Erosion Corrosion
Mostrando 1-12 de 18 artigos, teses e dissertações.
-
1. Temporal Evolution of Roughness Development on Polymer Surfaces Exposed to Non-Thermal Plasma
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
2. COVID-19, Sistema Renina-Angiotensina, Enzima Conversora da Angiotensina 2 e Nicotina: Qual a Inter-Relação?
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
Arq. Bras. Cardiol.. Publicado em: 2020-10
-
3. Presence of iron in polymers extruded with corrosive contaminants or abrasive fillers
Abstract Off-site measurements of the dimensions of extruder screws are used to monitor their wear. This wear causes the presence of metals in the processed polymer. We detected the presence of iron in polymers processed with corrosive contaminants or abrasive fillers. To this end we processed poly(ethylene terephthalate), PET, pure or contaminated with poly
Polímeros. Publicado em: 10/06/2019
-
4. Corrosion-cavitation-erosion: surface morphology study of a carbon steel in a multiphasic saline bath
ABSTRACT During the production of petroleum and gas, the equipments employed for this activity are subjected to synergetic wear mechanisms, such as corrosion, corrosion-cavitation and corrosion-cavitation-erosion. Laboratory experiments has been performed to reproduce some of these mechanisms, however, sometimes the tests is not capable to recreate the compl
Matéria (Rio J.). Publicado em: 20/05/2019
-
5. Efecto de los parámetros de aplicación en recubrimientos de Ni-Cr-B-Fe-Si obtenidos por Flame Spray
ABSTRACT Surface damage of components in service is an issue of great industrial interest because of the costs associated to the replacement of certain critical components. There are several techniques to generate coatings, which provide increased resistance to a particular type of surface damage. In this way, it is achieved surface protection to different s
Matéria (Rio J.). Publicado em: 02/08/2018
-
6. The Influences of Martensitic Transformations on Cavitation-Erosion Damage Initiation and Pitting Resistance of a Lean Austenitic Stainless Steel
This paper looks into the influences of martensitic transformations on the cavitation-erosion (CE) damage initiation mechanism and pitting corrosion resistance of a lean austenitic stainless steel. The ε and α' martensites are prime sites of CE damage initiation for this steel, whereas grain boundaries are more favourable damage initiation sites for other
Mat. Res.. Publicado em: 03/10/2016
-
7. Use of Electrochemical Tests for Assessment of the Effect of Erosive Particle Size on the Erosion-Corrosion Behaviour of AISI 304L Austenitic Stainless Steel
The degradation of AISI 304L stainless steel under static corrosion, liquid impingement and corrosion-erosion was studied using polarization curves. Static corrosion and liquid impingement tests were performed in 3.5% NaCl solution. Corrosion-erosion tests were performed in the same solution, containing 10 wt-% of three different SiO2 particle sizes. Synergi
Mat. Res.. Publicado em: 04/03/2016
-
8. Estudos das características técnicas e operacionais das galerias de águas pluviais como subsídios para gestão patrimonial e estabelecimento de diretrizes para projetos de sistemas de drenagem urbana
The purpose of this work is to study the emergence and evolution of pathological manifestations in urban stormwater channels and relate them to technical and operational characteristics of concrete structures so that plans for urban drainage systems management are developed, as well as new concepts for stormwater channel projects. The main reference is the D
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/04/2012
-
9. Evaluation of erosion-corrosion resistance in Fe-Mn-Al austenitic steels
In this paper, the effects of Mn and Al against corrosion/errosion resistance of three samples of the Fe-Mn-Al austenitic alloys are evaluated. The samples have composition Fe-(4,9 ~ 11,0 wt. (%)) Al-(17,49 ~ 34,3 wt. (%)) Mn-(0,43 ~ 1,25 wt. (%))C, those were prepared in an induction furnace from high purity materials. The alloys were evaluated in a compose
Mat. Res.. Publicado em: 18/12/2012
-
10. Corrosão-erosão da liga Cu10Ni-3Al-1, 3Fe em presença de íons cloreto, sulfeto e sulfato. / Corrosion-erosion of Cu10Ni-3Al-1, 3Fe alloy in the solution with chloride, sulfide or sulphate ions.
O presente trabalho teve como objetivos determinar a resistência à corrosão e as propriedades mecânicas da liga Cu10Ni-3Al-1,3Fe, nas condições solubilizada e envelhecida a 550°C. Foi também objetivo do trabalho identificar a microestrutura nestas condições de tratamento térmico. As propriedades mecânicas foram avaliadas a partir de ensaios de tr
Publicado em: 2010
-
11. Erosão, corrosão, erosão-corrosão e cavitação do aço ABNT 8550 nitretado a plasma / Erosion, Corrosion, Erosion-Corrosion and Cavitation of ABNT 8550 Plasmanitrided Steel
O aço ABNT 8550 é utilizado na construção de rotores de bombas multifásicas para exploração de petróleo em águas oceânicas profundas, o que justifica um estudo visando o aumento da resistência ao desgaste e à corrosão deste material. Neste trabalho, foram analisadas amostras nitretadas do aço ABNT 8550 com ênfase na resistência à erosão, co
Publicado em: 2008
-
12. Avaliação do efeito de particulados sólidos na eficiência de um inibidor de corrosão recomendado para meios salinos com CO2
The main problem on the exploration activity on petroleum industry is the formation water resulted on the fields producing. The aggravating of this problem is correlated with the advancing technologies used on the petroleum extractions and on its secondary approach objecting the reobtainment of this oil. Among the main contaminants of the water formation are
Publicado em: 2007