Experiment Simulation
Mostrando 1-12 de 182 artigos, teses e dissertações.
-
1. DESIGN AND EXPERIMENT OF SELF-PROPELLED SYSTEM FOR PADDY FIELD WEEDER BASED ON THE INTERACTION MECHANISM OF WHEEL-SOIL
ABSTRACT Aiming at the low mechanization of paddy field weeding and lack of dedicated agricultural machinery for paddy field weeding in China, a self-propelled system of paddy field weeding machine was designed. The overall structure and working principle of self-propelled system were illustrated and analyzed. The interaction mechanism of wheel-soil during w
Engenharia Agrícola. Publicado em: 2022
-
2. PARAMETERS FOR MODELING PASSIVE SUSPENSIONS OF SPRAY BARS
ABSTRACT The uniformity and quality of spraying depend on the stability of the spray boom, defined as the suspension system between the boom and the machine chassis. This paper presents a procedure for improving the performance of passive spray bar suspensions through parameter adjustment. Two multibody dynamics models of a tractor sprayer set were developed
Eng. Agríc.. Publicado em: 2021-05
-
3. MODELING YIELD, SOIL WATER BALANCE, AND ECONOMIC RETURN OF SOYBEAN UNDER DIFFERENT WATER DEFICIT LEVELS
ABSTRACT Evaluating the impacts of water stress on crop yield allows comparing irrigation management alternatives, aiming to ensure an economic return for the irrigated farms. Thus, the main objectives of this study were to model the soil water balance, deriving the crop coefficients, grain yield prediction, and economic return of soybean grown at different
Eng. Agríc.. Publicado em: 2020-08
-
4. AN INVESTIGATION OF THE HEAT TRANSFER PERFORMANCE OF DUAL IMPROVED INTERMIG IMPELLERS IN A STIRRED TANK WITH AN INNER HEATING COIL
Abstract The heat transfer process in a stirred tank of diameter T=0.5m equipped with dual-layer improved Intermig impellers and helical coils was investigated by experiment and numerical simulation methods. The temperature field, the temperature boundary layer lateral to the coil and the heat transfer coefficient were measured at different rotational speeds
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
5. Service levels of highway toll plazas: the influence of factors on manual customer service
Abstract Paper aims To analyze service levels offered in a highway toll plaza and to test the influence of operational and human factors on manual customer service. Originality The methodology is an approach which involves systematic and efficient examination of multiple factors. This approach has been widely used in multiple areas; however, little researc
Prod.. Publicado em: 04/11/2019
-
6. High-Frequency Induction Heating of Al-Si-Cu-Mg aluminum alloy in Thixoforming
Thixoforming is the process of shaping near net shape metal components in a semisolid state. The process consists of preparing feedstock, reheating and shaping. Reheating the billet is the most critical step in thixoforming. Induction heating requires precise temperature control to obtain globular microstructure and prevent process defects, such as insuffici
Mat. Res.. Publicado em: 28/10/2019
-
7. Construção de uma Maquete do Sistema Solar com Controle de Temperatura para Alunos com Deficiência Visual
Resumo Neste trabalho, apresentamos um estudo realizado para o desenvolvimento de um conjunto didático baseado no uso do tato e de elementos com controle térmico para o ensino de Astronomia. A proposta surgiu diante das dificuldades encontradas na busca de experimentos capazes de apresentar, da melhor forma, conceitos envolvidos no ensino de Astronomia par
Rev. Bras. Ensino Fís.. Publicado em: 28/10/2019
-
8. OUTLIER=GROSS ERROR? DO ONLY GROSS ERRORS CAUSE OUTLIERS IN GEODETIC NETWORKS? ADDRESSING THESE AND OTHER QUESTIONS
Abstract This article has theoretically discussed some points regarding outliers caused by errors in geodetic observations (see consideration made). Comments have also been made on the usual 3σ-rule to identify outliers and its common approachs in the simulation of outliers in geodetic networks. Three simulated experiments have been conducted to verify the
Bol. Ciênc. Geod.. Publicado em: 14/10/2019
-
9. Cardinal temperatures and modeling of vegetative development in guava
RESUMO O objetivo deste estudo foi estimar as temperaturas cardinais (basal inferior, ótima e basal superior) e simular o desenvolvimento vegetativo da goiabeira através dos modelos filocrono (linear) e Wang e Engel (não linear) durante a fase de muda. Um experimento de campo instalado em Itajubá, MG (22° 24’ 46.43” S 45° 26’ 48.94” O) foi cond
Rev. bras. eng. agríc. ambient.. Publicado em: 14/10/2019
-
10. Acoustic Emissions from Wind Turbine Blades
ABSTRACT Research on broadband aerodynamic noise from wind turbine blades is becoming important in several countries. In this work, computer simulation of acoustic emissions from wind turbine blades are predicted using quasi empirical model for a three-bladed horizontal axis 3 MW turbine with blade length ~47 m. Sound power levels are investigated for source
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
11. Analysis of a car door subjected to side pole impact
Abstract The results of a study on the response of a side impact beam located in a car door to impact loading is presented. The side impact beam is situated in both the front and rear side doors of a vehicle between the inner and outer shells to minimise intrusion into the passenger compartment during a collision whilst absorbing as much impact energy as pos
Lat. Am. j. solids struct.. Publicado em: 30/09/2019
-
12. Influencia de la geometría del proyectil en ensayos dinámicos de tracción
ABSTRACT The focus of this study is to discuss the influence of the projectile’s length on the results of an experiment of the Hopkinson Traction Bar (SHTB). Simulations have been made by means of finite elements using the commercial software ABAQUS in tests of traction at high speeds of deformation in samples of aluminum alloy 7017T73 varying the length o
Matéria (Rio J.). Publicado em: 16/09/2019