Fgm
Mostrando 1-12 de 136 artigos, teses e dissertações.
-
1. Flash glucose monitoring system in special situations
ABSTRACT The management of diabetes mellitus (DM) requires maintaining glycemic control, and patients must keep their blood glucose levels close to the normal range to reduce the risk of microvascular complications and cardiovascular events. While glycated hemoglobin (A1C) is currently the primary measure for glucose management and a key marker for long-term
Archives of Endocrinology and Metabolism. Publicado em: 2022
-
2. Use of flash glucose-sensing technology in patients with type 2 diabetes treated with liraglutide combined with CSII: a pilot study
Glycemic variability (GV) may be linked to the development of diabetic complications by inducing inflammation, oxidative stress, and endothelial dysfunction. Flash glucose monitoring (FGM) provides a novel method of continuously monitoring interstitial glucose levels for up to 14 days. This study randomly assigned poorly controlled type 2 diabetes mellitus p
Braz J Med Biol Res. Publicado em: 2020-01
-
3. Bond strength assessment of a universal adhesive system in etch-and-rinse and self-etch modes
Resumo Introdução A odontologia moderna é refletida na inserção de novos materiais com diferentes formas de adesão nas estruturas dentárias, como o sistema adesivo Universal. Objetivo Avaliar a resistência adesiva do sistema adesivo universal em dentina, na forma de aplicação auto condicionante e convencional, comparando com um sistema adesivo co
Rev. odontol. UNESP. Publicado em: 07/11/2019
-
4. New nonlinear solution of nearly incompressible hyperelastic FGM cylindrical shells with arbitrary variable thickness and non-uniform pressure based on perturbation theory
Abstract In this paper, nonlinear analysis of thick cylindrical shells with arbitrary variable thickness made of hyperelastic FGM with radially variation of material properties in nearly incompressible state under non-uniform pressure loading is presented. Thickness and pressure of the shell vary in axial direction by linear and/or nonlinear functions. The g
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
5. Effect of Glass Fiber Post Adaptation on Push-Out Bond Strength to Root Dentin
Resumo O objetivo neste estudo foi avaliar o impacto de diferentes diâmetros de pinos de fibra de vidro (PFVs) na resistência de união à dentina. Quarenta dentes humanos unirradiculares foram tratados endodonticamente e utilizados para cimentação de PFVs (White Post DC, FGM) com diferentes diâmetros (n=10): P1 - ø 1,6 mm coronal x 0,85 mm apical; P2
Braz. Dent. J.. Publicado em: 22/07/2019
-
6. Six-month performance of restorations produced with the ethanol-wet-bonding technique: a randomized trial
Abstract This double-blind randomized controlled clinical trial evaluated the effectiveness of dentin pretreatment with 100% ethanol (EWBT – ethanol wet bonding technique) and different adhesive protocols in noncarious cervical lesions (NCCL) after 6 months. Patients presenting at least one NCCL were included. NCCLs (n=148) were randomly assigned to 4 grou
Braz. oral res.. Publicado em: 01/07/2019
-
7. Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics
Abstract: The objective of this study was to evaluate the effect of the hydrofluoridric acid (HF) concentration and time of acid conditioning on bond strength of three glass ceramics to a resin cement. Thus, fifty blocks (10 mm x 5 mm x 2 mm) of each ceramic (LDCAD: IPS e.max CAD; LCAD: IPS Empress CAD and LDHP: IPS e.max Press) were made and embedded in acr
Braz. oral res.. Publicado em: 16/05/2019
-
8. Influence of the Micromechanics Models and Volume Fraction Distribution on the Overall Behavior of SiC/Al Functionally Graded Pressurized Cylinders
Abstract The assessment of the differences in results obtained from various micromechanics homogenization schemes, as well as the implications of assuming different volume fraction profiles was carried out in the present work. The functionally graded composite chosen for the analysis was Al-SiC and comparisons were made in terms of stress and strain distribu
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
9. Free and forced vibration analysis of multiple cracked FGM multi span continuous beams using dynamic stiffness method
Abstract In the present paper, the free and forced vibration of multiple cracked multi span continuous beams made of functionally graded material (FGM) is investigated by the dynamic stiffness method. First, there are constructed dynamic stiffness matrix and nodal load vector of multiple cracked FGM beam element using Timoshenko beam theory and massless doub
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
10. Vibration analysis of laminated functionally graded shallow shells with clamped cutout of the complex form by the Ritz method and the R-functions theory
Abstract The R-functions theory and Ritz approach are applied for analysis of free vibrations of laminated functionally graded shallow shells with different types of curvatures and complex planforms. Shallow shells are considered as sandwich shells of different types: a) face sheets of the shallow shells are made of a functionally graded material (FGM) and t
Lat. Am. j. solids struct.. Publicado em: 18/02/2019
-
11. Finite element formulation and analysis of a functionally graded Timoshenko beam subjected to an accelerating mass including inertial effects of the mass
Abstract This study describes a new finite element method that can be used to analyse transverse and axial vibrations of a Functionally Graded Material (FGM) beam under an accelerating / decelerating mass. The differential equations of the FGM beam are obtained using First-order Shear Deformation Theory (FSDT). In these equations, the interaction terms of ma
Lat. Am. j. solids struct.. Publicado em: 08/10/2018
-
12. On the stability of internally pressurized thick-walled spherical and cylindrical shells made of functionally graded incompressible hyperelastic material
Abstract In this paper, stability analysis of thick-walled spherical and cylindrical shells made of functionally graded incompressible hyperelastic material subjected to internal pressure is presented. Instability point happens in the inflation of above mentioned shells and in this paper effect of material inhomogeneity and shell thickness has been investig
Lat. Am. j. solids struct.. Publicado em: 04/06/2018