Fracture Behavior
Mostrando 1-12 de 181 artigos, teses e dissertações.
-
1. FEM-DEM simulation of Uniaxial Compressive Strength (UCS) laboratory tests
Abstract Finite/discrete element methods (FDEM) are hybrid numerical models that use algorithms to analyze the transition from continuous to discontinuous. This type of formulation allows modeling physical laboratory tests with greater proximity to reality. This article proposes to simulate the average behavior of a uniaxial compression test campaign. The te
REM, Int. Eng. J.. Publicado em: 2020-12
-
2. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Predictive Factors of Death after Surgery for Treatment of Proximal Femoral Fracture
Resumo Objetivo Avaliar fatores preditivos de morte em pacientes de idade igual ou superior a 70 anos com fratura proximal do fêmur submetidos a tratamento cirúrgico. Métodos Análise de prontuários médicos criando-se uma coorte retrospectiva com seguimento de 6meses. Foramanalisados 124 prontuários após aplicação dos critérios de inclusão e e
Rev. bras. ortop.. Publicado em: 07/10/2019
-
4. Aço de alta dureza para aplicação balística: propriedades mecânicas
RESUMO Blindagens balísticas são projetadas a resistir determinadas ameaças, que dependem da aplicação. Estas ameaças podem ser geradas por projéteis de armas de fogo ou estilhaços provenientes de explosões com diferentes energias cinéticas. Os materiais normalmente utilizados para este propósito são metálicos, não metálicos e compósitos, sen
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Biomechanical development and evaluation of a new framework for all-on-four rehabilitation
Resumo Introdução Para reabilitação de mandíbulas totalmente edêntulas, a opção por carga imediata determina a utilização de próteses provisórias que esplintem os implantes instalados. Apesar de provisórias com reforço proverem as reabilitações com benefícios biomecânicos, a não adoção desta indicação coexiste em diferentes estudos so
Rev. odontol. UNESP. Publicado em: 29/07/2019
-
6. Fatigue survival and damage modes of lithium disilicate and resin nanoceramic crowns
Abstract Polymer-based composite materials have been proposed as an alternative for single unit restorations, due to their resilient and shock absorbing behavior, in contrast to the brittleness of ceramic materials that could result in failure by fracture. Objective: To evaluate the fatigue strength and damage modes of monolithic posterior resin nanoceramic
J. Appl. Oral Sci.. Publicado em: 30/05/2019
-
7. Oxidation Behavior of Al-Y Coating on γ-TiAl at 900°C
ABSTRACT In this study, an Al-Y coating was applied to enhance the property of oxidation resistance on the surface of γ-TiAl alloys by rf magnetron sputtering. The isothermal oxidation tests were investigated at 900 °C for 100 h. The coating characteristics and microstructure of coating after isothermal oxidation were inspected by XRD and SEM methods respe
Matéria (Rio J.). Publicado em: 20/05/2019
-
8. Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites
This work highlights the relationship between the preparation, crystallization behavior, microstructures, and mechanical properties of Cu-based bulk metallic glasses (BMGs) and their composites (BMGCs). (Cu47Zr45Al8)97.5Y1.5Nb in-situ BMGCs were prepared using isothermal annealing, and the experimental results indicate tunable mechanical properties of the al
Mat. Res.. Publicado em: 06/05/2019
-
9. Effect of RAP content on flexural behavior and fracture toughness of flexible pavement
Abstract The use of recycled Reclaimed Asphalt Pavement (RAP) material into flexible pavement contributes to sustainable development with environmental and economic benefits. In the present work, Semi-Circular Bending (SCB) specimen has been adopted to study the flexural strength and mode-I fracture toughness of flexible pavement with and without RAP. Two di
Lat. Am. j. solids struct.. Publicado em: 21/03/2019
-
10. New material perspective for endocrown restorations: effects on mechanical performance and fracture behavior
Abstract The aim of this study was to investigate the mechanical performance and the fracture behavior of endocrown restorations prepared using distinct restorative materials. A total of 42 sound molars with similar crown size and shape were cut at 2 mm above the cementoenamel junction and endodontically treated. They were categorized according to the restor
Braz. oral res.. Publicado em: 11/02/2019
-
11. Análisis de los elementos principales en el diseño de placas de bloqueo en una fractura de 2-partes del cuello quirúrgico del húmero utilizando MEF y análisis estadístico
ABSTRACT A large number of proximal humerus fractures are being treated with osteosynthesis. However, loss of reduction remains a serious problem and it can cause screw cutout at the humeral joint and reoperation. According to the interfragmentary strain theory, one should be aware of the balance between a flexible fixation, which stimulates callus formation
Matéria (Rio J.). Publicado em: 06/12/2018
-
12. Nickel-Titanium Alloys Welding of Thin Sheets Using GTAW: Comparative Study Between Similar and Dissimilar Welding with AISI 304 Stainless Steel
The objective of the present work was to evaluate welding of thin sheets (thickness < 1 mm) of similar and dissimilar NiTi alloys with AISI 304 stainless steel using the Gas Tungsten Arc Welding (GTAW) process and to study the mechanical and metallurgical properties of the joints with and without post-welding heat treatment (PWHT). The GTAW process was chose
Mat. Res.. Publicado em: 08/11/2018