Electromagnetic Filter
Mostrando 1-12 de 16 artigos, teses e dissertações.
-
1. Design and Implementation of Microwave Dual-Band Pass Interdigital Filter Using an Analytical Approach
Abstract In this paper, benefiting from frequency transformation between the normalized frequency domain of low-pass prototype frequencies and the real frequency domain of the filter, a purely analytical procedure for dual-band filter design is used. The coupling matrix of the filter is analytically extracted, without the need to perform numerical optimizati
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. PREPARATION AND CHARACTERIZATION OF A QUERCETIN-TETRAETHYL ETHER-BASED PHOTOPROTECTIVE NANOEMULSION
Although Quercetin absorbs in the UVA/UVB electromagnetic region, it is limited for applications as a UV filter due to its low lipophilicity and capacity to penetrate the epidermis. In order to overcome this limitation, we synthetized and evaluated the photo protective properties of a derivative obtained from Quercetin. The derivative was prepared by alkylat
Quím. Nova. Publicado em: 27/05/2019
-
3. A Novel Design of an H-shaped Microstrip Diplexer
Abstract In this paper, a new microstrip diplexer using modified H-shaped resonators with a compact size and high isolation is presented. This circuit is designed for the ISM band at 2.4 GHz and GPS at 1.575 GHz. The proposed diplexer is formed by connecting two band-pass filters designed by using the modified H-shaped resonator and tapped microstrip Input/o
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-12
-
4. Micro-motion Recognition of Spatial Cone Target Based on ISAR Image Sequences
ABSTRACT The accurate micro-motions recognition of spatial cone target is the foundation of the characteristic parameter acquisition. For this reason, a micro-motion recognition method based on the distinguishing characteristics extracted from the Inverse Synthetic Aperture Radar (ISAR) sequences is proposed in this paper. The projection trajectory formula o
J. Aerosp. Technol. Manag.. Publicado em: 2016-06
-
5. Design of Frequency Selective Band Stop Shield Using Analytical Method
Abstract In this article, a high-order frequency selective band-stop EMC (electromagnetic compatibility) shield is designed using multilayer square loop while each loop resonates at the specific desired frequency. The glass material is picked out as the preferred substrate for the designing process. In contrast to the computationally intensive numerical appr
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2015-12
-
6. Electromagnetic interference reduction by dynamic impedance balancing applied to biosensors
INTRODUCTION: Electromagnetic interference caused by electric power lines adversely affects the signals of electronic instruments, especially those with low amplitude levels. This type of interference is known as common-mode interference. There are many methods and architectures used to minimize the influence of this kind of interference on electronic instru
Rev. Bras. Eng. Bioméd.. Publicado em: 2013-09
-
7. Utilização de filtro neural adaptativo para eliminar níveis de CC na estimação do conjugado eletromagnético em motores de indução trifásico / APPLICATION OF AN ADAPTIVE NEURAL FILTER NETWORK IN ORDER TO CUT OFF THE DC COMPONENT TO ESTIMATE THE ELECTROMAGNETIC TORQUE OF THREE-PHASE INDUCTION MOTORS
Apresenta-se neste trabalho um estudo do emprego de rede neural ADALINE funcionando como notch filter, aplicada na estimação do fluxo estatórico para consequente obtenção do conjugado eletromagnético de Motores de Indução Trifásicos (MIT). A estimação do fluxo do estator foi feita por meio do modelo de tensão da máquina de indução, em que é a
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/03/2012
-
8. Optimal design of double folded stub microstrip filter by neural network modelling and particle swarm optimization
Optimization of design parameters based on electromagnetic simulation of microwave circuits is a timeconsuming and iterative procedure. To provide a fast and accurate frequency response for a given case study, this paper employs a neural network modelling approach. First, one of the case study's outputs, i.e., scattering parameter (|S21|) in dB, is predicted
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2012-06
-
9. Estratégia para estimação do conjugado eletromagnético de motores de indução / STRATEGY FOR THE ESTIMATION OF TORQUE ELECTROMAGNETIC INDUCTION MOTORS
The purpose of this work is to develop a strategy for determining the electromagnetic torque of induction motors (MIT) from the stator flux estimation, which presents higher robustness against parametric variations. The stator flux is estimated by integrating the voltage model of the machine, applying Highpass Filters (HFP) for ideal integration of electromo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/05/2011
-
10. Estudo de viabilidade de integração de micro-lâmpadas incandescentes com filtros interferenciais. / Study of viability of integration of incandescent micro-lamps with interferometric filters.
In the present work was realized a study of the viability of integrating two optical devices: incandescent micro-lamps and interferometric filters with the intention of obtaining a single device with specific characteristics. The fabrication of these optical devices was made using dielectric materials, obtained by plasma-enhanced chemical vapor deposition (P
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/04/2011
-
11. Aplication of unscented transformed (ut) for design filters microwave / Aplicação da transformada de incerteza (ut) para projeto de filtros de microondas
The manufacture of complex filters and their tests depend on electromagnetic simulation for validation and correct analysis. However, in the filter assembly, the fabrication process introduces new sources of uncertainty that are difficult to model with the electromagnetic simulator. The result may be significant differences between the simulated responses an
Publicado em: 2010
-
12. Projeto de filtros para atenuação de correntes de modo comum e de sobretensões em acionamentos de motores elétricos utilizando inversores PWM
The use of inverters in most of electrical motor drives applications has been accompanie by several undesirable effects, such as overvoltage at the motor terminals, circulation of common mode currents and electromagnetic interference problems. The determining factors for most of these problems come with the high switching speed and frequency of the semicondu
Publicado em: 2010