Fatigue Of Materials
Mostrando 13-24 de 77 artigos, teses e dissertações.
-
13. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
14. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
15. Numerical stress-life curves for the AISI 4340 steel using two sets of materials properties and different bi-axial stress ratios
Abstract Fatigue assessments by the more robust strain-based approach demand the determination of the local strain history from nominal stresses. For notched members, a cyclic constitutive relation, the stress concentration factor (SCF) and a strain concentration rule are used with this aim in some approximate solutions. The plastic part of the cyclic consti
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
16. Preface to the special issue of the International Symposium on Solid Mechanics (MecSol 2017)
Abstract The International Symposium on Solid Mechanics (MecSol) is a biennial conference which aims to provide a forum to discuss relevant issues associated with solid mechanics. The MecSol 2017 edition was held in the city of Joinville, Brazil, on 26-28 April 2017. Plenary lectures were delivered by researchers from five different countries. The main topic
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
17. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
18. Fracture Behavior and Fatigue Performance of Inconel 625
Inconel 625 is a nickel-based highly-resistant superalloy widely used in aerospace components, in the nuclear industry, and especially in the maritime industry. Materials such as Inconel 625 have been widely used in oil exploration of Brazilian pre-salt layers due to their excellent resistance to corrosion under tension, pitting and crevice corrosion by chlo
Mat. Res.. Publicado em: 25/06/2018
-
19. Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations
Abstract This in vitro study evaluated the fatigue strength of different ceramic materials indicated for monolithic restorations. Disc-shaped specimens were made according to ISO 6872 from five different ceramic materials: feldspathic ceramic (FC), polymer-infiltrated ceramic network (PIC), lithium disilicate glass-ceramic (LD), zirconia-reinforced lithium s
Braz. oral res.. Publicado em: 11/06/2018
-
20. Materials Selection of Optimized Titanium Alloys for Aircraft Applications
The aim of the present work was to explore the correlation between the physical metallurgy of titanium alloys and its main attributes to select optimized materials for structural aircraft applications in the landing gear beam. The Ashby's method was employed as the materials selection strategy to consolidate and evaluate the data collected from the current l
Mat. Res.. Publicado em: 19/02/2018
-
21. Microstructure and Mechanical Properties of ASTM A743 CA6NM Steel Welded by FCAW Process
CA6NM steel is widely used in the manufacture of hydraulic turbines metallic parts, due to its resistance to corrosion and cavitation damage, combined with good weldability and fatigue properties. However, welding of this type of steel is complex and to ensure a minimum residual stress after welding it is necessary perform a post welding heat treatment (PWHT
Mat. Res.. Publicado em: 21/09/2017
-
22. Effect of the modification by titanium dioxide nanotubes with different structures on the fatigue response of Ti grade 2
Nanotechnology is seeing as having potential to raise benefits to several research and application areas. Recently materials with nanostructured surfaces of nanopores, nanotubes and nanowires have become an important investigation field, since their chemical and physical properties may be substantially different from those of the corresponding substrate. In
Mat. Res.. Publicado em: 18/05/2017
-
23. Evaluation of Microstructure and Mechanical Properties of Seamless Steel Pipes API 5L Type Obtained by Different Processes of Heat Treatments
This research presents the influence of manufacturing processes and heat treatments on the resulting microstructures and mechanical properties of an API 5L PSL2 seamless steel pipe. Three different conditions are considered - as rolled, normalized and quenched and tempered - to obtain the grades X42R, X42N and X70Q, respectively. Scanning electron microscopy
Mat. Res.. Publicado em: 06/03/2017
-
24. Development and Test of an Equipment to Measure Residual Strain Inside Pipes Using the Hole-Drilling Method
Abstract Residual stresses are present in materials or structural component in the absence of external loads or changes in temperatures. The most common causes of residual stresses being present are the manufacturing or assembling processes. All manufacturing processes, such as casting, welding, machining, moulding, heat treatment, etc, introduces residual s
Lat. Am. j. solids struct.. Publicado em: 2016-12