Fiber Composite
Mostrando 1-12 de 324 artigos, teses e dissertações.
-
1. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
2. MECHANICAL AND PHYSICAL PROPERTIES OF WOOD/POLYETHYLENE COMPOSITE REINFORCED WITH TIO2 NANOPARTICLES
ABSTRACT Wood plastic composite was fabricated using high density polyethylene and pine wood fiber. The effect of addition of TiO2 nanoparticles at different weight fractions (0%, 1%, 3%, and 5%) on some properties of the composite was examined. The experimental composites were tested for bending strength, tensile strength, Izod impact strength, thickness sw
CERNE. Publicado em: 2020-12
-
3. OTIMIZAÇÃO DO PROCESSO NÃO INVASIVO E NÃO DESTRUTIVO DE EXTRAÇÃO E ANÁLISE DE METABÓLITOS VOLÁTEIS DE MAMÃO PAPAIA POR SPME-GC-MS
The analysis of volatiles is an alternative in the routine of quality control of fruits, since the volatile metabolites can change in the presence of microorganisms. A well-established method for extracting volatiles is the solid phase microextraction (SPME). This work aims to define some parameters (fiber coating, conditioning time and fiber exposure time)
Quím. Nova. Publicado em: 2020-09
-
4. Rapid Determination of Vitamins D2 and D3 in Dairy Products by High-Performance Liquid Chromatography after Solid Phase Extraction Based on Polystyrene/Polypyrrole Composite Nanofibers
The detection of vitamin D in complex samples is challenging because of the instability of vitamin D in sample preparation. To resolve this problem, packed-fiber solid-phase extraction (PFSPE) has been successfully developed for the pre-treatment of samples containing vitamin D2 (D2) and vitamin D3 (D3) in dairy products. Based on PFSPE, vitamin D could avoi
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
5. Evaluation of extruded corn breakfast cereal enriched with whole peach palm (Bactris gasipaes, Kunth) Flour
Abstract The present study aimed to develop extruded corn breakfast cereal enriched with whole peach palm flour. A 22 central composite rotatable design was used, and the cereal was processed in a ZKS-30 co-rotational twin-screw extruder (Werner and Pfleiderer), followed by its physicochemical, technological and microbiological characterization. The technolo
Food Sci. Technol. Publicado em: 2020-06
-
6. Strain-deformation Reconstruction of Carbon Fiber Composite Laminates Based on BP Neural Network
The Carbon Fiber Reinforced Polymer (CFRP) laminate structural components used in the aerospace and military domains require high precision and strong stability. Usually the deformation of these structural components is difficult to be measured directly during operation, but the deformation of the CFRP laminate structure can be reconstructed with strain info
Mat. Res.. Publicado em: 14/11/2019
-
7. Study of the Moisture Absorption in Polymer Composites Reinforced with Vegetal Fiber Using Langmuir’s Model
This work aims to numerically study the moisture absorption in polymer composites reinforced with vegetal fiber, using the diffusive model of Langmuir, which considers the existence of water molecules inside the material free to diffuse and adsorb at the capillaries walls, in the solid. A three-dimensional and transient mathematical modelling to describe the
Mat. Res.. Publicado em: 11/11/2019
-
8. Effect of Different Fiber Reinforcement Strategies on the Fracture Strength of Composite Resin Restored Endodontically Treated Premolars
Abstract Objective: To compare the effect of three different fiber reinforcement strategies on the fracture strength of composite resin restored endodontically treated premolars. Material and Methods: Seventy-two sound human premolars extracted for orthodontic reasons were divided into 6 groups (n=12) after endodontic treatment. Group 1: intact teeth (posi
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 31/10/2019
-
9. Evaluation of extruded corn breakfast cereal enriched with whole peach palm (Bactris gasipaes, Kunth) Flour
Abstract The present study aimed to develop extruded corn breakfast cereal enriched with whole peach palm flour. A 22 central composite rotatable design was used, and the cereal was processed in a ZKS-30 co-rotational twin-screw extruder (Werner and Pfleiderer), followed by its physicochemical, technological and microbiological characterization. The technolo
Food Sci. Technol. Publicado em: 28/10/2019
-
10. Influence of Composition on Mechanical Properties of Cassava Starch, Sisal Fiber and Carnauba Wax Biocomposites
Concern for sustainable development has provided significant improvements in the development of biodegradable materials. This work aims to evaluate, through a central composite design (CCD), the mechanical properties of cassava starch-based biocomposites manufactured with different compositions of carnauba wax (CW), sisal fiber (SF) and glycerol (G). The bio
Mat. Res.. Publicado em: 24/10/2019
-
11. Evaluation of the Projectile's loss of Energy in Polyester Composite Reinforced with Fique Fiber and Fabric
Firearms threat has always been a matter of personal concern, especially to soldiers in armed conflicts as well as police officers and civilians involved with public security. A multilayered armor system (MAS) is intended to personal protection against high kinetic energy ammunition, such as that used in rifles. MAS layers are normally composed of a front ce
Mat. Res.. Publicado em: 21/10/2019
-
12. Crosslinking starch/oat hull mixtures for use in composites with PLA
Abstract Modification of composite components has been proposed as a tool to improve their functional properties. The present work studied crosslinking of a starch/oat hull mixture by reactive extrusion with sodium trimetaphosphate (STMP), for application in composites with polylactic acid (PLA). The treated mixture was characterized regarding degree of subs
Polímeros. Publicado em: 10/10/2019