Flexural Fatigue
Mostrando 1-12 de 14 artigos, teses e dissertações.
-
1. Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations
Abstract This in vitro study evaluated the fatigue strength of different ceramic materials indicated for monolithic restorations. Disc-shaped specimens were made according to ISO 6872 from five different ceramic materials: feldspathic ceramic (FC), polymer-infiltrated ceramic network (PIC), lithium disilicate glass-ceramic (LD), zirconia-reinforced lithium s
Braz. oral res.. Publicado em: 11/06/2018
-
2. Effect of Grinding and Resintering on the Fatigue Limit and Surface Characterization of a Y-TZP Ceramic
Resumo Este estudo avaliou o efeito de protocolos de desgaste e ressinterização no limite de fadiga flexural e na caracterização da superfície da zircônia LavaTM. Corpos-de-prova em forma de barra (20×4,0×1,2 mm, n=40; 20×4,0×1,5 mm, n=80) foram obtidos. Metade das barras com menor altura (1,2 mm) constituiu o grupo controle (AS), enquanto as de ma
Braz. Dent. J.. Publicado em: 2016-08
-
3. Experimental evaluation of cyclic fatigue resistance of four different nickel-titanium instruments after immersion in sodium hypochlorite and/or sterilization
NiTi instruments have a high risk of separation due to torsional or flexural fatigue (cyclic fatigue). Chemomechanical preparation, cleaning procedures, chemical disinfection and sterilization cause the corrosion of endodontic instruments that may weaken the fracture resistance of the instruments. Objective To assess the effects of NaOCl immersion and auto
J. Appl. Oral Sci.. Publicado em: 2013-12
-
4. Efeito do processamento e da inclusão de fibras nas propriedades mecânicas e ópticas de uma porcelana odontológica / The effect of processing methods and fibers incorporation on the optical and mechanical properties of a dental porcelain
The objective was to evaluate the processing methods (conventional sintering and heat pressing) and fibers incorporation on the microstructure, mechanical properties (flexural strength f, and Weibull parameters m, 0 e 5%), slow crack growth parameters (n e f0) and contrast ratio (CR), translucency parameter (TP), opalescence parameter (OP) optical properties
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/08/2011
-
5. Avaliação do modo de falha de coroas ceramocerâmicas de zircônia em função do protocolo de resfriamento e do desenho de infraestrutura / Evaluation of the zirconia crowns failure mode depending on cooling protocol and framework design
As excelentes propriedades mecânicas da zircônia como elevada resistência flexural e tenacidade à fratura fez com ela fosse o material cerâmico de eleição para as coroas e próteses fixas posteriores. Porém, mesmo com elevadas propriedades mecânicas os problemas relacionados a fratura ainda persistem. Variáveis como a baixa condutibilidade térmica
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/05/2011
-
6. Mechanical behavior of ceramic materials used for fixed partial dentures / Comportamento mecânico de cerâmicas utilizadas na confecção de próteses parciais fixas
Objectives: to determine the flexural strength (f), Weibull modulus (m), slow crack growth coefficient (n) and fracture toughness (KIC) of three ceramics used as framework materials for fixed partial dentures (FPDs) (YZ- yttria partially stabilized zirconia tetragonal polycrystals; IZ- alumina-based zirconia-reinforced glass infiltrated ceramic; AL alumina p
Publicado em: 2010
-
7. Verificação à fadiga de pontes rodoviárias mistas (aço-concreto) / Fatigue analysis of composite highway bridges
Steel and composite highway bridges (steel-concrete) are currently subjected to dynamic actions, for example, variable magnitude due to vehicles traffic on the deck rough pavement. These dynamic actions can generate the fractures nucleation or even their propagation on the structure. The correct consideration of these aspects pointed out to an analysis metho
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/03/2009
-
8. Resistência à fadiga flexural dos sistemas rotatórios k3 e Endosequence em razão do uso / Resistance to flexural fatigue of K3 and Endosequence rotary systems in relation to the use
The aim of this work was to evaluate the cyclic fatigue resistance of two different nickel-titanium rotary systems, K3 (Sybron Endo, EUA) and Endosequence (Brasseler, EUA), based on the number of uses. All rotary files which were selected had their conicity of 0,04, 25mm of length and tip diameter of 25, following ISO standardization. To reach the purposes,
Publicado em: 2008
-
9. "Resistência à fadiga cíclica flexural de instrumentos rotatórios de Ni-Ti em razão do uso e do torque" / Flexural cyclic fatigue resistance of NiTi rotatory instruments due to number of users and torque.
The aim of the present study was to evaluate the flexural cyclic fatigue resistance of nickel-titanium rotary instruments, number 25, taper 0,04, and length of 25mm (K3, SybronEndo), when submitted to several torque values and number of uses in simulated canal blocks, by using devices appropriated for dynamic tests. It was tried to detect whether, in additio
Publicado em: 2007
-
10. Efffect of ion exchange on Weibull and slow crack growth parameters and R-curve behavior of a dental porcelain / Efeito da troca iônica nos parâmetros de Weibull, de crescimento subcrítico de trincas e no comportamento de curva R de uma porcelana odontológica
O objetivo deste estudo foi avaliar o efeito da temperatura de troca iônica (TI) nas propriedades mecânicas da porcelana Ultrapaline ST e o efeito da TI nos parâmetros de crescimento subcrítico de trincas (SCG) (coeficiente de SCG - n, parâmetro escalar - ?f0), de Weibull (resistência característica - ?0, módulo de Weibull - m) e no comportamento de
Publicado em: 2007
-
11. Influence of pH of storage in the subcritical growth of trincas of odontológicas porcelains with different microstructures / "Influência do pH de armazenamento no crescimento subcrítico de trincas de porcelanas odontológicas com diferentes microestruturas"
O objetivo do trabalho foi determinar o efeito do pH de armazenamento (pH 3,5; 7,0 e 10,0) nos parâmetros de crescimento subcrítico (n e ? f0) de duas porcelanas odontológicas com diferentes microestruturas (com e sem leucita). A hipótese testada foi a de que o pH do meio afeta os parâmetros de crescimento subcrítico dos dois materiais. Duas porcelanas
Publicado em: 2006
-
12. An Inspection System to Identify Fatigue Damage on Steel-Bridge Structures
Crack formation and growth in steel bridge structural elements may be due to loading oscillations. The welded elements are liable to internal discontinuities along welded joints and sensible to stress variations. The evaluation of the remaining life of a bridge is needed to make cost-effective decisions regarding inspection, repair, rehabilitation, and repla
Journal of the Brazilian Society of Mechanical Sciences. Publicado em: 2002-03