Environments Engineering
Mostrando 1-12 de 98 artigos, teses e dissertações.
-
1. Gender and science: An analysis of brazilian postgraduation
Resumo Questões de gênero estão presentes em diferentes ambientes de trabalho, inclusive no mundo acadêmico. Esta pesquisa de dados secundários objetivou comparar, por gênero, a distribuição e a produção científica de docentes brasileiros que atuam na pós-graduação stricto sensu. Construímos um protocolo de coleta para extrair dados disponibil
Estud. psicol. (Campinas). Publicado em: 05/12/2019
-
2. The Role of Terrestrial and Space Environments in Launch Vehicle Development
ABSTRACT: Natural (Terrestrial & Space) Environment (NE) phenomena play a significant role in the design and flight of aerospace vehicles and in the integrity of the associated aerospace systems and structures. Natural environmental design criteria guidelines described here are based on measurements and modeling of atmospheric and climatic phenomena relative
J. Aerosp. Technol. Manag.. Publicado em: 04/11/2019
-
3. GRAPHICAL REPRESENTATION ANALYSIS OF COMPLEMENTARY CIVIL PROJECTS USING "CAD 2D", "BIM" AND "RA" AND IDENTIFICATION OF INTERFERENCES
Abstract Technical graphic representation presents problems concerning the reduction of dimensionality from 3D to 2D. AEC (architecture, engineering and construction) projects usually adopt the top view paradigm with two-dimensional orthogonal projection. Recently, three major changes in technical representation were the alteration of orthogonal projection i
Bol. Ciênc. Geod.. Publicado em: 18/07/2019
-
4. Evaluation of Fracture Toughness of Ultraviolet-Irradiated Polycarbonate Using the Essential Work of Fracture Method
The essential work of fracture (EWF) method provides useful parameters to characterize the fracture toughness of polymers exposed to degrading environments under conditions associated with plane-stress state of failure. Exposure of polymeric engineering materials to ultraviolet (UV) radiation may produce macromolecular changes that impair their fracture toug
Mat. Res.. Publicado em: 26/07/2018
-
5. Effect of Thermal Treatment on the Dynamic Behaviors at a Fixed Loading Rate of Limestone in Quasi-vacuum and Air-filled Environments
Abstract Thermal damage in rock engineering occurs in the air-filled and quasi-vacuum environments of rock mass located near or far from the free surface. Meanwhile, dynamic loads are encountered frequently in engineering practice. In this study, 39 limestone samples are prepared, and a series of laboratory tests, including split Hopkinson pressure bar (SHP
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
6. Free vibration analysis and design optimization of SMA/Graphite/Epoxy composite shells in thermal environments
Abstract Composite shells, which are being widely used in engineering applications, are often under thermal loads. Thermal loads usually bring thermal stresses in the structure which can significantly affect its static and dynamic behaviors. One of the possible solutions for this matter is embedding Shape Memory Alloy (SMA) wires into the structure. In the
Lat. Am. j. solids struct.. Publicado em: 23/04/2018
-
7. ESCollab: Uma Metodologia Colaborativa voltada para o Ensino de Engenharia de Software
Among all the activities performed by human beings today, software development is one of the most recent in historical terms, but one of the most important due to the increasing digitalization of the society. On the other hand, the growing importance of collaborative environments, in a globalized world, has enabled the sharing of information and the interact
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/04/2012
-
8. TEACH-ME: implementation of mobile environments to the teach - learning process
The research project TEACH-ME (Technology, Engineering Calculus and Hewlett-Packard Mobile Environment) presents an educational proposal that seeks to innovate the teaching and learning processes of mathematics, Logic Basic Programming and Management of Information, through the introduction of collaborative working environments, in order to provide the integ
JISTEM - Journal of Information Systems and Technology Management. Publicado em: 2011
-
9. Integrating mixed-reality remote experiments into virtual learning environments using interchangeable components
This paper presents a proposal to integrate mixedreality remote experiments into virtual learning environments (VLEs) using the concept of interchangeable components, which can represent either real or virtual devices or software in industrial automation systems. Combinations of real and virtual technical plants and automation systems are used in different l
Publicado em: 2011
-
10. Uma proposta de meta-escalonamento e execução de workflows WS-BPEL em ambientes multi-cluster / A proposal for meta-scheduling and execution of WS-BPEL workflows in multi-cluster environments
A utilização de sistemas distribuídos heterogêneos, tais como os Multi-Clusters, também chamados de Clusters de Clusters (CoC), e as grades computacionais, permite o desenvolvimento de sistemas computacionais mais complexos. No entanto, alguns desses sistemas requerem que os serviços sejam facilmente compostos e executados, mantendo as dependências en
Publicado em: 2010
-
11. Investigação sobre a aplicabilidade dos métodos de avaliação de comunicabilidade ao domínio educacional
More and more teachers have made use of technology as a tool to facilitate the process of teaching and learning. The increasing use of this technology in the classroom brings new challenges for the design and evaluation of educational environments, especially for the design of interfaces. Among these challenges is the need to assess learning by students, as
Publicado em: 2010
-
12. Um estudo sobre objetos com comportamento inteligente / A study on objects with intelligent behavior
Diversos estudos têm sido realizados com o objetivo de definir estruturas para construção de ambientes de desenvolvimento de software. Alguns desses estudos indicam a necessidade de prover inteligência a tais ambientes, para que estes, efetivamente, coordenem e auxiliem o processo de desenvolvimento de software. O paradigma da orientação a objetos (POO
Publicado em: 2010