Fatigue Of Materials
Mostrando 1-12 de 77 artigos, teses e dissertações.
-
1. Two-shift operation mode can improve the efficiency and comfort of flexible ureteroscopic holmium laser lithotripsy for the treatment of renal calculi larger than 1.5cm
ABSTRACT Purpose: To compare two-shift operation mode and single player mode different impact on surgical results and operator comfort in flexible ureteroscopic holmium laser lithotripsy for renal calculi larger than 1.5cm. Materials and Methods: From december 2017 to december 2018, 92 patients with renal calculi admitted to Qilu Hospital and were treated
Int. braz j urol.. Publicado em: 20/12/2019
-
2. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
RESUMO O processo de furação por escoamento produz buchas para uniões removíveis que podem ser roscadas pelo processo de rosqueamento por conformação, reduzindo etapas da produção de componentes da indústria automobilística e em galpões da construção civil. Aços de alta resistência e baixa liga (ARBL) são empregados em variadas aplicações n
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Effects of Gas Nitriding on Fatigue and Crack Initiation of Ti6Al4V produced by Selective Laser Melting
Selective laser melting (SLM) is an additive manufacturing technique which permits fabrication of three dimensional parts by selectively melting consecutive layers of metallic powder. This allows the production of parts with high geometrical complexity. Titanium alloy Ti-6Al-4V (Ti64) is widely used in industry due to its high strength-to-mass ratio, corrosi
Mat. Res.. Publicado em: 15/07/2019
-
4. Effect of cold-working process on cyclic deformation of electrolytic copper
Abstract Cyclic softening and hardening processes are expressed by the change in the stress amplitude necessary to cause a given strain amplitude. Understanding the cyclic stress-strain behavior of materials is an important step in the complex study of their fatigue behavior. The potential differences between the defect structures of cold-formed materials ma
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
5. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
ABSTRACT Flow drilling process produces bushes for removable joints that can be threaded by forming tapping process, reducing stages in production of components of automobile industry and in construction sheds. High strength and low alloy steels (HSLA) are employed on several applications in the processing industry. Benefits provided by these materials make
Matéria (Rio J.). Publicado em: 10/06/2019
-
6. Fatigue survival and damage modes of lithium disilicate and resin nanoceramic crowns
Abstract Polymer-based composite materials have been proposed as an alternative for single unit restorations, due to their resilient and shock absorbing behavior, in contrast to the brittleness of ceramic materials that could result in failure by fracture. Objective: To evaluate the fatigue strength and damage modes of monolithic posterior resin nanoceramic
J. Appl. Oral Sci.. Publicado em: 30/05/2019
-
7. Desenvolvimento de uma máquina para ensaio de fadiga por flexão
RESUMO O conhecimento acerca das propriedades mecânicas dos materiais é de grande importância para aplicações de engenharia. O estudo dessas propriedades é necessário para o desenvolvimento de novos equipamentos ou produtos e uma importante propriedade é a resistência à fadiga. O objetivo deste trabalho é apresentar o projeto e construção de uma
Matéria (Rio J.). Publicado em: 20/05/2019
-
8. Uma nova abordagem para a medição da diluição de soldagem, baseada nos pontos de inflexão de um Contorno Ativo
RESUMO Em diversas aplicações, com ênfase nos processos de soldagem dissimilar, a diluição, em conjunto com outros fatores, pode afetar as propriedades mecânicas dos materiais soldados, sendo assim, capaz de gerar falhas durante as condições normais de serviço. Deste modo, a taxa de diluição geralmente é calculada a partir da análise de imagens
Matéria (Rio J.). Publicado em: 20/05/2019
-
9. Morphology of the DIN 100Cr6 Case Hardened Steel after Plasma Nitrocarburizing Process
Nitrocarburizing is considered one of the most important thermochemical treatments for surface modification of metallic materials and involves the simultaneous diffusion of nitrogen and carbon onto the surface. Understanding and controlling the formation of the nitrocarburized layer have considerable industrial interest due to the improvements regarding wear
Mat. Res.. Publicado em: 04/04/2019
-
10. Evaluation of the dispersion of carbon nanotubes in an elastomeric polyurethane and fatigue test
Abstract Two series of polyurethane (PU) and carbon nanotubes (CNT) based composites with 0.0, 0.25, 0.5 and 1.0 mass% of CNT were obtained from diluting a commercial masterbatch with 30 mass% CNT and using two different dispersion methods. The quality of the dispersions was assessed using optical microscopy, and scanning and transmission electron microscop
Polímeros. Publicado em: 18/03/2019
-
11. Fatigue degradation strategies to simulate crack propagation using peridynamic based computational methods
Abstract The aim of this paper is to develop new computational tools to study fatigue crack propagation in structural materials. In particular we compare the performance of different degradation strategies to study fatigue crack propagation phenomena adopting peridynamic based computational methods. Three fatigue degradation laws are proposed. Two of them ar
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
12. New material perspective for endocrown restorations: effects on mechanical performance and fracture behavior
Abstract The aim of this study was to investigate the mechanical performance and the fracture behavior of endocrown restorations prepared using distinct restorative materials. A total of 42 sound molars with similar crown size and shape were cut at 2 mm above the cementoenamel junction and endodontically treated. They were categorized according to the restor
Braz. oral res.. Publicado em: 11/02/2019