Friction Evaluation
Mostrando 1-12 de 49 artigos, teses e dissertações.
-
1. Mechanical behavior of PVD coatings deposited on ADI
ABSTRACT In this work, the mechanical behavior of the coated ADI system is studied. For this purpose, single layer Ti and bilayer Ti/TiN and TiAl/TiAlN coatings, with different thicknesses, were deposited by the PVD technique of cathodic arc deposition on high strength ADI substrates using industrial and experimental devices. The characterization of the coat
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Avaliação tribológica de óleos hidráulicos biodegradável e mineral com deslizamento entre as ligas de Cu-Zn e WC-CoCr
RESUMO A correta seleção dos óleos lubrificantes e das superfícies de contato melhoram o desempenho e reduzem o consumo de energia das máquinas Por isso, a engenharia de superfícies propõe novos revestimentos aos quais seu comportamento tribológico combinado com o uso de óleos biodegradáveis em componentes de sistema hidráulicos, não são conheci
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Estudo comparativo do tingimento de malha PES/CO com água tratada com resíduo de clarificação de óleo vegetal, na forma natural e calcinada
RESUMO A indústria têxtil utiliza um grande volume de água, o que torna necessário encontrar opções mais sustentáveis para o seu uso, como a reutilização em novos tingimentos. O uso de um resíduo industrial sólido, como adsorvente, poderá ser uma alternativa para tratar o efluente têxtil. Este estudo teve como objetivo testar a viabilidade do re
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Modeling and hydraulic performance evaluation of a dripper device coupled to a branched water distribution network
Resumo A irrigação é responsável por aproximadamente 70% do consumo de água doce do mundo e é um dos principais fatores por trás da crescente escassez de água global. As técnicas e sistemas de irrigação são extremamente diferenciadas e complexas. Neste contexto, as ferramentas de dinâmica de fluidos computacional (CFD) ganham relevância, permit
Rev. Ambient. Água. Publicado em: 03/06/2019
-
6. Evaluation of the energy extraction of a small-scale wave energy converter
RESUMO Este trabalho tem foco em propostas que podem incentivar o desenvolvimento de dispositivos integrados de pequena escala para atender o desafio global de fornecer energia elétrica a partir de fontes alternativas sem maiores intervenções. O artigo apresenta a avaliação de um dispositivo de extração de energia das ondas em pequena escala que pode
RBRH. Publicado em: 04/04/2019
-
7. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
8. Effects of Aging at 450°C on the Pitting Corrosion Resistance and Toughness of AISI 317L Steel Welded by GTAW and FSW
Austenitic stainless steels are high corrosion resistant alloys widely used in many industrial fields. Among this family of steels, AISI 317L stands out due to its higher localized corrosion resistance when compared to the traditional grades AISI 304L and AISI 316L. In some applications in oil refineries, the AISI 317L is being specified for services at mode
Mat. Res.. Publicado em: 17/11/2017
-
9. Entropy Generation Minimization Analysis of Active Magnetic Regenerators
Abstract A performance assessment of active magnetocaloric regenerators using entropy generation minimization is presented. The model consists of the Brinkman-Forchheimer equation to describe the fluid flow and coupled energy equations for the fluid and solid phases. Entropy generation contributions due to axial heat conduction, fluid friction and interstiti
An. Acad. Bras. Ciênc.. Publicado em: 2017-05
-
10. Soldabilidad de Polietileno de Alta Densidad Usando Soldadura por Fricción-agitación con una Herramienta de Hombro no Rotacional
Abstract: In this work was studied the weldability of high density polyethylene (HDPE) using friction stir welding (FSW) process, and two kind of tools, denominated conventional, and non-conventional tool, which has a non-rotating shoulder. Evaluation was performed using combination of parameters of rotation speed (vW) and welding speed (vA), which were adju
Soldag. insp.. Publicado em: 2016-12
-
11. Friction stir welding of duplex and superduplex stainless steels and some aspects of microstructural characterization and mechanical performance
Friction stir welding was used to produce butt joints on 6 mm thick plates of UNS S32101 lean duplex stainless steel, S32205 duplex stainless steel, and S32750 and S32760 superduplex stainless steels. Fully consolidated joints were achieved, with full penetration, using heat input of 1.37-1.50 kJ/mm. Specimens submitted to tensile testing performed perpendic
Mat. Res.. Publicado em: 12/02/2016
-
12. Micro and nanometric wear evaluation of metal discs used on determination of biodiesel fuel lubricity
The contact of diesel fuel with engine subsystems demands a good wear resistance. Lubricity is an important feature for integrity of injection system and the sulphur composites are primarily responsible for lubrication of the injector nozzle. Biodiesel is responsible for partially restoring the lubricity of diesel fuel that presents low levels of sulphur com
Mat. Res.. Publicado em: 04/07/2014