Ferritic Stainless Steel
Mostrando 1-12 de 58 artigos, teses e dissertações.
-
1. Influence of Nb Content on Sensitization and Pitting Corrosion of Welded AISI 430 Ferritic Stainless Steel
Resumo Neste trabalho, o efeito da adição de Nb na sensitização e corrosão por pite de aço inoxidável ferrítico AISI 430 submetido à soldagem TIG foi investigado por caracterização microestrutural e técnicas eletroquímicas. As três regiões distintas do processo de soldagem, zona fundida, zona termicamente afetada e metal de base do aço AISI
Soldag. insp.. Publicado em: 07/10/2019
-
2. Avaliação da susceptibilidade de precipitação da fase sigma na soldagem do aço inoxidável duplex SAF2205
RESUMO A soldagem de aços inoxidáveis duplex é uma operação crítica, devido aos ciclos térmicos aos quais o material é submetido, que podem favorecer a precipitação de fases deletérias. Nesse contexto, objetivo dessa pesquisa é analisar a influência da energia de soldagem na susceptibilidade à formação de fase sigma no aço duplex SAF2205. As
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Simulação termodinâmica computacional de liga modelo de aço super ferrítico contendo 0,07% de boro
RESUMO Aços inoxidáveis super ferríticos são utilizados em equipamentos como trocadores de calor e torres de destilação que operam em condições extremas de temperatura, pressão e em ambientes contendo altas concentrações de cloretos, H2S e CO2, encontradas nas novas áreas de exploração de petróleo e gás na costa brasileira. Uma liga super fer
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Nitretação a plasma da junta soldada do aço inoxidável super duplex SAF 2507
RESUMO Os aços inoxidáveis superduplex (AISD) apresentam em sua microestrutura as fases ferrita e austenita, de modo a conciliar boas propriedades mecânicas e de resistência à corrosão. Estes materiais possuem grande aplicação na indústria de extração de petróleo e na petroquímica. Quando estão sujeitos a estas aplicações, os dutos de AISD so
Matéria (Rio J.). Publicado em: 20/05/2019
-
5. Efeito da taxa de resfriamento sobre a formação de martensita em um aço inoxidável ferrítico com 11 %Cr e baixos teores de intersticiais
RESUMO Estudou-se o efeito da taxa de resfriamento sobre a cinética de formação da martensita e sua evolução microestrutural em um aço inoxidável ferrítico com 0,011 %C - 11,1 %Cr - 0,013 N, usando a técnica de dilatometria e a microscopia ótica. Amostras foram austenitizadas a 1000°C por um minuto, seguida de resfriamento sob várias taxas até a
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Avaliação da Adição de Ti, Nb e (Ti+Nb) na Microestrutura e Susceptibilidade à Sensitização de Aços Inoxidáveis Ferríticos Submetidos à Soldagem TIG
Resumo Neste estudo, a microestrutura e a resistência à corrosão intergranular de aços inoxidáveis ferríticos com adições de Nb, Ti e (Ti+Nb) submetidos à soldagem TIG foram investigadas. A caracterização estrutural dos cordões de solda foi realizada através de microscopias óptica (MO) e eletrônica de varredura (MEV) e espectroscopia por energ
Soldag. insp.. Publicado em: 16/05/2019
-
7. Influence of heat treatments on the microstructure and degree of sensitization of base metal and weld of AISI 430 stainless steel
ABSTRACT AISI 430 is a non-stabilized ferritic stainless steel grade with carbon content lower than 0.12%.After hot and cold rolling this material is annealed. The slow cooling after soaking at temperatures between 900oC and 1000oC promotes the formation of a high quantity of carbides and nitrides, while the rapid cooling partially suppresses the formation o
Matéria (Rio J.). Publicado em: 08/01/2018
-
8. Microstructure, Texture and Microhardness Evolution during Annealing Heat Treatment and Mechanical Behavior of the Niobium-Stabilized Ferritic Stainless Steel ASTM 430 and Niobium-Titanium-Stabilized Ferritic Stainless Steel ASTM 439: a Comparative Study
A comparison of the influence of microstructure and texture on mechanical behavior between the niobium-stabilized ferritic stainless steel type ASTM 430, 430Nb, and the niobium-titanium-stabilized ferritic stainless steel type ASTM 439 was performed. The two steels were supplied as cold rolled thin sheets and the annealing was interrupted in different tempe
Mat. Res.. Publicado em: 18/09/2017
-
9. Electrochemical Study of the AISI 409 Ferritic Stainless Steel: Passive Film Stability and Pitting Nucleation and Growth
The aim of the present work was to study the passive film stability and pitting corrosion behavior of the AISI 409 stainless steel. The electrochemical tests were carried out in 0.1 M NaCl solution at room temperature. The general electrochemical behavior was assessed using electrochemical impedance spectroscopy (EIS) measurements whereas the semiconducting
Mat. Res.. Publicado em: 18/09/2017
-
10. Comparative Study of Microstructure, Texture, and Formability Between 11CrTi and 11CrTi+Nb ASTM 409 Ferritic Stainless Steel
Stabilization of ferritic stainless steel ASTM 409, for use in automobile exhaust systems, is increasingly in demand, due to higher exhaust gas temperatures. Ti is one of the most commonly used elements. However, high concentrations cause problems during steel casting; however, stabilization with Ti and Nb represents a good alternative. The present study aim
Mat. Res.. Publicado em: 31/08/2017
-
11. Characterization of the Austenite Reformation Mechanisms as a Function of the Initial Ferritic State in a UNS S32304 Duplex Stainless Steel
Aiming to better understand the effects of heat treatment parameters on Ferrite-Austenite phase transformation in a 2304 duplex stainless steel different thermal cycles were applied to this steel in a quenching dilatometer. The obtained microstructures were characterized by optical microscopy, transmission electron microscopy and electron backscatter diffrac
Mat. Res.. Publicado em: 17/08/2017
-
12. Evaluation of Intermediate Annealing on Nb-Stabilized Ferritic Stainless Steel
This study seeks to evaluate the effect of intermediate annealing on the microstructure, texture, and formability of Nb-stabilized ferritic stainless steel. Two routes - direct cold rolling and cold rolling with an intermediate annealing were performed. The total reduction was 80%, 3-0.6 mm and 3-1.2-0.6 mm. The characterization of the samples was conducted
Mat. Res.. Publicado em: 07/08/2017