Glass Beads
Mostrando 1-12 de 160 artigos, teses e dissertações.
-
1. Dynamics of the seasonal airborne propagation of Staphylococcus aureus in academic dental clinics
Abstract Objective Staphylococcus aureus strains can be disseminated during dental treatments and occasionally lead to the contamination and infection of patients and dentists, which is an important public health problem. The dynamics of the airborne propagation and the genetic diversity of S. aureus isolated in an academic dental clinic environment were in
J. Appl. Oral Sci.. Publicado em: 05/04/2018
-
2. Analysis of Styrene Polymerization Without Surfactant and N2 Gas in Cylindrical Flask.
The conditions of chemical synthesis can be crucial for polymerization of styrene in such a way that it can be produced latex beads at nanometric range (ϕ < 400nm). In this work, it will be analyzed how the absence of N2 and surfactant will result in colloidal particles with high affinity to agglomerate forming two kinds of nanostructured assemblies: colloi
Mat. Res.. Publicado em: 22/01/2018
-
3. Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/CAM composite materials and the bond strength of resin cements
ABSTRACT Objective The study aimed to evaluate effects of air abrasion with alumina or glass beads on bond strengths of resin cements to CAD/CAM composite materials. Material and Methods CAD/CAM composite block materials [Cerasmart (CS) and Block HC (BHC)] were pretreated as follows: (a) no treatment (None), (b) application of a ceramic primer (CP), (c)
J. Appl. Oral Sci.. Publicado em: 2015-12
-
4. SOLID HOLDUP AND CIRCULATION RATE IN A LIQUID-SOLID CIRCULATING FLUIDIZED BED WITH VISCOUS LIQUID MEDIUM
Abstract Experiments were conducted in a liquid-solid circulating fluidized bed with different viscous liquids and particles to study the hydrodynamics, average solid hold up and solid circulation rate. The effects of operating parameters, i.e., primary liquid flow rate in the riser, auxiliary liquid flow rate, total liquid flow rate and viscosity of the liq
Braz. J. Chem. Eng.. Publicado em: 2015-12
-
5. Improving adhesion between luting cement and zirconia-based ceramic with an alternative surface treatment
This study evaluated the influence of an alternative surface treatment on the microshear bond strength (μsbs) of zirconia-based ceramic. Thirty-five zirconia disks were assigned to five groups according to the following treatments: Control (CO), glass and silane were not applied to the zirconia surface; G1, air blasted with 100μm glass beads + glaze + sila
Braz. oral res.. Publicado em: 31/03/2015
-
6. Flow Injection Analysis System for Screening Organophosphorus Pesticides by their Inhibitory Effect on the Enzyme Acethylcholinesterase
A flow-injection spectrophotometric procedure was developed for screening organophosphorus pesticides. The method is based on the inhibition of acetylcholinesterase immobilized on controlled porous glass beads with acetylcholine chloride as the substrate. Methyl parathion, chlorpyrifos, malathion and dichlorvos have been tested. The analytical peak height fo
J. Braz. Chem. Soc.. Publicado em: 2015-03
-
7. Polymerase chain reaction (PCR) identification of terverticillate Penicillium species isolated from agricultural soils in eskişehir province
In the present study, nine terverticillate Penicillium isolates (P. griseofulfum, P. puberulum, P. crustosum, P. aurantiogriseum, P. chrysogenum, P. primulinum, P. expansum, P. viridicatum, Eupenicillium egyptiacum) from 56 soil samples were characterized genetically by a PCR method. The DNAs of the strains were isolated using the glass beads and vortexing e
Braz. arch. biol. technol.. Publicado em: 25/10/2013
-
8. Scanning Electron Microscopic study of Piper betle L. leaves extract effect against Streptococcus mutans ATCC 25175
INTRODUCTION: Previous studies have shown that Piper betle L. leaves extract inhibits the adherence of Streptococcus mutans to glass surface, suggesting its potential role in controlling dental plaque development. OBJECTIVES: In this study, the effect of the Piper betle L. extract towards S. mutans (with/without sucrose) using scanning electron microscopy (S
Journal of Applied Oral Science. Publicado em: 2011-04
-
9. CHARACTERIZATION OF MATERIALS TO ENSURE THE CONDUCTIVITY OF HYDRAULICALLY INDUCED FRACTURES IN OIL WELLS AND GAS / CARACTERIZAÇÃO DE MATERIAIS PARA GARANTIR A CONDUTIVIDADE DE FRATURAS HIDRAULICAMENTE INDUZIDAS EM POÇOS DE PETRÓLEO E GÁS
Materials used as propant in hydraulic fracturing to improve production in oil wells must present properties that promote machanical stability of the fracture and sustain the flow of fluid from the reservoir through the fracture filled with the propant material. Due to diferent service conditions found in oil reservoirs, materials with different group of pro
Publicado em: 2010
-
10. Remoção de alquilbenzeno linear sulfonado (LAS) e caracterização microbiana em reator anaeróbio de leito fluidificado / Removal of linear alkylbenzene sulfonate (LAS) and microbial characterization in anaerobic fluidized bed reactor
Nesse trabalho foi estudado a degradação anaeróbia do alquilbenzeno linear sulfonado (LAS), um surfactante amplamente utilizado na fabricação de detergentes e presente em esgoto doméstico e águas residuárias industriais. Para isso foi utilizado reator anaeróbio de leito fluidificado em escala de bancada (1,2 L) preenchido com material suporte para i
Publicado em: 2010
-
11. Secagem de biomassa de levedura (Saccharomyces cerevisiae) em um secador atmosferico condutivo com agitação mecanica : caracterização e avaliação do produto seco como bioadsorvente e complemento nutricional / Drying of yeast biomass (Saccharomyces cerevisiae) in a mechanically shaken conductive atmospheric dryer : characterization and evaluation of the dry material as bioadsorbent and nutritional complement
This thesis allowed evaluating the conductive atmospheric dryer with mechanical agitation, using glass beads as inert particles for drying a residue from brewery (yeast of Saccharomyces cerevisiae species) after being used eight times. The dryer was operated with the sediment load of yeast (150 g and 300 g), heating surface temperature (60 ºC and 90 ºC) an
Publicado em: 2010
-
12. Glass bead transformation method for gram-positive bacteria
A simple, inexpensive and reproducible transformation method was developed for Gram-positive bacteria. It was based on agitation of bacterial protoplasts with glass beads in the presence of DNA and polyethylene glycol. By using this method, introduction of pGK12 into protoplasts of several strains of Gram-positive bacteria was achieved.
Brazilian Journal of Microbiology. Publicado em: 2009-12