Films Lb
Mostrando 1-12 de 53 artigos, teses e dissertações.
-
1. Heterostructured Langmuir-Blodgett Films of Ruthenium Bipyridine with 1,3,4-Naphthooxadiazole-Derived Amphiphile Complex as a Charge Storage Electrode
The molecular control in Langmuir-Blodgett (LB) films may be exploited in charge storage electrodes provided a suitable choice of molecular architecture and components is made. In this paper, we employed a naphtyl-1,3,4-oxadiazole amphiphile (NFT1) and its complex [Ru(bpy)2NFT1]PF6 (RuNFT1) (bpy = 2,2’-bipyridine) in heterostructured LB films in a proof-of
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
2. Metallic Phthalocyanines: impact of the film deposition method on its supramolecular arrangement and sensor performance
Abstract This short review gives a concise overview of the impact of deposition methods on the supramolecular arrangement of metallic phthalocyanine films and their applications. Primarily, an introduction about the possible phthalocyanine molecular structures and derivatives obtained from modification on the phthalocyanine rings was presented. The possibili
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
3. The Influence of Different Ammonium Cations on the Optical Properties of Tetrakis GdIII and EuIII Complexes
A series of tetrakis-β-diketonate Q+[Ln(β-dik)4]–, where Ln = GdIII or EuIII, Q = ammonium cations and β-dik = tta (2-thenoyltrifluoracetone) or bmdm (1-(4-tert-butylphenyl)-3-(4-methoxyphenyl)-1,3-propanedione) have been synthesized and characterized. The environment surrounding the EuIII ion depends on the lateral groups of the ligand and on the alkyl
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
4. Corrosion and Micro-abrasive Wear Behaviour of 2524-T3 Aluminium Alloy with PAni-NPs/PSS LbL Coating
In this paper, we present an alternative method to obtain thin films for coating protection on the surface of the AA2524-T3 Al-alloy by using the Layer-by-Layer (LbL) technique. The LbL films were fabricated by alternated immersion of the Al-alloy into a poly(styrene sulfonate) (PSS) and polyaniline nanoparticles (PAni-NPs) solutions, obtaining a PAni-NPs/PS
Mat. Res.. Publicado em: 06/06/2019
-
5. Enzymes immobilized in Langmuir-Blodgett films: Why determining the surface properties in Langmuir monolayer is important?
ABSTRACT In this review we discuss about the immobilization of enzymes in Langmuir-Blodgett films in order to determine the catalytic properties of these biomacromolecules when adsorbed on solid supports. Usually, the conformation of enzymes depends on the environmental conditions imposed to them, including the chemical composition of the matrix, and the mor
An. Acad. Bras. Ciênc.. Publicado em: 11/01/2018
-
6. Poly(3-octylthiophene)/stearic Acid Langmuir and Langmuir-Blodgett films: Preparation and characterization
A study is reported on Langmuir and Langmuir-Blodgett (LB) films obtained by adding different percentages of stearic acid (SA) to poly(3-octylhiophene) (P3OT). Surface pressure - mean molecular area (π - A) isotherms, ultraviolet-visible (UV-Vis) absorption spectrum, atomic force microscope (AFM) and dc electrical measurements have been used for characteriz
Mat. Res.. Publicado em: 2014-12
-
7. Supramolecular arrangements of an organometallic forming nanostructured films
Organometallic materials have become subject of intensive research on distinct technological applications. The Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) techniques have proven to be suitable to address challenges inherent to organic devices, in which the film properties can be tuned at molecular level. Here, we report on the supramolecular arrangemen
Mat. Res.. Publicado em: 2014-12
-
8. Imobilização da enzima glicose oxidase em filmes nanoestruturados para aplicação em biossensores / Glucose oxidase immobilization on nanostructured thin films for application in biosensors
Aplicações de nanomateriais em biossensores têm recebido muito interesse nos últimos anos. Entre os vários tipos de biossensores estudados, sensores de glicose têm recebido destaque devido a sua importância em diagnósticos clínicos. Apesar do grande avanço no monitoramento de glicose nas últimas décadas, ainda há muitos desafios para alcançar u
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/07/2012
-
9. Self-assembled films from chitosan and poly(vinyl sulfonic acid) on Nafion® for direct methanol fuel cell
Filmes de quitosana/poli(ácido vinilsulfônico) (PVS) foram depositados sobre membranas de Nafion® a partir do método camada por camada (LbL), visando o seu uso em células a combustível de metanol direto (DMFC). Métodos computacionais e espectros de infravermelho com transformada de Fourier (FTIR) sugerem a formação de um par iônico entre o grupo su
Journal of the Brazilian Chemical Society. Publicado em: 2012-03
-
10. Sensores e biossensores baseados em transistores de efeito de campo utilizando filmes automontados nanoestruturados / Sensors and biosensors based on field-effect transistors using nanostructured self-assembled films
Separative extended gate field-effect transistor (SEGFET) device is an alternative to the conventional ion-sensitive field-effect transistor (ISFET). The great advantage of SEGFET refers to its easy processing, i.e., it is limited under only manipulation of the gate electrode, avoiding the conventional microelectronic processes. In this way, ion sensors and
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/11/2011
-
11. Fotossensibilizadores nanoestruturados por sistema camada por camada
A busca por materiais que possam ser modificados em nível molecular tem sido o alvo de numerosas pesquisas no mundo. Desta maneira, as técnicas de fabricação de filmes finos se destacam devido à possibilidade de se reduzir custos e melhorar a eficiência de sistemas como, por exemplo, os fotossensíveis. Neste contexto, o objetivo deste trabalho foi a o
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/07/2011
-
12. Influência dos polieletrólitos na resposta eletroquímica de filmes automontados contendo nanotubos de carbono para aplicação em nanomedicina / Influence the polyelectrolytes on the electrochemical response of layer-by-layer films containing carbon nanotubes for applications in nanomedicine
Carbon Nanotubes (CNTs) are cylindrical carbon nanostructures exhibiting excellent electrical, thermal, optical and mechanical properties. The immobilization of CNTs in nanostructured thin films in conjunction with polymers using the Layer-by-Layer (LbL) technique provides a new alternative for development of nanocomposites to be used as sensors and biosenso
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/06/2011