Fracture Work
Mostrando 13-24 de 249 artigos, teses e dissertações.
-
13. New material perspective for endocrown restorations: effects on mechanical performance and fracture behavior
Abstract The aim of this study was to investigate the mechanical performance and the fracture behavior of endocrown restorations prepared using distinct restorative materials. A total of 42 sound molars with similar crown size and shape were cut at 2 mm above the cementoenamel junction and endodontically treated. They were categorized according to the restor
Braz. oral res.. Publicado em: 11/02/2019
-
14. Weibull analysis of tensile tested piassava fibers with different diameters
ABSTRACT Environmental considerations in addition to technical, economical and societal benefits are increasingly promoting the substitution of natural fibers for glass fiber in polymer matrix composites. However, natural fibers are heterogeneous in their dimensions, specially the cross section, which plays an important role in their mechanical strength. It
Matéria (Rio J.). Publicado em: 06/12/2018
-
15. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
16. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
17. Nickel-Titanium Alloys Welding of Thin Sheets Using GTAW: Comparative Study Between Similar and Dissimilar Welding with AISI 304 Stainless Steel
The objective of the present work was to evaluate welding of thin sheets (thickness < 1 mm) of similar and dissimilar NiTi alloys with AISI 304 stainless steel using the Gas Tungsten Arc Welding (GTAW) process and to study the mechanical and metallurgical properties of the joints with and without post-welding heat treatment (PWHT). The GTAW process was chose
Mat. Res.. Publicado em: 08/11/2018
-
18. Effects of Amount of Glass Fiber Laminate Skins in Sandwich Composite of Filled Core
The purpose of this work is the study of the mechanical behavior of two different sandwich composite in static and fatigue analysis of three-point bending, using different amount of glass fiber laminated as skins, remaining with same total thickness. The specimens are composed of glass fiber cloth and epoxy resin. The static tests provided the mechanical pro
Mat. Res.. Publicado em: 29/10/2018
-
19. Evaluation of Fracture Toughness of Ultraviolet-Irradiated Polycarbonate Using the Essential Work of Fracture Method
The essential work of fracture (EWF) method provides useful parameters to characterize the fracture toughness of polymers exposed to degrading environments under conditions associated with plane-stress state of failure. Exposure of polymeric engineering materials to ultraviolet (UV) radiation may produce macromolecular changes that impair their fracture toug
Mat. Res.. Publicado em: 26/07/2018
-
20. Determinación de la tenacidad a la fractura J en laminados fibra-metal del tipo CARALL con láminas de aluminio 6061 y 1050
ABSTRACT Determination of fracture toughness in hybrid composites, fiber-metal laminates, FML (Fiber Metal Laminates) is very important to perform an analysis of structural integrity to estimate damage tolerance and residual strength of the material against the propagation of a crack This evaluation should be done in both naval and aircraft structures using
Matéria (Rio J.). Publicado em: 19/07/2018
-
21. Metodología ad hoc para la observación de superficies de desgaste y fractura
ABSTRACT In the present work, a methodology of microscopic analysis and measurement of wear surfaces is presented, based on images made using digital processing techniques such as stitching and stac-king. The images are obtained from an ad-hoc and low-cost microscopic observation system, consisting of sample positioning and focus-elevation modules with micro
Matéria (Rio J.). Publicado em: 19/07/2018
-
22. Estabilidad térmica de aleaciones de magnesio Procesadas por Friccion-Agitación (FSP)
ABSTRACT Superplasticity is defined by an extended plastic deformation previous to fracture, generally at high temperatures. In the mode of fine structures superplasticity, grain boundary sliding is the controlling mechanism. To achieve this fine grained structure it could be used any Severe Plastic Deformation (SPD) process like Friction Stir Processing (FS
Matéria (Rio J.). Publicado em: 19/07/2018
-
23. Caracterización de daño por “b-value” de eventos de emisión acústica en ensayos de rotura de roca andesita
ABSTRACT Acoustic emission is a phenomenon that produces elastic waves when materials are subjected to tension. These waves spread towards the material surface where they are received by sensors that convert them into electrical signals for further analysis. In this work, acoustic emission signals were analysed in order to evaluate the amount of accumulated
Matéria (Rio J.). Publicado em: 19/07/2018
-
24. Obtención de aceros de baja aleación con diferentes contenidos de Ni y similares microestructuras y propiedades mecánicas
ABSTRACT Low alloy steels are used in many applications in the oil and gas industry. The addition of Ni in these steels improves their low temperature fracture toughness and hardenability, with a low penalty on weldability. However, ISO 15156-2 standard restricts Ni content up to a 1 wt% limit, requiring additional and expensive tests if higher Ni steels are
Matéria (Rio J.). Publicado em: 19/07/2018