Evaporation
Mostrando 1-12 de 524 artigos, teses e dissertações.
-
1. Processamento de catalisadores gastos de unidade de hidrodessulfurização profunda (ultra-deep HDS)
PROCESSING OF SPENT ULTRA-DEEP HYDRODESULFURIZATION CATALYSTS. This work discusses the recycling of spent NiMo/Al2O3 catalysts from ultra-deep hydrodesulfurization (HDS) units. They contain a refractory coke and fouling elements from the processed feedstocks. Samples were preoxidized (600 ºC) for 12 h using a very slow heating rate to eliminate coke and vol
Química Nova. Publicado em: 2022
-
2. Productivity and photosynthetic pigments in bell pepper plants grown in soil with biofertilizer and protected against water loss
ABSTRACT The search for techniques that maximize the use of water is becoming necessary for the sustainability of agriculture in semi-arid areas. In this sense, the present work aimed to evaluate the effects of soil protection against water loss and the use of bovine biofertilizer on fruit production and chlorophyll content in bell pepper plants. The experim
Rev. Ceres. Publicado em: 2021-02
-
3. Influence of block freeze concentration and evaporation on physicochemical properties, bioactive compounds and antioxidant activity in blueberry juice
Abstract This study investigated the impacts of centrifugal block freeze concentration (CBFC) and evaporation processes on physicochemical properties, bioactive compounds and antioxidant activity applied to fresh blueberry juice. After three concentration cycles, the solutes were approximately 3.6 times to the initial condition (12 °Brix) and the final colo
Food Sci. Technol. Publicado em: 2020-12
-
4. Preparation of Fluorescent Carbon-Based Dots from Waste Tire Pyrolysis
The pyrolysis of waste tire has been proposed as an alternative route to its recycling producing residual oils that can be used as fuels. In this work, a physicochemical process to obtain carbon-based dots (CBD) from carbon black (CBL) derivatives of tires is described. For this, the CBL was treated with different acids to produce CBL1 and CBL2 particles sus
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
5. Cation Vacancies in NiFe2O4 During Heat Treatments at High Temperatures: Structural, Morphological and Magnetic Characterization
Nickel ferrite (NiFe2O4) was synthesized by mixing stoichiometric amounts of α-Fe2O3 and NiO using mechanical milling and heat treatments at high temperatures. The physical characterization of the samples was carried out using X-ray diffraction, infrared and Raman spectroscopies, Mössbauer spectrometry, magnetization measurements, scanning electron microsc
Mat. Res.. Publicado em: 20/12/2019
-
6. Tadalafil-loaded PLGA microspheres for pulmonary administration: preparation and evaluation
Tadalafil, a long-acting PED-5 inhibitor, is commonly used for the treatment of pulmonary arterial hypertension (PAH). However, its efficacy and clinical application are severely limited by the poor water solubility, low bioavailability and a series adverse effects (e.g. headaches, indigestion). In this study, tadalafil was prepared and loaded into biodegrad
Braz. J. Pharm. Sci.. Publicado em: 20/12/2019
-
7. Obtaining and characterization of anthocyanins from Euterpe oleracea (açaí) dry extract for nutraceutical and food preparations
Abstract The main constituents of the Euterpe oleracea Mart., Arecaceae, fruits (açaí) are anthocyanins. This paper aimed to standardize the extraction process and characterize an anthocyanin-rich dry extract obtained from this fruit. A 23 full factorial design was used. The volumes of ethanol 92% and acetic acid and the extraction time were used as factor
Rev. bras. farmacogn.. Publicado em: 09/12/2019
-
8. Bioactive compounds in edible flowers of garden pansy in response to irrigation and mycorrhizal inoculation
ABSTRACT Edible flowers have been increasingly used in the Brazilian gastronomy because they are considered functional foods with high antioxidant potential. Studies on the management of cultivation of edible flowers to increase the production of bioactive compounds have been developed aiming at the improvement of production systems. The objective of this wo
Rev. Ceres. Publicado em: 02/12/2019
-
9. Silymarin-Laden PVP-Nanocontainers Prepared Via the Electrospraying Technique for Improved Aqueous Solubility and Dissolution Rate
Abstract The aim of the present research was to develop a silymarin-laden PVP-nanocontainer providing ameliorated aqueous solubility and dissolution of the drug. Several silymarin-laden formulations were formed with varying quantities of PVP and SDS via the solvent evaporation method using the electrospraying technique. The influence of the hydrophilic carri
Braz. arch. biol. technol.. Publicado em: 28/11/2019
-
10. Avaliação do comportamento de estanqueidade à água de argamassas e hidrorrepelentes – Parte II
RESUMO Além da função estética, os revestimentos de fachada protegem as edificações da penetração de água e, consequentemente, diminuem a propensão ao surgimento de manifestações patológicas que levariam à degradação da superfície. Este trabalho apresenta os ensaios de avaliação do comportamento de estanqueidade à água de revestimentos a
Matéria (Rio J.). Publicado em: 25/11/2019
-
11. Estudo de caso do desempenho de estanqueidade à água de argamassas e hidrorrepelentes - Parte I
RESUMO Um dos agentes desencadeadores de manifestações patológicas em edificações é o ingresso de fluídos e sais em fachadas degradadas pela ausência de manutenção ao longo de sua vida útil. O presente estudo avalia o desempenho de estanqueidade à água de oito revestimentos argamassados, sendo dois dosados em obra e seis industrializados, e de q
Matéria (Rio J.). Publicado em: 25/11/2019
-
12. Design of Three-Layer Antireflection Coating for High Reflection Index Lead Chalcogenide
Antireflection coatings (ARC), not only reduce the reflection of the incident radiation but also protect the surface from environmental degradations. In present study, three- layer design was theoretically calculated and experimentally realized on the surface of lead chalcogenide, which had high refractive characteristics. First the theoretical designs of th
Mat. Res.. Publicado em: 11/11/2019