Finite Elements Technique
Mostrando 1-12 de 63 artigos, teses e dissertações.
-
1. Experimental-numerical Technique to Evaluate the Thickness of TiN Thin Film
In this study, the numerical analysis of instrumented indentation testing was combined with the experimental procedure to evaluate the mechanical properties and thickness of a titanium nitride (TiN) film deposited on titanium substrate (Ti) by plasma processing. TiN film thickness is an important parameter for the surface treatment industry. In numerical ana
Mat. Res.. Publicado em: 09/09/2019
-
2. Some Aspects of Numerical Modeling of Steel-Concrete Composite Beams with Prestressed Tendons
Abstract Aspects about the numerical modeling of three-dimensional prestressed steel-concrete composite beams by using the finite element (FE) method are highlighted and commented in this work. Emphasis is given to the numerical treatment of bonded and unbonded tendons. The proposed modeling technique uses curved beam and catenary elements for simulating int
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
3. Contact phenomena modeling in biological structures on the example of the implant-bone
Abstract The work presents modeling of interface phenomena in biological structures. Selected ways of numerical modeling of phenomena at the boundary of two materials by means of FEM methods are discussed. The work focuses on phenomena related to biological structures and their mutual interactions. Using an example of an implant-bone system, various techniqu
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
4. Finite element simulation of fracture in a restored premolar tooth using high aspect ratio elements
Abstract Introduction The term cracked tooth syndrome refers to an incomplete fracture of a vital posterior tooth that involves the dentin and occasionally extends into the pulp. There is a very limited number of publications trying to model dentin crack growth using numerical techniques. Therefore, it is essential to numerically model this phenomenon in o
Res. Biomed. Eng.. Publicado em: 19/03/2018
-
5. Continuous Modeling Technique of Fiber Pullout from a Cement Matrix with Different Interface Mechanical Properties Using Finite Element Program
Abstract Fiber-matrix interface performance has a great influence on the mechanical properties of fiber reinforced composite. This influence is mainly presented during fiber pullout from the matrix. As fiber pullout process consists of fiber debonding stage and pullout stage which involve complex contact problem, numerical modeling is a best way to investiga
Lat. Am. j. solids struct.. Publicado em: 2016-10
-
6. Finite Element Analysis of Structures with Extruded Aluminum Profiles Having Complex Cross Sections
Abstract Extruded aluminum profiles are widely used in building and automation structures due to their durability, lightweight, corrosion resistance, shorter fastening time and reusability. Proper design is crucial in maintaining the lifespan of these structures. It is therefore essential to determine the structural behaviors of the structures such as the na
Lat. Am. j. solids struct.. Publicado em: 2016-08
-
7. Shear Strengthening of RC Deep Beams with Sprayed Fiber-reinforced Polymer Composites (SFRP): Part 2 Finite Element Analysis
AbstractThis paper presents the finite element analysis conducted on SFRP strengthened reinforced concrete (RC) deep beams. The analysis variables included SFRP material (glass and carbon), SFRP thickness (3 mm and 5 mm), SFRP configuration and strength of concrete. The externally applied SFRP technique is significantly effective to enhance the ultimate load
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
8. Nonlinear Equilibrium and Stability Analysis of Axially Loaded Piles Under Bilateral Contact Constraints
AbstractThis paper presents a nonlinear stability analysis of piles under bilateral contact constraints imposed by a geological medium (soil or rock). To solve this contact problem, the paper proposes a general numerical methodology, based on the finite element method (FEM). In this context, a geometrically nonlinear beam-column element is used to model the
Lat. Am. j. solids struct.. Publicado em: 2015-04
-
9. Estudo de distorções em soldagem com uso de técnicas numéricas e de otimização / Study of distortion in welding by using numerical and optimization techniques
The occurrence of distortions of structures is common during welding. Such distortions are more severe in the case of large structures, such as shipbuilding. Since distortions can increase manufacturing costs and time during shipbuilding, a thorough study of causes and consequences of distortions is necessary. Therefore, this work aims to study the distortio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/06/2012
-
10. Study of tension in the periodontal ligament using the finite elements method
Orthodontic movement is process of transformation of a physical stimulation into a force applied to a tooth, with a biological response identified as bone remodelling. Although it is possible to measure the force applied on a tooth, its distribution around the root is irregular forming areas of higher concentration of tensions, which do not correspond to the
Dental Press Journal of Orthodontics. Publicado em: 2012-02
-
11. Finite element simulation of viscous fingering in miscible displacements at high mobility-ratios
Numerical simulations of viscous fingering instabilities in miscible displacements at high mobility-ratios are presented. Anisotropic dispersion and monotonic viscosity profiles are considered. The coupled set of partial differential equations is approximated by the semi-discrete SUPG stabilized finite element formulation plus a discontinuity capturing techn
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-09
-
12. Applied mechanics of the Puricelli osteotomy : a linear elastic analysis with the finite element method
Background: Surgical orthopedic treatment of the mandible depends on the development of techniques resulting in adequate healing processes. In a new technical and conceptual alternative recently introduced by Puricelli, osteotomy is performed in a more distal region, next to the mental foramen. The method results in an increased area of bone contact, resulti
Publicado em: 2010