Flexible Pipes
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Head loss in laser-perforated thin-walled polyethylene pipes for irrigation
RESUMO Para reduzir custos fixos e operacionais em sistemas de irrigação pressurizados são produzidos tubos de polietileno com pequena espessura de parede, com orifícios de descarga perfurados a laser, que operam a baixas pressões (até 100 kPa). A caracterização hidráulica desses materiais é essencial para o dimensionamento dos sistemas de irrigaç
Rev. bras. eng. agríc. ambient.. Publicado em: 06/05/2019
-
2. Tensile Armor Wires Submitted to Slow Strain Rate Tests in a Corrosive Environment and Cathodic Protection: a Comparison Between Two Different Microstructures
Tensile armor in flexible pipes consists of two or more layers of steel wires. Damage to the outer sheath may cause ingress of seawater in the annular space and thus corrosion of the armor wires. This work focused on the susceptibility of these wires to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) using a slow strain rate test (SSRT) under
Mat. Res.. Publicado em: 06/05/2019
-
3. Influencia de la temperatura en ensayos de arrancamiento sobre diferentes sistemas epoxi-acero de uso en conectores de ductos flexibles
ABSTRACT In the offshore oil fields located in deep and ultra-deep waters they are used flexible pipes. In many cases inside these pipes, the hydrocarbons are transported at elevated temperatures. At the ends of the flexible pipes are installed end fittings, these are the connection with sea platforms and different subsea systems. In the assembly of end fitt
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Caracterización de resinas epoxi para uso en conectores de ductos flexibles
ABSTRACT In the offshore productions of gas and oil are frequently used flexible pipes. The end fitting is the connection between the flexible pipe body and the production unit, at the assembly of this component is used epoxy resin to fill the free space inside it. This polymeric material holds the tensile armor wires to form the anchoring system. A critical
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. FLEXIBLE RISERS MONITORING TECHNIQUE BASED ON VIBRATION MEASUREMENTS / MONITORAMENTO DE RISERS FLEXÍVEIS ATRAVÉS DE TÉCNICA BASEADA EM VIBRAÇÕES
The main failure in flexible risers is the disruption of the wires from the tensile armor layer. Experience has shown that this class of damage occurs primarily near to the top riser connector. The breaking of the wires occurs gradually and may be caused by different processes as corrosion by inflow of fluid in the annular space, excessive wear associated wi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/04/2012
-
6. Detecção e localização de vazamentos em tubulações utilizando sistemas acústicos e redes neurais / Leak detection and location in pipelines through acoustic method and neural networks
Pipeline networks are complex systems of ducts used nowadays for gas and chemical products transporting through long distances. They frequently cross highly populated regions, water supplies or natural reserves. Even small leaks in pipelines can lead to great losses of products and serious damages to the environment before it could be detected. With the purp
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
7. Estudo comparativo entre modelos na análise local de tubos flexíveis. / Comparative study between modles in local analysis of flexible pipes.
Este trabalho apresenta um estudo comparativo entre resultados obtidos através de um modelo analítico-numérico, um modelo em elementos finitos e resultados experimentais na análise estrutural local de tubos flexíveis utilizados na explotação de petróleo. Em particular, o modelo em elementos finitos proposto considera efeitos de não-linearidade decor
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/08/2011
-
8. MONITORING MECHANICAL STRESS ON FLEXIBLE RISERS BY ELECTROMAGNETISM / MONITORAMENTO DE TENSÃO MECÂNICA EM RISERS FLEXÍVEIS POR ELETROMAGNETISMO
As técnicas eletromagnéticas de inspeção têm se destacado como as únicas com potencial de determinar, de forma não invasiva, a tensão mecânica nos arames de sustentação dos risers flexíveis. Como o duto flexível é uma estrutura complexa, constituída por várias camadas de aço e de termopl ástico, as técnicas tradicionais de inspeção não
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2011
-
9. MONITORING FLEXIBLE RISERS WITH OPTICAL FIBER SENSORS / MONITORAMENTO DE RISERS FLEXÍVEIS COM SENSORES A FIBRA ÓPTICA
The interest in structural health monitoring of flexible risers has grown significantly in recent years. For ducts that are already reaching their design life, monitoring systems can provide early warnings of potential failures and also assist the operator in scheduling downtime. Different techniques are being tested by operators of flexible pipes such as au
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/04/2011
-
10. Avaliação das armaduras de tração de riser flexível durante ensaios axiais de tração e fadiga
O presente trabalho tem como objetivo avaliar as tensões atuantes no conjunto conector e duto flexível de camadas não aderentes durante ensaios com carregamentos axiais de tração e fadiga. Estes ensaios são utilizados para a qualificação de dutos flexíveis. Foram desenvolvidos e patenteados alguns modelos de conectores contemplando apenas a parte es
Publicado em: 2010
-
11. Modificação do LLDPE através de silanos viabilizando a aplicação em camadas plásticas de linhas flexíveis / Study of silane grafting reactions of low density polyethylene for pipe applications
The flexible lines are flexible structures manufactured through plastic and steel layers that allows its use in order to permit fluid flow in exploration and production of hydrocarbon between offshore oil units and sea bed and/or coast. Nowadays these pipes are one of the main ways to permit the exploration of hydrocarbon in deepwater. The present study aims
Publicado em: 2009
-
12. Experimental study of structural behavior of curved bars. / Estudo experimental do comportamento estrutural de barras curvas.
This dissertation deals with an experimental study on the structural behavior of bars supported on a helical cylindrical surface and subject to compressive loads. A special experimental apparatus was designed and built for this purpose. The design, as well as the adjustment of such an apparatus is described in details. The device allows one adjusting the bar
Publicado em: 2009