Eulerian Model
Mostrando 1-12 de 38 artigos, teses e dissertações.
-
1. SIMULATION AND EXPERIMENTAL INVESTIGATION OF POWER CONSUMPTION, GAS DISPERSION AND MASS TRANSFER COEFFICIENT IN A MULTI-PHASE STIRRED BIOREACTOR
Abstract Bio-oxidation leaching of refractory gold concentrate was carried out in a typical gas-liquid-solid three-phase stirred bioreactor. The bacteria, which adhered to solid particle surfaces and spread over the liquid phase, require sufficient oxygen and nutrient of carbon and nitrogen, and then the mass transfer rate should be considered. However, the
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. Investigation of hydrodynamics and heat transfer in pseudo 2D spouted beds with and without draft plates
Abstract In the present study, hydrodynamics and gas to particle heat transfer in pseudo two dimensional spouted beds (2DSB) with and without draft plates were investigated using the Eulerian-Eulerian approach. The main objective of the study was to provide an understanding of effects of the presence of draft plates on the hydrodynamics and heat transfer beh
Braz. J. Chem. Eng.. Publicado em: 2017-10
-
3. STUDY OF FEEDSTOCK INJECTION TO IMPROVE CATALYST HOMOGENIZATION IN THE RISER OF A FCC
Abstract A three dimensional gas-solid reactive flow model based on the Eulerian-Eulerian approach was used to study the effects of different nozzle designs with internal parts inside the FCC riser. The simulations were solved using Computational Fluid Dynamics (CFD) with CFX version 14.0 as tool. The results showed that the nozzle designs have a significant
Braz. J. Chem. Eng.. Publicado em: 2016-09
-
4. CFD modeling of two immiscible fluids mixing in a commercial scale static mixer
A Computational Fluid Dynamics model based on the Eulerian formulation for multiphase flow was developed to model the mixing hydrodynamics of two immiscible fluids in a commercial scale static mixer. The two immiscible liquids were condensate and caustic solutions and were considered as two phases that are interpenetrating each other. The aim of this study w
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
5. A Model Analysis for the Design and Deployment of an Eulerian Sediment Trap Mooring Array in a Western Boundary Upwelling System from Southeast Brazil
Esta contribuição dirigiu-se aos procedimentos adotados para o desenho e configuração de uma linha de fundeio eulariana com armadilhas de sedimentação, a qual foi instalada na borda da plataforma (zm ≈ 140 m) a 80 km de Cabo Frio, SE-Brasil (23°S). O local foi sujeito à dinâmica entre a Água Tropical (AT) da Corrente do Brasil (BC), intrusões da
An. Acad. Bras. Ciênc.. Publicado em: 2014-06
-
6. Metodologia para aplicar LES ao craqueamento catalítico fluido em um reator riser industrial / Large eddy simulation application methodology to a fluid catalytic cracking industry reactor
The main objective of this thesis is to propose a methodology in how to apply Large Eddy Simulation (LES) on a unit of catalytic cracking. In order to achieve this, it was proposed an alternative way of constructing the computational mesh, by using quasi-uniform meshes. The proposed meshes were implemented to minimize the computational effort and procedure f
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/09/2012
-
7. Simulação computacional de escoamentos reativos com baixo número Mach aplicando técnicas de refinamento adaptativo de malhas / Computational simulation of low Mach number reacting flows applying adaptive mesh refinement techniques.
It is the main goal of the present work to extend a numerical methodology based on both the use of an adaptive mesh refinement technique (AMR) and the use of a multistep, implicit-explicit time-step strategy (IMEX) to applications involving low Mach number reactive flows. Originally developed for incompressible flows, the Eulerian formulation of that methodo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/06/2012
-
8. Eulerian-lagrangian simulation of a turbulent evaporating spray
This work consists in a numerical simulation of a spray jet: a two-phase flow composed by a gaseous and a liquid phase. The gaseous phase is treated as a continuous medium, and the liquid phase is treated as a dispersed phase. An asymptotic approximation of zero Mach number was applied to the gaseous phase in order to account for density variations due to te
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/11/2011
-
9. Sobre o acoplamento fluido-casca utilizando o método dos elementos finitos / On fluid-shell coupling using the finite element method
This work consists of the development of computational tools for nonlinear geometric fluid-shell interaction analysis using the Finite Element Method (FEM). The fluid solver is explicit and its time integration based on characteristics. The computational code is able to simulate the Navier-Stokes equations for compressible flows written in the Eulerian descr
Publicado em: 2011
-
10. Solução via LES de chamas difusivas de metano, metanol e etanol
This work presents a model for a jet diffusion flame, for low Mach and high Damköhler numbers. The model is based on the solution of the flamelet equations for the chemistry and on the mixture fraction for the flow. This model describes well the behavior of diffusion flames, except at the flame tip, where instabilities can often occur. Numerical results are
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
11. Análise experimental e numérica do escoamento multifásico gás-sólido em ciclones
Gas-solid are involved in various industrial processes, mainly by low power consumption for the transport of solid particles via drag a gas stream. In these cases the recovery of solid or purification of gases is promoted by cyclonic separation. Several studies on cyclones are presented in the literature from experimental studies by numerical simulation with
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/02/2010
-
12. Experimental and numerical study of spouted bed fluif dynamics
Spouted beds, originally invented in Canada by Mathur and Gishler (1955) as an alternative to fluidized beds for handling coarse particles, are now widely studied in a variety of physical operations, such as drying, coating and granulation. In this work the particle velocity, minimum spouting flow rate and characteristic fluid-dynamic curves of the spouted b
Brazilian Journal of Chemical Engineering. Publicado em: 2008-03