Extrusion Process
Mostrando 13-24 de 181 artigos, teses e dissertações.
-
13. Cellulose Associated with Pet Bottle Waste in Cement Based Composites
The present study was to evaluate the effect of polyethylene terephthalate (PET) particle sizes on the mechanical and physical properties of extruded fiber-cement composites with different particle sizes combined to cellulose pulp in the production of fiber cement by the extrusion process. The design consisted of four formulations, one composed of 5% cellulo
Mat. Res.. Publicado em: 31/07/2017
-
14. Thermal and Mechanical Properties of Vinyltrimethoxysilane (VTMOS) Crosslinked High Molecular Weight Polyethylene (HMWPE)
The use of polyethylene in sliding systems for automotive industry requires adequate mechanical properties, such as high wear resistance, besides good processing properties in conventional extrusion processes. Aiming to fulfill these requirements, crosslinks were introduced in a high molecular weight polyethylene (HMWPE) grade through a process involving gra
Mat. Res.. Publicado em: 27/07/2017
-
15. Reprocessability of PHB in extrusion: ATR-FTIR, tensile tests and thermal studies
Abstract Mechanical recycling of biodegradable plastics has to be encouraged, since the consumption of energy and raw materials can be reduced towards a sustainable development in plastics materials. In this study, the evolution of thermal and mechanical properties, as well as structural changes of poly(hydroxybutyrate) (PHB) up to three extrusion cycles wer
Polímeros. Publicado em: 29/06/2017
-
16. Devulcanization of Natural Rubber in Composites with Distinct Crosslink Densities by Twin-Screw Extruder
In this study, the effects of the devulcanization process realized by an intermeshing co-rotating twin-screw extruder (ICTSE) on three vulcanized Natural Rubber (NR) composites with different crosslink densities (CD) have been investigated. The extrusion parameters were fixed, as well as the initial material granulometry and auxiliary thermoplastic added to
Mat. Res.. Publicado em: 02/05/2017
-
17. Mechanical recycling of tags and labels residues using sugarcane bagasse ash
Abstract In this study, an alternative method for recycling residues of labels and stickers (parings) containing biaxically oriented polypropylene (BOPP) and polyurethane-based glue was discussed. The recycling of this type of material is complicated, once the separation and the milling processes are difficult to be accomplished, due to the presence of a lar
Polímeros. Publicado em: 2017-03
-
18. The effect of gelatin amount on the properties of PLA/TPS/gelatin extruded sheets
Abstract Films and sheets composed by poly (lactic acid) (PLA)/thermoplastic starch (TPS) and TPS/gelatin blends have already been produced and characterized in the literature. However, materials produced with these three biopolymers have not been clearly investigated. In this work, extruded sheets were produced with PLA, TPS (glycerol as plasticizer) and di
Polímeros. Publicado em: 2017-03
-
19. Poly(lactic acid)/thermoplastic starch sheets: effect of adipate esters on the morphological, mechanical and barrier properties
Abstract Blends of poly(lactic acid) (PLA) and thermoplastic starch (TPS) plasticized with adipate esters (diisodecyl adipate and diethyl adipate) having different molecular weight were used to produce sheets. The calendering-extrusion process at a pilot scale was used, and the mechanical, barrier, and morphological characterization of the obtained materials
Polímeros. Publicado em: 04/03/2016
-
20. Thermal Stabilization study of polyacrylonitrile fiber obtained by extrusion
A low cost and environmental friendly extrusion process of the Polyacrylonitrile (PAN) polymer was viabilized by using the 1,2,3-propanetriol (glycerol) as a plasticizer. The characterization of the fibers obtained by this process was the object of study in the present work. The PAN fibers were heat treated in the range of 200 °C to 300 °C, which is the te
Polímeros. Publicado em: 2015-12
-
21. Caracterización de semielaborados de aleaciones de titanio procesadas por extrusión y laminación perforación (proceso Mannesmann)
ABSTRACTFor the manufacture of seamless pipes and tubes are used, as raw materials, hollow bars from hot deformation processes like extrusion and rotary tube piercing (Mannesmann process). Starting from these semi-elaborated products and by means of successive cross sections reductions through tube drawing or tube rolling (cold pilgering) the requested final
Matéria (Rio J.). Publicado em: 2015-09
-
22. Crack Propagation Analysis of Magnesium Rod Processed by Extrusion-shear: Numerical Modeling and Experimental Verification
During extrusion-shear (ES) process, the surface cracks would be formed in the processed rod for AZ31 magnesium caused by nonhomogeneous metal flow and stress. To reduce the cracks defects, three-dimensional (3D) finite element method (FEM) of ES on a wrought AZ31 magnesium alloy have been performed. ES process experiments have been also conducted to verify
Mat. Res.. Publicado em: 2015-08
-
23. Hot Consolidation of Partially Amorphous Cu-Ti Based Alloy: a Comparison Between Hot Extrusion and Hot Compaction by Sintering
Consolidation of amorphous powders, which take advantage of the supercooled liquid region, is an alternative way to overcome the size limitation in marginal metallic glasses. Cu36Ti34Zr22Ni8based amorphous powders were obtained during high energy ball-milling. The analyses revealed that amorphous structures of powders and ribbons are quite different and this
Mat. Res.. Publicado em: 2015-06
-
24. Cell cycle synchronization and BrdU incorporation as a tool to study the possible selective elimination of ErbB1 gene in the micronuclei in A549 cells
Lung cancer often exhibits molecular changes, such as the overexpression of the ErbB1 gene that encodes epidermal growth factor receptor (EGFR). ErbB1 amplification and mutation are associated with tumor aggressiveness and low response to therapy. The aim of the present study was to design a schedule to synchronize the cell cycle of A549 cell line (a non-sma
Braz J Med Biol Res. Publicado em: 06/03/2015