Fourier Transform Mid Infrared Spectroscopy
Mostrando 1-12 de 14 artigos, teses e dissertações.
-
1. QUANTITATIVE SPECIATION OF THE LIQUID PHASE BY FTIR SPECTROSCOPY IN THE SYSTEM AMP-PZ-CO2-H2O
This work reports a multivariate calibration partial least square regression (PLS) model to quantify the liquid-phase concentrations of 2-amino-2-methyl-1-propanol (AMP), piperazine (PZ), bicarbonate, PZ monocarbamate, and PZ dicarbamate during the absorption/desorption process by Fourier Transform Mid-Infrared spectroscopy (mid-FTIR). The model could predic
Química Nova. Publicado em: 2022
-
2. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
3. Estimation of elemental composition of agricultural soils from West Azerbaijan, Iran, using mid-infrared spectral models
RESUMO A caracterização da composição elementar fornece informações úteis para caracterizar o grau de alteração dos solos. Em Miandoab, norte do Irã, esta caracterização não existe. Os objetivos deste trabalho foram avaliar o grau de intemperismo dos solos típicos da região usando a sua composição elementar e estimar esta composição usando
Rev. bras. eng. agríc. ambient.. Publicado em: 01/07/2019
-
4. FT-IR methodology (transmission and UATR) to quantify automotive systems
Abstract When using Fourier transform infrared spectroscopy (FT-IR) under the qualitative aspect for characterization of polymer blends, often a simple identification of each one of the existing polymers in the blend does not justify the material failure since different amounts of each component may result in different mechanical properties, which should be
Polímeros. Publicado em: 15/03/2018
-
5. In vitro effects of alcohol-containing mouthwashes on human enamel and restorative materials
Abstract The objective of this study was to evaluate the in vitro effects, including surface morphological characteristics and chemical elemental properties, of different mouthwash formulations on enamel and dental restorative materials, simulating up to 6 months of daily use. Human enamel samples, hydroxyapatite, composite resin, and ceramic surfaces were e
Braz. oral res.. Publicado em: 15/03/2018
-
6. AVALIAÇÃO DE FRAGMENTOS DE LENHOS CARBONIZADOS DE ARAUCARIACEAE POR MEIO DE TERMOGRAVIMETRIA E INFRAVERMELHO ASSOCIADAS À ANÁLISE MULTIVARIADA
The aim of the study is to evaluate the physical and chemical changes that occur on wood fragments submitted to different temperatures, verifying their influence on significant chemical characteristics in the forming process. Carbonization process in muffle associated to the techniques of Thermogravimetry, Fourier Transform Infrared Spectroscopy (FTIR) and m
Quím. Nova. Publicado em: 2017-09
-
7. Methodologies for Characterization of Aerospace Polymers/Energetic Materials – a Short Review
ABSTRACT Fourier transform infrared spectroscopy techniques, associated or not to others, are a well-studied subject used for characterizing polymers/energetic materials that have been employed mainly in aerospace industries. However, the infrared analyses are usually qualitative and performed using the mid-infrared. This paper discusses the Fourier transfor
J. Aerosp. Technol. Manag.. Publicado em: 2016-03
-
8. Preliminary data on Brazilian monofloral honey from the northeast region using FT-IR ATR spectroscopic, palynological, and color analysis
Fourier transform infrared attenuated total reflectance (FT-IR ATR) spectroscopy was used to determine 14 different measurands in northeast Brazilian honey samples. Nine different honey samples (six monofloral and three polyfloral) from 2009 obtained from the company CEARAPI underwent FT-IR ATR, palynological, color, and sensorial analysis to obtain prelimin
Quím. Nova. Publicado em: 2014
-
9. Acoplamento de técnicas espectrométricas com métodos quimiométricos de classificação e calibração multivariada em alimentos / Coupling spectrometric techniques with chemometric methods for classification and multivariate calibration in food
This research work describes three studies of chemometric methods employed for the classification and characterization of edible oils and its quality parameters through Fourier Transform mid infrared spectroscopy and near infrared spectroscopy, and for the monitoring the oxidative stability and quality of yogurt using fluorescence spectroscopy . The first an
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/05/2011
-
10. Three-band quantum well infrared photodetector using interband and intersubband transitions.
This thesis presents the modeling, design, fabrication and characterization of a quantum well infrared photodetector (QWIP) capable of detecting near infrared (NIR), mid wavelength infrared (MWIR) and long wavelength infrared (LWIR), simultaneously. The NIR detection was achieved using interband transition while MWIR and LWIR were based on intersubband trans
Publicado em: 2008
-
11. Analises de mel e propolis utilizando metodos quimiometricos de classificação e calibração / Propolis and honey analysis using calibration and crustering chemometric methods
This research work describes four studies of chemometrical methods employed for the characterisation of honey and propolis. In the first study honey quality parameters, that is, acidity, humidity, and reducing sugars, were measured with the aid of mid-infrared spectroscopy by attenuated total reflectance and partial least squares multivariate calibration. Th
Publicado em: 2006
-
12. Determination of the HMX and RDX content in synthesized energetic material by HPLC, FT-MIR, and FT-NIR spectroscopies
A new method has been developed for determining the content of mixtures of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), the HMX/RDX ratio, in explosive compositions by Fourier transform infrared spectroscopy (FT-IR), in the regions MIR (mid infrared) and NIR (near infrared) with reference values ob
Química Nova. Publicado em: 2004-08