Fluid Flow Devices
Mostrando 1-12 de 21 artigos, teses e dissertações.
-
1. COMPUTATIONAL ANALYSIS OF LOAD VENTILATION IN BROILER TRANSPORT
ABSTRACT The characterization of ventilation during the transport of broiler chickens is essential for identifying and characterizing the potential problems of a convective heat flow and its effects on the welfare and the health and production conditions of the chickens. The objective of this study was to evaluate the ventilation patterns in two layout model
Eng. Agríc.. Publicado em: 2021-02
-
2. Numerical study of upstream disturbances on the performance of electromagnetic and ultrasonic flowmeters
ABSTRACT Electromagnetic and ultrasonic flowmeters are high precision devices that can measure the water flow in pressurized irrigation networks. In these networks, the inadequate installation distance of flow control valves generates upstream disturbances which will increase measurement errors and reduce the accuracy of the equipment. Therefore, estimating
Sci. agric. (Piracicaba, Braz.). Publicado em: 04/11/2019
-
3. Simulação computacional de dispositivos de mistura em câmara de combustão para gases de carbonização
Resumo O carvão vegetal proveniente de florestas plantadas é uma fonte de energia renovável utilizada na siderurgia do Brasil, todavia, em sua produção há liberação do gás de pirólise, que pode ser considerado um gás com baixo poder calorífico inferior. A sustentabilidade da produção de carvão vegetal tem demandado a queima destes gases, poden
Ciênc. Florest.. Publicado em: 30/09/2019
-
4. Design and analysis of different models of microfluidic devices evaluated in Enhanced Oil Recovery (EOR) assays
ABSTRACT Microfluidic devices are a new platform for Enhanced Oil Recovery (EOR) assays. The application of Colloidad Dispersion Gels (CDG) injection method has been proposed in recent years. However, the mechanism of oil recovery enhancement has not been completely elucidated. Its purpose is to mobilize oil by decreasing the permeability of channeled zones.
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Experimentação física do escoamento gás-líquido em uma coluna de bolhas retangular utilizando a técnica PIV e a técnica de sombras SHADOW / Gas- liquid experimentation in a rectangular bubble column using PIV and Shadow techniques
Bubble columns are multiphase contact devices for mass and heat transfer, wich are intensively used in different industrial areas. Flow and turbulence in these equipments are induced by the bubble rise motion. The hydrodynamics and bubble behavior in a homogeneous bubbly flow regime was analyzed in a rectangular laboratory-scale bubble column (50 x 20 x 220
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/07/2012
-
6. Projeto de dispositivos de microcanais utilizando o método de otimização topológica. / Design of microchannel devices applying the topology optimization method.
Este trabalho propõe o estudo do projeto de dispositivos baseados em microcanais de fluido, tais como difusores, misturadores, válvulas, e trocadores de calor, através da aplicação do Método de Otimização Topológica (MOT). O MOT é um método computacional que permite obter um projeto otimizado de um sistema, através da distribuição de uma quanti
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/10/2010
-
7. A low cost piezoelectric valve-less diaphragm pump. / Desenvolvimento de uma bomba de fluxo piezelétrica de diafragma.
Flow pumps act as important devices in areas as Bioengineering, Medicine, Pharmacy, among other areas of Engineering. Principles for pumping fluids based on piezoelectric actuators have been studied in the Department of Mechatronic and Mechanical Engineering of Escola Politécnica da Universidade de São Paulo, that allow the construction of small flow pumps
Publicado em: 2009
-
8. Sistemas de análises químicas em fluxo explorando multi-impulsão, interface única ou quimiometria / Flow systems exploiting multi-pumping, single interface or chemometry
Multi-pumping flow systems (MPFS) present as an unique feature the use of solenoid pumps as fluid propelling devices, which deliver pulsed flows. This flow regime was evaluated in order to improve mixing conditions between the involved solutions, heating transfer and gas diffusion.The association of the chemometric methods of analysis and MPFS systems was de
Publicado em: 2009
-
9. Desenvolvimento e otimização de misturador estatico com o uso da fluidinamica computacional (C.F.D.) / Development and optimization of a statistic mixer with the use of computational fluid dynamics (C.F.D.)
On conventional mixing processes, a shaft rotates one or more impellers in a fluid generally inside a process vessel. The mixing processes that use static mixers on tube fluid flow are an option to conventional processes which application and interest is continuously growing, minimizing the use of equipment industrial devices. However its application is rest
Publicado em: 2008
-
10. Numerical analysis of thermal and electrohydrodynamic effects in travelling-wave dielectrophoretic devices
Travelling-wave dielectrophoretic phenomena involving cell detection and manipulation are very interesting for biomedical and biotechnological applications. However, electrohydrodynamic phenomena may interfere with the action of dielectrophoresis. The main goal of our study is to calculate the interplay of these effects. In so doing, we have been able to go
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2007-12
-
11. Otimização dos processos de separação em hidrociclones filtrantes
Filtering Hydrocyclones are devices used to solid-liquid separation and they have porous cones. Thus, during the operation these devices, besides the traditional streams (underflow and overflow), there is still an additional liquid stream from the filtration on conical area. The study and optimization of the filtering hydrocyclones were proposed in this work
Publicado em: 2006
-
12. "Sistemas de análises químicas em fluxo explorando multi-impulsão e detecção espectrofotométrica: aplicação a formulações farmacêuticas e a extratos de solos" / Multi-pumping flow systems with spectrophotometric detection: application to analysis of pharmaceuticals and soil extracts
Multi-pumping flow systems (MP) utilize solenoid pumps as fluid propelling devices, which deliver pulsed flows. This feature was evaluated in relation to the design, operation and performance of the system, to the mixing conditions, and to the dispersion of the introduced solution. The general evaluation of the MP systems involved investigations about precis
Publicado em: 2006