Flow Laminar
Mostrando 13-24 de 203 artigos, teses e dissertações.
-
13. Simulation of the solidification in a channel of a water-cooled glass flow
A computer simulation study of a laminar steady-state glass flow that exits from a channel cooled with water is reported. The simulations are carried out in a two-dimensional, Cartesian channel with a backward-facing step for three different angles of the step and different glass outflow velocities. We studied the interaction of the fluid dynamics, phase cha
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
14. Effects of temperature-dependent viscosity on fluid flow and heat transfer in a helical rectangular duct with a finite pitch
An incompressible fully developed laminar flow in a helical rectangular duct having finite pitch and curvature with temperature-dependent viscosity under heating condition is studied in this work. Both the cases of one wall heated and four walls heated are studied. The cross-sectional dimensions of the rectangular duct are 2a and 2b. The aspect ratio n=2b/2a
Braz. J. Chem. Eng.. Publicado em: 2014-09
-
15. CFD and experimental investigation on the heat transfer characteristics of alumina nanofluids under the laminar flow regime
This study reports experimental and Computational Fluid Dynamics (CFD) investigations of the laminar convective heat transfer coefficient of Al2O3/water nanofluids in a circular tube under uniform and constant heat flux on the wall. Three different models including a constant physical properties single-phase (CP-SP) model, a variable physical properties sing
Braz. J. Chem. Eng.. Publicado em: 2014-06
-
16. An experimental simulation model for coated paper drying
Due to the lack of information regarding the phenomena of mass, heat, and momentum transfer in coated paper drying, substantial research work still needs to be done. A simulation model for coated paper drying is introduced which integrates heat and mass transfer mechanisms. In the model, the coated paper was assumed to have 3 layers (coated layer, wet and dr
Braz. J. Chem. Eng.. Publicado em: 2013-09
-
17. Heat transfer to immiscible liquid mixtures in a spiral plate heat exchanger
This work presents new predictive correlations for heat transfer to immiscible liquid-liquid mixtures in a spiral plate heat exchanger. Liquid-liquid heat transfer studies were carried out in spiral plate heat exchangers for the water-octane, water-kerosene, and water-dodecane systems. For each composition of the mixture, the mass flow rate of the cold fluid
Braz. J. Chem. Eng.. Publicado em: 2013-06
-
18. Análise da convecção forçada no escoamento bidimensional laminar em dutos retangulares via GITT com variáveis primitivas. / Analysis of forced convection in two-dimensional laminar flow in rectangular ducts with via gitt primitive variables.
In the present study, forced convection flow in two-dimensional laminar simultaneous development pipeline with rectangular geometry, is analyzed analytically using the Navier-Stokes, Poisson and Energy in its primitive form. These equations are solved by the Generalized Integral Transform Technique, which is characteristic hybrid-numeric. The development wor
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/09/2012
-
19. Análise da convecção forçada no escoamento bidimensional laminar em dutos circulares em variáveis primitivas via GITT. / Analysis of the forced convection in the bidimensional laminar flow in circular ducts in primitive variable by GITT.
No presente trabalho a convecção forçada interna no escoamento laminar em desenvolvimento simultâneo é estudada aplicando a Técnica da Transformada Integral Generalizada para produzir um solução híbrida para os campos de velocidade, pressão e temperatura em dutos circulres. As equações da Continuidade, de Navier-Stokes, de Possion e da Energia s�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/09/2012
-
20. Estudo in vitro de um material para selamento da interface implante-intermediário do tipo minipilar cônico em implantes de hexágono externo, hexágono interno e cone morse / In vitro sealing of a material of implant-abutment interface of mini conical pillar: inimplant external hexagon, internal hexagon and Morse taper
Microbial and fluidic leakage in the implant-abutment interface are shown in literature through a variety of studies, accusing the space that exists between the components of the implant, called \"GAP\", which seems to be the source of the microorganism infiltration, either from the external to the internal environment or the inverse, resulting in inflammato
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/05/2012
-
21. Distribuição do tempo de residência e letalidade no processamento térmico contínuo de líquidos com escoamento laminar não ideal em trocadores bitubulares. / Residence time distribution and lethality in the continuous thermal processing of liquids with non ideal laminar flow in bitubular exchangers.
Tubular heat exchangers are widely used for thermal processing of viscous liquid foods because they have larger hydraulic diameters than the plate heat exchangers. The calculation of lethality in this type of exchanger is directly related to velocity profile and the residence time distribution (RTD). For the laminar flow of viscous fluids, Newtonian and non-
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/03/2012
-
22. A study on the extension of an upwind parallel solver for turbulent flow applications
The present work is primarily concerned with studying the influence of an upwind spatial discretization on the capability of representing turbulent flows on aerospace applications, in the context of a flow simulation code that is fairly close to a production code. Therefore, the work addresses the issues of implementing and validating an advanced turbulence
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/02/2012
-
23. Determining the viscous behavior of non-Newtonian fluids in a flume using a laminar sheet flow model and Ultrasonic Velocity Profiling (UVP) system
The flow of non-Newtonian fluids in rectangular open channels has received renewed interest over the past number of years especially as large flumes are being used to transport tailings in countries like Chile. The effect of yield stress on the flow behavior is complex and not yet fully understood. The Ultrasonic Velocity Profiling (UVP) technique has been u
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012-09
-
24. Simulação física de fluxos gravitacionais : efeitos da variação de concentração e vazão do fluxo no depósito gerado / Physical simulation of gravitational flows : the effects of variations in concertration and output of the flow in the deposit generated
Simulações físicas de correntes de densidade em escala reduzida têm sido desenvolvidas para o entendimento dos processos físicos que ocorrem nos eventos naturais. O presente trabalho apresenta modelagens físicas de fluxos gravitacionais realizadas em tanque com forma de canal (4,5x0,15x0,5m). O objetivo foi o entendimento dos processos hidrodinâmicos
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/08/2011