Finite Element Modeling
Mostrando 1-12 de 224 artigos, teses e dissertações.
-
1. Modeling and Computer Simulation of Viscoelastic Crypt Deformation
ABSTRACT Colorectal cancer morphogenesis begins at the cellular level from cell mutations in the intestinal epithelium cavities called crypts. These mutations lead to a pressure difference in the epithelium crypt walls, which can cause deformation and generate visible abnormalities in the epithelium. The geometrical modeling of these crypts and the mathemati
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
2. Optimization Techniques and Mathematical Modeling Applied to Reluctance Motors
Abstract The present work aims at the application of different optimization strategies in the electromagnetic analysis of the Variable Reluctance Motor (VRM) through Finite Element (FE) simulation. Two case studies are investigated: the first one aims to optimize the geometry and electrical characteristics of windings of a single-phase VRM 6/6, minimizing co
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Mathematical Modeling of the Film Influence on the Salting Time of Mozzarella Cheese in a Static and Dynamic System: Application of Artificial Neural Networks of the Multilayer Perceptron Type
The NaCl and KCl diffusion in the film formed on the cheese surface during salting was simulated by the finite element method. The time and salts concentration values on the cheese surface were determined, tabulated, and presented to the multilayer perceptron neural network (MLP) for the regression modeling. The samples were divided into 70, 15 and 15% for t
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. Methodology to Generate a Reluctance Network Applied to Permanent Magnet Synchronous Generators
Abstract This paper presents a methodology for the generation of a static reluctance network, with magnetomotive sources only in the rotor, applied in the analysis and design of surface mounted permanent magnet synchronous generators. In the analysis stage, this network can provide the magnetic flux in several points of the generator, enabling an estimate of
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
5. THE INFLUENCE OF THE FILM FORMED ON THE PRATO CHEESE SURFACE DURING THE NACL AND KCL SALTING PROCESS: APPLICATION OF THE FINITE ELEMENT METHOD AND NEURAL NETWORKS OF THE SELF-ORGANIZING MAP (SOM) AND MULTILAYER PERCEPTRON (MLP) TYPES
Sodium chloride is used in the cheese salting process as it promotes sensory changes and food preservation. However, in excess can cause hypertension problems, and for this reason, it has been partially replaced by potassium chloride. In the present work, Prato cheese was subjected to joint diffusion of NaCl and KCl by immersion in static and stirred brine.
Química Nova. Publicado em: 2022
-
6. Study of the interaction of concrete walls with the foundation structure
Abstract This article presents a study of the factors that influence the mechanism of soil-structure interaction with a pilot building having concrete walls and their impact on their performance. To illustrate the studies carried out, a numerical modeling of a four-floor concrete wall pilot building was performed, subjected to vertical actions, supported by
REM, Int. Eng. J.. Publicado em: 2021-06
-
7. PARAMETERS FOR MODELING PASSIVE SUSPENSIONS OF SPRAY BARS
ABSTRACT The uniformity and quality of spraying depend on the stability of the spray boom, defined as the suspension system between the boom and the machine chassis. This paper presents a procedure for improving the performance of passive spray bar suspensions through parameter adjustment. Two multibody dynamics models of a tractor sprayer set were developed
Eng. Agríc.. Publicado em: 2021-05
-
8. FEM-DEM simulation of Uniaxial Compressive Strength (UCS) laboratory tests
Abstract Finite/discrete element methods (FDEM) are hybrid numerical models that use algorithms to analyze the transition from continuous to discontinuous. This type of formulation allows modeling physical laboratory tests with greater proximity to reality. This article proposes to simulate the average behavior of a uniaxial compression test campaign. The te
REM, Int. Eng. J.. Publicado em: 2020-12
-
9. Application of self-organizing maps to evaluate the influence and behavior of the film formed during salting of Prato cheese
Abstract Problems related to high blood pressure have led consumers to choose foods with low levels of sodium chloride, and an alternative to reduce the salt content of this salt is its partial replacement with KCl. In order to not affect the sensory properties of cheese, salting was performed using a solution containing 70% of NaCl and 30% of KCl in a stati
Food Sci. Technol. Publicado em: 2020-12
-
10. Simultaneous Transfer of Na+, K+, and Fe2+ Ions During Salting of Precooked Mushroom (Agaricus bisporus): Mathematical Modeling, Optimization, and Experimental Validation
The champignon mushroom has no antinutritional factors that can affect iron bioavailability. It is considered a functional food and can provide health benefits by presenting bioactive components. The simultaneous transfer of Na+, K+ and Fe2+ in the pre-cooked mushroom (Agaricus bisporus) was modeled and simulated by the finite element method (FEM). The Biot
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
11. Optimization of shells modeled using NURBS subjected to a dynamic loading condition
Abstract This study presents an optimization method for the thickness of shell elements subjected to dynamic loads. Structural analyses were carried out using the finite element method. The analyzed domains were modeled using NURBS, and meshes were generated using a transformation of the parametric domain into the geometric domain via a geometric function. T
REM, Int. Eng. J.. Publicado em: 2020-03
-
12. Mathematical Modeling of the Transesterification Reaction by Finite Elements: Optimization of Kinetic Parameters Using the Simplex Sequential Method
The use of biodiesel as fuel has been presented as a viable alternative in the search for renewable energies. It can be produced from the transesterification reaction of vegetable oils with methanol in the presence of sodium or potassium hydroxide as catalysts. In the present research, the transesterification reaction of soybean oil was modeled considering t
J. Braz. Chem. Soc.. Publicado em: 2020-02