Fluid Bed
Mostrando 1-12 de 131 artigos, teses e dissertações.
-
1. Biomimetic Coating of Mechanochemically Synthesized Zirconium Titanate
A biomimetic method was used to promote bioactivity of ZrTiO4. Zirconium titanate was obtained by using a combination of techniques such as mechanical milling and heat treatment of zirconia and titania powders. The effect of milling time on the evolution of the ZrTiO4 phase formation was studied. Powders were uniaxially pressed followed by heat treatment for
Mat. Res.. Publicado em: 10/07/2019
-
2. Two-dimensional Boussinesq equations applied to channel flows: deducing and applying the equations
RESUMO Uma das hipóteses básicas adotada para a formulação teórica dos escoamentos de fluidos é a distribuição da pressão hidrostática na vertical. No entanto, muitos pesquisadores apontaram que essa simplificação pode levar a erros, em casos como o escoamento na ruptura de barragens. A discrepância entre a solução computacional e o experiment
RBRH. Publicado em: 25/04/2019
-
3. Mathematical modeling of manganese adsorption onto bone char in a continuous fixed bed column incorporating backmixing and shriking core approaches
Abstract The present study investigated the dynamics of manganese adsorption onto bone char in a continuous fixed bed column using a mathematical model that incorporates: (i) the backmixing model to describe the fluid flow through the bed and (ii) the shrinking core model to describe the kinetic and mass transfer phenomena within spherical adsorbent particle
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
4. Entropy Generation Minimization Analysis of Active Magnetic Regenerators
Abstract A performance assessment of active magnetocaloric regenerators using entropy generation minimization is presented. The model consists of the Brinkman-Forchheimer equation to describe the fluid flow and coupled energy equations for the fluid and solid phases. Entropy generation contributions due to axial heat conduction, fluid friction and interstiti
An. Acad. Bras. Ciênc.. Publicado em: 2017-05
-
5. Mathematical modeling of supercritical fluid extraction of oil from canola and sesame seeds
Mathematical modeling of supercritical fluid extraction of oil from canola and sesame seeds with a two-phase model was performed in this work. A model based on differential mass balance was used to correlate the experimental data. Different adsorption isotherm models (Henry, Freundlich and Brunauer, Emmet and Teller (BET)) were used to describe the equilibri
Braz. J. Chem. Eng.. Publicado em: 2013-03
-
6. Simulação trifásica por técnicas de CFD da combustão de carvão mineral em leito fluidizado circulante / Three-phase CFD simulation of coal combustion in a circulating fluidized bed reactor
A queima de carvão mineral em Leito Fluidizado Circulante (CFBC) tem interessado pesquisadores por várias décadas, tendo sido propostos inúmeros modelos matemáticos que visam descrever os complexos fenômenos de transferência de massa, energia e quantidade de movimento deste sistema gás-sólido. A fase sólida é uma mistura de materiais inertes, como
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/09/2012
-
7. Metodologia para aplicar LES ao craqueamento catalítico fluido em um reator riser industrial / Large eddy simulation application methodology to a fluid catalytic cracking industry reactor
The main objective of this thesis is to propose a methodology in how to apply Large Eddy Simulation (LES) on a unit of catalytic cracking. In order to achieve this, it was proposed an alternative way of constructing the computational mesh, by using quasi-uniform meshes. The proposed meshes were implemented to minimize the computational effort and procedure f
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/09/2012
-
8. Control of fluid dynamics regime in spouted bed wetting process using spectral analysis / Controle do regime fluidodinâmico estável durante o processo de umedecimento de inertes em leito de jorro utilizando análise espectral
A técnica do leito de jorro têm sido utilizada em diversos processos industriais e com maior ênfase nos setores químico, alimentício e farmacêutico, visto que apresenta como principais vantagens excelentes taxas de transferência de calor e massa. Contudo, tais características estão diretamente condicionadas à manutenção do regime de jorro estáve
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/08/2012
-
9. Estudo das características fluidodinâmicas de misturas da madeira de eucalipto e do caroço do fruto do tucumã com inerte visando aplicação em processos de termoconversão / Study of fluid dynamic characteristics of mixtures of eucalyptus wood and tucumã endocarp with inert for application in thermal conversion processes
Este trabalho tem por objetivo estudar o comportamento fluidodinâmico de misturas binárias entre as biomassas madeira de eucalipto (Eucalyptus grandis) e o caroço do fruto do tucumã (Astrocaryum aculeatum), e areia como inerte, visando à aplicação em processos de termoconversão que utilizam a tecnologia de leito fluidizado. Os experimentos foram real
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/07/2012
-
10. Avaliação fluidodinâmica do HDT em regime contracorrente com o uso da fluidodinâmica computacional - CFD / Computational fluid dynamics assessment of hydrotreating process in counter current operation
Processos comerciais de hidrotratamento (HDT) normalmente operam em regime de leito gotejante "Trickle bed" em concorrente com fluxos descendentes de gás e de líquido, sobre um leito de partículas de catalisador onde ocorrem as reações. É bem conhecido que a remoção de enxofre é fortemente inibida pelo efeito de adsorção competitiva de H2S nos sí
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/07/2012
-
11. Using fluid bed granulation to improve the dissolution of poorly water-soluble drugs
In this study, fluid bed granulation was applied to improve the dissolution of nimodipine and spironolactone, two very poorly water-soluble drugs. Granules were obtained with different amounts of sodium dodecyl sulfate and croscarmellose sodium and then compressed into tablets. The dissolution behavior of the tablets was studied by comparing their dissolutio
Brazilian Archives of Biology and Technology. Publicado em: 2012-06
-
12. Numerical prediction of bed-load and surface deformation on a granular bed sheared by a turbulent boundary-layer
The entrainment of solid particles by a fluid flow is frequently found in nature and in industry. A better knowledge of this is of importance to understand the physical nature of the phenomenon and to improve industrial processes. Bed-load occurs if the shear stresses exerted by the fluid on the granular bed are bounded to some limits: a mobile granular laye
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-03