Faults Detect
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Sistemas inteligentes para monitoramento e diagnósticos de falhas em motores de indução trifásicos / Intelligent systems for faults monitoring and diagnosis in three-phase induction motors
The objective of this thesis consists of the implementation of intelligent systems for three-phase induction motors fault diagnosis and condition monitoring. Therefore, an experimental test stand for stator winding inter-turn short circuit faults, broken rotor bar in squirrel cage and, finally, defective wheel bearing has been designed. The main focus is to
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/04/2012
-
2. Detecção de defeitos do tipo Resistive-Open em SRAM com o uso de lógica comparadora de vizinhança
The world we live today is very dependent of the technology advance and the Systemson- Chip (SoC) are one of the most important actors of this advance. As a consequence, the Moore s law has been outperformed due to this strong demand on the SoCs for growth, so that new silicon technologies has emerged along with new fault models that decreased the reliabilit
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/2012
-
3. Detecção de falhas em circuitos eletrônicos lineares baseados em classificadores de classe única. / Fault detection in electronics linear circuits based in one class classifiers.
This work deals with the application of one class classifiers in fault detection. The faults to be detected are related parametric faults. The transfer function of each circuit was generated and the outputs signals with the components in and out of tolerance were analyzed. Pattern recognition and one class classifications tools are employed to perform the an
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/08/2011
-
4. MÉTODOS PARA CORREÇÃO DAS DISTORÇÕES DA FORMA DE ONDA SECUNDÁRIA CAUSADAS PELA SATURAÇÃO DE TRANSFORMADORES DE CORRENTE PARA SERVIÇO DE PROTEÇÃO / METHODS FOR CORRECTION OF SECONDARY WAVEFORM DISTORTIONS CAUSED BY SATURATION OF CURRENT TRANSFORMERS FOR PROTECTIVE RELAYING PURPOSES
This work aims to evaluate the performance of some methods used to detect and correct the distorted portions of the secondary current signal waveform, which occur due to the core saturation of current transformers. Such methods are presented didactically divided among techniques existing in the specialized literature and new methodologies proposed. Involving
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/02/2011
-
5. Crisis communication : organization's reactions to unexpected events
A reputação é considerada o ativo mais importante das empresas. Ela permite o estabelecimento de relações comerciais e garante um bom funcionamento da organização. Quando um evento inesperado surge, a reputação pode ser ameaçada. Os gerentes, líderes da organização, têm então que demonstrar reatividade e capacidade em responder as necessidades
Publicado em: 02/02/2011
-
6. A new adaptive analog test and diagnosis system
This paper presents a low-cost analog test system with diagnosis capabilities. The tester is able to detect faults in any linear circuit by learning a reference circuit behavior in a first step, and comparing this behavior against the output of the circuit under test in a second step. For a faulty circuit, a third step takes place to locate the fault. The di
Publicado em: 2011
-
7. Fault detection in communication systems / Detecção de falhas em sistemas de comunicações
The present work is focused in the area of fault detection in communications systems using billing tickets archives as base of information. In most of the cases, these archives are used by the telecommunication carriers only for billing purposes. The thesis presents algorithms for fault detection and consequence alarms generation. The algorithms are analyzed
Publicado em: 2008
-
8. J-sdl: um framework para a simulação de especificações em sdl e geração automática de casos de teste
- The objective of tests in software is to detect faults before it can be released. Methods exist to generate test cases as long as the software behavior is represented as a Finite State Machine (FSM), for example: T, UIO, D e Switch Cover. Due to some limitations in FSM, it is necessary to investigate specification techniques that enable explicit representa
Publicado em: 2008
-
9. Avaliação de estruturas de edifícios em concreto armado com vistas à reabilitação / Evaluation of building structures in concrete with a view to rehabilitation
With the growing number of serious problems found in the reinforced concrete structures, according to the research on damage done by Dal Molin in 1998 and Andrade 1997, there has been a growing demand for inspections and the maintenance of residential buildings both in Pernambuco and country as a whole. However, it is possible to observe that the practice of
Publicado em: 2008
-
10. Fault diagnosis in a rotor supported by active magnetic bearings / Detecção de falhas em rotores sustentados por mancais magneticos ativos
This work applies the methodology of fault diagnosis in rotating machinery supported by active magnetic bearings and active con1rol systems, excited by unbalance and white noise. This diagnostic applies the correlation matrices based on the Ljapunov matrix formulation and artificial neural network for linear stationary systems. The procedure uses only measur
Publicado em: 2006
-
11. Detecção e diagnóstico de falhas em motores de indução
This main purpose of this work is to design and implement a system to detect and diagnose electrical faults (stator inter-turn short circuit and broken rotor bars) and mechanical faults (unbalance and shaft misalignments) for three phase induction machines. This approach starts by obtaining the best patterns for fault detection and symmetrical models for the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/07/2005
-
12. Detecção identificação e reconfiguração de falhas múltiplas em sensores de sistemas lineares invariantes no tempo / Detection, identification and reconfiguration of multiple faults in sensors of linear time invariant systems
This work has as objective to develop a technique for the detection, identification and reconfiguration of multiple faults in sensors of linear time invariant systems using the analytical redundancy approach. It is the result of the study of several fault detection and identification techniques found in the literature, that use the state observer method due
Publicado em: 2005