Matrix Cu-Hf-(Zr, Ti) Alloys
An approach following the null-matrix, Ti/Zr ratio of 2.08, for neutron diffraction was used to calculate the glass formation in Cu-Ti-(Hf,Zr) alloys. The Cu55Zr14.6Ti30.4, Cu61.48Hf18.52Zr6.48Ti13.52, Cu58.1Hf16.9Zr8.1Ti16.9 and Cu52.46Hf14.2Zr10.8Ti22.54 compositions (at. %), were calculated and prepared by argon arc melting. Copper die suction casting was
Mat. Res.. Publicado em: 13/01/2020
-
3. Antimicrobial zein coatings plasticized with garlic and thyme essential oils
Resumo Óleos essenciais com propriedades antimicrobianas são amplamente utilizados na indústria de alimentos. Neste estudo, objetivou-se avaliar a influência da mistura de óleos essenciais de alho (Allium sativum) e tomilho (Thymus vulgaris) nas propriedades antimicrobianas e mecânicas de filmes de zeína. Quatro bactérias (Escherichia coli enteropato
Braz. J. Food Technol.. Publicado em: 28/11/2019
-
4. Evaluation of Dynamic Mechanical Properties of Fique Fabric/Epoxy Composites
The fique is a plant typical of the Colombian Andes, from which relatively common items are fabricated. One of these is woven fabric extensively applied in sackcloths. The mechanical strength of fique fabric have motivated recent investigations on possible reinforcement of polymer matrix composites. For this purpose its thermo-mechanical behavior was unveile
Mat. Res.. Publicado em: 14/10/2019
-
5. Avaliação da utilização da pós cura nas propriedades térmicas e mecânicas de um sistema epóxi de cura à temperatura ambiente
RESUMO Neste trabalho, uma resina epóxi de cura a temperatura ambiente foi submetida a ciclos térmicos de pós cura para verificar as alterações nas propriedades térmicas e mecânicas finais do material. As amostras foram obtidas por vazamento em molde metálico e os ciclos de pós cura foram realizados a 75°C, 90°C, 110°C por uma hora e um ciclo de
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Cellulose Nanocrystals and Jute Fiber-reinforced Natural Rubber Composites: Cure Characteristics and Mechanical Properties
A comparative study was conducted for three natural rubber (NR) composites: one containing raw jute fibers, one containing bleached jute fibers, and one containing cellulose nanocrystals (CNCs). The composites were prepared by adding each filler at 5 or 10 phr to the latex before chemical coagulation, and the composites were processed in a two-roll mixing mi
Mat. Res.. Publicado em: 26/08/2019
-
7. Ascorbic acid encapsulation in a glassy carbohydrate matrix via hot melt extrusion: Preparation and characterization
Abstract Hot melt extrusion technology using a twin-screw extruder was employed to obtain maltodextrin, maltodextrin-gum arabic and maltodextrin-trehalose based glassy extrudates containing ascorbic acid (dispersed phase). Ascorbic acid payload of all three formulations was more than 15.67 g/100 g extrudates while the ascorbic acid yield was above 97%. The g
Food Sci. Technol. Publicado em: 16/05/2019
-
8. Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites
This work highlights the relationship between the preparation, crystallization behavior, microstructures, and mechanical properties of Cu-based bulk metallic glasses (BMGs) and their composites (BMGCs). (Cu47Zr45Al8)97.5Y1.5Nb in-situ BMGCs were prepared using isothermal annealing, and the experimental results indicate tunable mechanical properties of the al
Mat. Res.. Publicado em: 06/05/2019
-
9. Physicomechanical and thermal analysis of bulk-fill and conventional composites
Abstract The aim of this study was to evaluate the degree of conversion (DC) and the thermal stability of bulk-fill and conventional composite resins. Eleven composite resin samples were prepared to evaluate the DC, Vickers microhardness (VMH), mass and residue/particle loss, glass transition temperature (Tg), enthalpy, and linear coefficient of thermal expa
Braz. oral res.. Publicado em: 18/03/2019
-
10. Consolidation of Fe-Based Metallic Glass Powders by Hot Pressing
An alternative route to obtain bulk metallic glasses is by consolidation of metallic glass powders by deforming these materials in the temperature interval between the crystallization temperature and the glass transition temperature, where the material flows with a reduced viscosity. In the present work, bulk parts of the Fe43.2Co28.8B19.2Si4.8Nb4 alloy were
Mat. Res.. Publicado em: 17/01/2019
-
11. Evaluation of Fracture Toughness of Ultraviolet-Irradiated Polycarbonate Using the Essential Work of Fracture Method
The essential work of fracture (EWF) method provides useful parameters to characterize the fracture toughness of polymers exposed to degrading environments under conditions associated with plane-stress state of failure. Exposure of polymeric engineering materials to ultraviolet (UV) radiation may produce macromolecular changes that impair their fracture toug
Mat. Res.. Publicado em: 26/07/2018
-
12. Microscopía fototérmica para el estudio de transformaciones de fase
ABSTRACT A novel system allowing a high spatial resolution mapping of the thermal diffusivity as a function of temperature up to 1800 K is presented. The system is based on a photothermal technique recently developed by the group, consisting in measuring, with a probe laser beam, the curvature induced by local heating with a modulated pump laser. A microscop
Matéria (Rio J.). Publicado em: 19/07/2018